Do you want to install 'srs', the SRS command line interface? [y] y
Do you want to install 'srsd', the SRS address translation daemon? [y] y
Checking if your kit is complete...
Looks good
Writing Makefile for Mail::SRS
cp lib/Mail/SRS/Reversable.pm blib/lib/Mail/SRS/Reversable.pm
cp lib/Mail/SRS/DB.pm blib/lib/Mail/SRS/DB.pm
cp lib/Mail/SRS/Shortcut.pm blib/lib/Mail/SRS/Shortcut.pm
cp lib/Mail/SRS.pm blib/lib/Mail/SRS.pm
cp lib/Mail/SRS/Reversible.pm blib/lib/Mail/SRS/Reversible.pm
cp lib/Mail/SRS/Guarded.pm blib/lib/Mail/SRS/Guarded.pm
cp lib/Mail/SRS/Daemon.pm blib/lib/Mail/SRS/Daemon.pm
cp srsd blib/script/srsd
/home/cpanrun/tmp/5.10.0/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/srsd
cp srs blib/script/srs
/home/cpanrun/tmp/5.10.0/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/srs
Manifying blib/man1/srsd.1
Manifying blib/man1/srs.1
Manifying blib/man3/Mail::SRS::Shortcut.3
Manifying blib/man3/Mail::SRS::DB.3
Manifying blib/man3/Mail::SRS.3
Manifying blib/man3/Mail::SRS::Guarded.3
Manifying blib/man3/Mail::SRS::Reversible.3
Manifying blib/man3/Mail::SRS::Daemon.3
PERL_DL_NONLAZY=1 /home/cpanrun/tmp/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/01_basic...........1..22
ok 1 - use Mail::SRS;
ok 2 - Created an object
ok 3 - The object isa Mail::SRS
ok 4 - Secret was stored OK
ok 5 - Secret was updated OK
ok 6 - Old secret was preserved
ok 7 - Hashing seems to work
ok 8 - Hashes verify OK
ok 9 - Bad hashes fail hash verify
ok 10 - Wrong data fails hash verify
ok 11 - Created a timestamp
ok 12 - Timestamp is 2 characters
ok 13 - Timestamp verifies
ok 14 - Past timestamp is OK
ok 15 - Antique timestamp fails
ok 16 - Future timestamp fails
ok 17 - Future timestamp fails
ok 18 - Timestamp verifies
ok 19 - Past timestamp is OK
ok 20 - Antique timestamp ignored
ok 21 - Future timestamp ignored
ok 22 - Future timestamp ignored
ok
t/02_guarded.........1..35
ok 1 - use Mail::SRS;
ok 2 - Created an object
ok 3 - The object isa Mail::SRS
ok 4 - The object isa Mail::SRS::Shortcut
ok 5 - The object isa Mail::SRS::Guarded
ok 6 - Can still call methods on new object
ok 7 - Made a new address
ok 8 - It is an SRS0 address
ok 9 - Reversed the address
ok 10 - The reversal was idempotent
ok 11 - Made another new address with the SRS address
ok 12 - It is an SRS1 address
ok 13 - It is not an SRS0 address
ok 14 - Reversed the address again
ok 15 - It is the original SRS0 address
ok 16 - Got back the original sender
ok 17 - Error detected reversing garbage
ok 18 - Trapped a hashless SRS1 address!
ok 19 - Reversed a hashless SRS1 address
ok 20 - Idempotent on user@domain-with-dash.com
ok 21 - Idempotent on SRS0=RNuA=QW=domain-with-dash.com=user@host0.tld0
ok 22 - Idempotent from same domain
ok 23 - AlwaysRewrite works from same domain
ok 24 - Idempotent on user-with-dash@domain.com
ok 25 - Idempotent on SRS0=w3Op=QW=domain.com=user-with-dash@host0.tld0
ok 26 - Idempotent from same domain
ok 27 - AlwaysRewrite works from same domain
ok 28 - Idempotent on user+with+plus@domain.com
ok 29 - Idempotent on SRS0=2YfO=QW=domain.com=user+with+plus@host0.tld0
ok 30 - Idempotent from same domain
ok 31 - AlwaysRewrite works from same domain
ok 32 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 33 - Idempotent on SRS0=kM0P=QW=domain.somewhere=user%with!everything&everything=@host0.tld0
ok 34 - Idempotent from same domain
ok 35 - AlwaysRewrite works from same domain
ok
t/03_reversible......1..13
ok 1 - use Mail::SRS::Reversible;
ok 2 - Created an object
ok 3 - The object isa Mail::SRS
ok 4 - The object isa Mail::SRS::Reversible
ok 5 - Can still call methods on new object
ok 6 - Made a new address
ok 7 - It is an SRS address
ok 8 - Reversed the address
ok 9 - The reversal was idempotent
ok 10 - Made another new address with the SRS address
ok 11 - It is an SRS address
ok 12 - Reversed the address again
ok 13 - The reversal was idempotent again
ok
t/04_dbm.............1..14
ok 1 - use Mail::SRS::DB;
ok 2 - Created an object
ok 3 - The object isa Mail::SRS
ok 4 - The object isa Mail::SRS::DB
ok 5 - Can still call methods on new object
ok 6 - Made a new address
ok 7 - It is an SRS address
ok 8 - Reversed the address
ok 9 - The reversal was idempotent
ok 10 - Made another new address with the SRS address
ok 11 - It is an SRS address
ok 12 - Reversed the address again
ok 13 - The reversal was idempotent again
ok 14 - The reversal was idempotent over store
ok
t/05_shortcut........1..17
ok 1 - use Mail::SRS::Shortcut;
ok 2 - Created an object
ok 3 - The object isa Mail::SRS
ok 4 - The object isa Mail::SRS::Shortcut
ok 5 - Can still call methods on new object
ok 6 - Made a new address
ok 7 - It is an SRS address
ok 8 - Reversed the address
ok 9 - The reversal was idempotent
ok 10 - Made another new address with the SRS address
ok 11 - It is an SRS address
ok 12 - Reversed the address again
ok 13 - Got back the original sender
ok 14 - Idempotent on user@domain-with-dash.com
ok 15 - Idempotent on user-with-dash@domain.com
ok 16 - Idempotent on user+with+plus@domain.com
ok 17 - Idempotent on user%with!everything&everything=@domain.somewhere
ok
t/06_separator.......1..65
ok 1 - use Mail::SRS;
ok 2 - Created an object
ok 3 - Got the expected separator
ok 4 - It uses the right initial separator
ok 5 - Reversed the address
ok 6 - The reversal was idempotent
ok 7 - Made another new address with the SRS address
ok 8 - It uses the right initial separator too
ok 9 - Reversed the address again
ok 10 - Got an SRS0 address
ok 11 - It is the original SRS0 address
ok 12 - Got back the original sender
ok 13 - Idempotent on user@domain-with-dash.com
ok 14 - Idempotent on SRS0-RNuA=QW=domain-with-dash.com=user@host0.tld0
ok 15 - Idempotent on user-with-dash@domain.com
ok 16 - Idempotent on SRS0-w3Op=QW=domain.com=user-with-dash@host0.tld0
ok 17 - Idempotent on user+with+plus@domain.com
ok 18 - Idempotent on SRS0-2YfO=QW=domain.com=user+with+plus@host0.tld0
ok 19 - Idempotent on user=with=equals@domain.com
ok 20 - Idempotent on SRS0-osXC=QW=domain.com=user=with=equals@host0.tld0
ok 21 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 22 - Idempotent on SRS0-kM0P=QW=domain.somewhere=user%with!everything&everything=@host0.tld0
ok 23 - Created an object
ok 24 - Got the expected separator
ok 25 - It uses the right initial separator
ok 26 - Reversed the address
ok 27 - The reversal was idempotent
ok 28 - Made another new address with the SRS address
ok 29 - It uses the right initial separator too
ok 30 - Reversed the address again
ok 31 - Got an SRS0 address
ok 32 - It is the original SRS0 address
ok 33 - Got back the original sender
ok 34 - Idempotent on user@domain-with-dash.com
ok 35 - Idempotent on SRS0+RNuA=QW=domain-with-dash.com=user@host0.tld0
ok 36 - Idempotent on user-with-dash@domain.com
ok 37 - Idempotent on SRS0+w3Op=QW=domain.com=user-with-dash@host0.tld0
ok 38 - Idempotent on user+with+plus@domain.com
ok 39 - Idempotent on SRS0+2YfO=QW=domain.com=user+with+plus@host0.tld0
ok 40 - Idempotent on user=with=equals@domain.com
ok 41 - Idempotent on SRS0+osXC=QW=domain.com=user=with=equals@host0.tld0
ok 42 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 43 - Idempotent on SRS0+kM0P=QW=domain.somewhere=user%with!everything&everything=@host0.tld0
ok 44 - Created an object
ok 45 - Got the expected separator
ok 46 - It uses the right initial separator
ok 47 - Reversed the address
ok 48 - The reversal was idempotent
ok 49 - Made another new address with the SRS address
ok 50 - It uses the right initial separator too
ok 51 - Reversed the address again
ok 52 - Got an SRS0 address
ok 53 - It is the original SRS0 address
ok 54 - Got back the original sender
ok 55 - Idempotent on user@domain-with-dash.com
ok 56 - Idempotent on SRS0=RNuA=QW=domain-with-dash.com=user@host0.tld0
ok 57 - Idempotent on user-with-dash@domain.com
ok 58 - Idempotent on SRS0=w3Op=QW=domain.com=user-with-dash@host0.tld0
ok 59 - Idempotent on user+with+plus@domain.com
ok 60 - Idempotent on SRS0=2YfO=QW=domain.com=user+with+plus@host0.tld0
ok 61 - Idempotent on user=with=equals@domain.com
ok 62 - Idempotent on SRS0=osXC=QW=domain.com=user=with=equals@host0.tld0
ok 63 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 64 - Idempotent on SRS0=kM0P=QW=domain.somewhere=user%with!everything&everything=@host0.tld0
ok 65 - Failed to create object with bad separator
ok
t/07_varysep.........1..44
ok 1 - use Mail::SRS;
ok 2 - use Mail::SRS::Guarded;
ok 3 - use Mail::SRS::Reversible;
ok 4 - use Mail::SRS::Shortcut;
ok 5 - Idempotent on user@domain-with-dash.com
ok 6 - S2 idempotent on SRS0+RNuA=QW=domain-with-dash.com=user@host.com
ok 7 - Guarded S3 idempotent on SRS1-leEo=host.com=+RNuA=QW=domain-with-dash.com=user@forwarder.com
ok 8 - Idempotent on user-with-dash@domain.com
ok 9 - S2 idempotent on SRS0+w3Op=QW=domain.com=user-with-dash@host.com
ok 10 - Guarded S3 idempotent on SRS1-TW7D=host.com=+w3Op=QW=domain.com=user-with-dash@forwarder.com
ok 11 - Idempotent on user+with+plus@domain.com
ok 12 - S2 idempotent on SRS0+2YfO=QW=domain.com=user+with+plus@host.com
ok 13 - Guarded S3 idempotent on SRS1-dzCG=host.com=+2YfO=QW=domain.com=user+with+plus@forwarder.com
ok 14 - Idempotent on user=with=equals@domain.com
ok 15 - S2 idempotent on SRS0+osXC=QW=domain.com=user=with=equals@host.com
ok 16 - Guarded S3 idempotent on SRS1-1p+m=host.com=+osXC=QW=domain.com=user=with=equals@forwarder.com
ok 17 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 18 - S2 idempotent on SRS0+kM0P=QW=domain.somewhere=user%with!everything&everything=@host.com
ok 19 - Guarded S3 idempotent on SRS1-7kqe=host.com=+kM0P=QW=domain.somewhere=user%with!everything&everything=@forwarder.com
ok 20 - Idempotent on user@domain-with-dash.com
ok 21 - S2 idempotent on SRS0+RNuA=QW=domain-with-dash.com=user@host.com
ok 22 - Reversible S3 idempotent on SRS0-SzsI=QW=host.com=SRS0+RNuA=QW=domain-with-dash.com=user@forwarder.com
ok 23 - Idempotent on user-with-dash@domain.com
ok 24 - S2 idempotent on SRS0+w3Op=QW=domain.com=user-with-dash@host.com
ok 25 - Reversible S3 idempotent on SRS0-K/Ze=QW=host.com=SRS0+w3Op=QW=domain.com=user-with-dash@forwarder.com
ok 26 - Idempotent on user+with+plus@domain.com
ok 27 - S2 idempotent on SRS0+2YfO=QW=domain.com=user+with+plus@host.com
ok 28 - Reversible S3 idempotent on SRS0-QMVJ=QW=host.com=SRS0+2YfO=QW=domain.com=user+with+plus@forwarder.com
ok 29 - Idempotent on user=with=equals@domain.com
ok 30 - S2 idempotent on SRS0+osXC=QW=domain.com=user=with=equals@host.com
ok 31 - Reversible S3 idempotent on SRS0-7RVf=QW=host.com=SRS0+osXC=QW=domain.com=user=with=equals@forwarder.com
ok 32 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 33 - S2 idempotent on SRS0+kM0P=QW=domain.somewhere=user%with!everything&everything=@host.com
ok 34 - Reversible S3 idempotent on SRS0-eSJF=QW=host.com=SRS0+kM0P=QW=domain.somewhere=user%with!everything&everything=@forwarder.com
ok 35 - Idempotent on user@domain-with-dash.com
ok 36 - Shortcut S2 idempotent on user@domain-with-dash.com
ok 37 - Idempotent on user-with-dash@domain.com
ok 38 - Shortcut S2 idempotent on user-with-dash@domain.com
ok 39 - Idempotent on user+with+plus@domain.com
ok 40 - Shortcut S2 idempotent on user+with+plus@domain.com
ok 41 - Idempotent on user=with=equals@domain.com
ok 42 - Shortcut S2 idempotent on user=with=equals@domain.com
ok 43 - Idempotent on user%with!everything&everything=@domain.somewhere
ok 44 - Shortcut S2 idempotent on user%with!everything&everything=@domain.somewhere
ok
t/08_caseless........1..34
ok 1 - use Mail::SRS;
ok 2 - use Mail::SRS::Guarded;
ok 3 - use Mail::SRS::Reversible;
ok 4 - use Mail::SRS::Shortcut;
ok 5 - Idempotent on User@domain-with-dash.com
ok 6 - S2 idempotent on srs0+rnua=qw=domain-with-dash.com=user@host.com
ok 7 - Idempotent on User-with-dash@domain.com
ok 8 - S2 idempotent on srs0+w3op=qw=domain.com=user-with-dash@host.com
ok 9 - Idempotent on User+with+plus@domain.com
ok 10 - S2 idempotent on srs0+2yfo=qw=domain.com=user+with+plus@host.com
ok 11 - Idempotent on User=with=equals@domain.com
ok 12 - S2 idempotent on srs0+osxc=qw=domain.com=user=with=equals@host.com
ok 13 - Idempotent on User%with!everything&everything=@domain.somewhere
ok 14 - S2 idempotent on srs0+km0p=qw=domain.somewhere=user%with!everything&everything=@host.com
ok 15 - Idempotent on User@domain-with-dash.com
ok 16 - S2 idempotent on srs0+rnua=qw=domain-with-dash.com=user@host.com
ok 17 - Idempotent on User-with-dash@domain.com
ok 18 - S2 idempotent on srs0+w3op=qw=domain.com=user-with-dash@host.com
ok 19 - Idempotent on User+with+plus@domain.com
ok 20 - S2 idempotent on srs0+2yfo=qw=domain.com=user+with+plus@host.com
ok 21 - Idempotent on User=with=equals@domain.com
ok 22 - S2 idempotent on srs0+osxc=qw=domain.com=user=with=equals@host.com
ok 23 - Idempotent on User%with!everything&everything=@domain.somewhere
ok 24 - S2 idempotent on srs0+km0p=qw=domain.somewhere=user%with!everything&everything=@host.com
ok 25 - Idempotent on User@domain-with-dash.com
ok 26 - Shortcut S2 idempotent on User@domain-with-dash.com
ok 27 - Idempotent on User-with-dash@domain.com
ok 28 - Shortcut S2 idempotent on User-with-dash@domain.com
ok 29 - Idempotent on User+with+plus@domain.com
ok 30 - Shortcut S2 idempotent on User+with+plus@domain.com
ok 31 - Idempotent on User=with=equals@domain.com
ok 32 - Shortcut S2 idempotent on User=with=equals@domain.com
ok 33 - Idempotent on User%with!everything&everything=@domain.somewhere
ok 34 - Shortcut S2 idempotent on User%with!everything&everything=@domain.somewhere
ok
t/10_pod.............1..9
ok 1 - blib/script/srsd
ok 2 - blib/script/srs
ok 3 - blib/lib/Mail/SRS.pm
ok 4 - blib/lib/Mail/SRS/DB.pm
ok 5 - blib/lib/Mail/SRS/Shortcut.pm
ok 6 - blib/lib/Mail/SRS/Reversable.pm
ok 7 - blib/lib/Mail/SRS/Reversible.pm
ok 8 - blib/lib/Mail/SRS/Guarded.pm
ok 9 - blib/lib/Mail/SRS/Daemon.pm
ok
t/11_pod_coverage....1..0 # Skip Test::Pod::Coverage 0.02 required for testing POD
# coverage
skipped
        all skipped: Test::Pod::Coverage 0.02 required for testing POD
t/20_cmdline.........1..1
ok 1 - Parsed script!
ok
t/21_daemon..........1..3
ok 1 - use Mail::SRS::Daemon;
ok 2 - Created an object
ok 3 - The object isa Mail::SRS::Daemon
ok
All tests successful, 1 test skipped.
Files=12, Tests=257,  2 wallclock secs ( 1.35 cusr +  0.44 csys =  1.79 CPU)
Installing /home/cpanrun/build/5.10.0/html/site/lib/Mail/SRS.html
Installing /home/cpanrun/build/5.10.0/html/site/lib/Mail/SRS/Reversible.html
Installing /home/cpanrun/build/5.10.0/html/site/lib/Mail/SRS/Daemon.html
Installing /home/cpanrun/build/5.10.0/html/site/lib/Mail/SRS/Shortcut.html
Installing /home/cpanrun/build/5.10.0/html/site/lib/Mail/SRS/DB.html
Installing /home/cpanrun/build/5.10.0/html/site/lib/Mail/SRS/Guarded.html
Installing /home/cpanrun/build/5.10.0/html/bin/srsd.html
Installing /home/cpanrun/build/5.10.0/html/bin/srs.html
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS.pm
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS/DB.pm
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS/Shortcut.pm
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS/Reversable.pm
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS/Reversible.pm
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS/Guarded.pm
Installing /home/cpanrun/build/5.10.0/site/lib/Mail/SRS/Daemon.pm
Installing /home/cpanrun/build/5.10.0/site/man/man1/srsd.1
Installing /home/cpanrun/build/5.10.0/site/man/man1/srs.1
Installing /home/cpanrun/build/5.10.0/site/man/man3/Mail::SRS::Daemon.3
Installing /home/cpanrun/build/5.10.0/site/man/man3/Mail::SRS::Shortcut.3
Installing /home/cpanrun/build/5.10.0/site/man/man3/Mail::SRS::Guarded.3
Installing /home/cpanrun/build/5.10.0/site/man/man3/Mail::SRS::DB.3
Installing /home/cpanrun/build/5.10.0/site/man/man3/Mail::SRS.3
Installing /home/cpanrun/build/5.10.0/site/man/man3/Mail::SRS::Reversible.3
Installing /home/cpanrun/build/5.10.0/site/bin/srsd
Installing /home/cpanrun/build/5.10.0/site/bin/srs
Appending installation info to /home/cpanrun/build/5.10.0/lib/perllocal.pod