Set up gcc environment - 3.3
Checking if your kit is complete...
Looks good
Writing Makefile for Devel::Required
cp lib/Devel/Required.pm blib/lib/Devel/Required.pm
Manifying blib/man3/Devel::Required.3
PERL_DL_NONLAZY=1 /export/home/cpanrun/build/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/Required01....1..37
Set up gcc environment - 3.3
ok 1 - use ExtUtils::MakeMaker;
ok 2 - use Devel::Required;
ok 3 - Devel::Required->can('import')
ok 4 - Failed to open Foo.pm: 
ok 5 - Failed to close Foo.pm: 
ok 6 - Check if Foo.pm exists
ok 7 - Failed to open Bar.pm: 
ok 8 - Failed to close Bar.pm: 
ok 9 - Check if Bar.pm exists
ok 10 - Failed to open Baz.pm: 
ok 11 - Failed to close Baz.pm: 
ok 12 - Check if Baz.pm exists
ok 13 - Failed to open README for writing: 
ok 14 - Failed to close README for writing: 
ok 15 - Check if README exists
Writing Makefile for Foo
ok 16 - Check if Makefile exists
ok 17 - Failed to open README for reading: 
ok 18 - Check if README conversion successful
ok 19 - Failed to close README: 
ok 20 - Failed to open Foo.pm for reading: 
ok 21 - Check if Foo.pm conversion successful
ok 22 - Failed to close Foo.pm: 
Writing Makefile for Foo
ok 23 - Check if Makefile exists
ok 24 - Failed to open README for reading: 
ok 25 - Check if README conversion successful
ok 26 - Failed to close README: 
ok 27 - Failed to open Foo.pm for reading: 
ok 28 - Check if Foo.pm conversion successful
ok 29 - Failed to close Foo.pm: 
Writing Makefile for Foo
ok 30 - Check if Makefile exists
ok 31 - Failed to open README for reading: 
ok 32 - Check if README conversion successful
ok 33 - Failed to close README: 
ok 34 - Failed to open Foo.pm for reading: 
ok 35 - Check if Foo.pm conversion successful
ok 36 - Failed to close Foo.pm: 
ok 37 - Check if all files removed
ok
t/Required02....1..21
Set up gcc environment - 3.3
ok 1 - Failed to open Foo.pm: 
ok 2 - Failed to close Foo.pm: 
ok 3 - Check if Foo.pm exists
ok 4 - Failed to open Bar.pm: 
ok 5 - Failed to close Bar.pm: 
ok 6 - Check if Bar.pm exists
ok 7 - Failed to open Baz.pm: 
ok 8 - Failed to close Baz.pm: 
ok 9 - Check if Baz.pm exists
ok 10 - Failed to open README for writing: 
ok 11 - Failed to close README for writing: 
ok 12 - Check if README exists
Writing Makefile for Foo
ok 13 - Check if Makefile exists
ok 14 - Failed to open README for reading: 
ok 15 - Check if README conversion successful
ok 16 - Failed to close README: 
ok 17 - Failed to open Foo.pm for reading: 
ok 18 - Check if Foo.pm conversion successful
ok 19 - Failed to close Foo.pm: 
ok 20 - Check if all files removed
ok 21 - Check if error caught
ok
All tests successful.
Files=2, Tests=58,  3 wallclock secs ( 2.16 cusr +  0.39 csys =  2.55 CPU)
Installing /export/home/cpanrun/build/5.10.0/html/site/lib/Devel/Required.html
Installing /export/home/cpanrun/build/5.10.0/site/lib/Devel/Required.pm
Installing /export/home/cpanrun/build/5.10.0/site/man/man3/Devel::Required.3
Appending installation info to /export/home/cpanrun/build/5.10.0/lib/perllocal.pod