### IMPORTANT! ###################################################### As of CPANPLUS 0.070, configuration during 'perl Makefile.PL' is no longer required. A default config is now shipped that should work out of the box on most machines, for priviliged and unprivileged users. If you wish to configure CPANPLUS to your environment, you can either do that from the interactive shell after installation: $ cpanp CPAN Terminal> s reconfigure Or you can invoke this program as follows, to do it now: $ C:\cpanrun\build\5-10-0\bin\perl.exe Makefile.PL --setup This also means that any config created by any CPANPLUS older than 0.070 will no longer work, and you are required to reconfigure. See the ChangeLog file for details. We appologize for the inconvenience. Checking if your kit is complete... Looks good Writing Makefile for CPANPLUS Microsoft (R) Program Maintenance Utility Version 6.00.8168.0 Copyright (C) Microsoft Corp 1988-1998. All rights reserved. cp lib/CPANPLUS/Backend/RV.pm blib\lib\CPANPLUS\Backend\RV.pm cp lib/CPANPLUS/Shell/Default.pm blib\lib\CPANPLUS\Shell\Default.pm cp lib/CPANPLUS/Internals/Constants/Report.pm blib\lib\CPANPLUS\Internals\Constants\Report.pm cp lib/CPANPLUS/Module.pm blib\lib\CPANPLUS\Module.pm cp lib/CPANPLUS/Module/Author.pm blib\lib\CPANPLUS\Module\Author.pm cp lib/CPANPLUS/inc.pm blib\lib\CPANPLUS\inc.pm cp lib/CPANPLUS/Configure/Setup.pm blib\lib\CPANPLUS\Configure\Setup.pm cp lib/CPANPLUS/Shell.pm blib\lib\CPANPLUS\Shell.pm cp lib/CPANPLUS/Module/Checksums.pm blib\lib\CPANPLUS\Module\Checksums.pm cp lib/CPANPLUS/Dist/MM.pm blib\lib\CPANPLUS\Dist\MM.pm cp lib/CPANPLUS/Internals.pm blib\lib\CPANPLUS\Internals.pm cp lib/CPANPLUS/Module/Signature.pm blib\lib\CPANPLUS\Module\Signature.pm cp lib/CPANPLUS/Hacking.pod blib\lib\CPANPLUS\Hacking.pod cp lib/CPANPLUS.pm blib\lib\CPANPLUS.pm cp lib/CPANPLUS/Shell/Default/Plugins/Remote.pm blib\lib\CPANPLUS\Shell\Default\Plugins\Remote.pm cp lib/CPANPLUS/Backend.pm blib\lib\CPANPLUS\Backend.pm cp lib/CPANPLUS/Internals/Report.pm blib\lib\CPANPLUS\Internals\Report.pm cp lib/CPANPLUS/Module/Author/Fake.pm blib\lib\CPANPLUS\Module\Author\Fake.pm cp lib/CPANPLUS/FAQ.pod blib\lib\CPANPLUS\FAQ.pod cp lib/CPANPLUS/Config.pm blib\lib\CPANPLUS\Config.pm cp lib/CPANPLUS/Internals/Utils.pm blib\lib\CPANPLUS\Internals\Utils.pm cp lib/CPANPLUS/Shell/Default/Plugins/Source.pm blib\lib\CPANPLUS\Shell\Default\Plugins\Source.pm cp lib/CPANPLUS/Internals/Source.pm blib\lib\CPANPLUS\Internals\Source.pm cp lib/CPANPLUS/Internals/Fetch.pm blib\lib\CPANPLUS\Internals\Fetch.pm cp lib/CPANPLUS/Shell/Classic.pm blib\lib\CPANPLUS\Shell\Classic.pm cp lib/CPANPLUS/Dist.pm blib\lib\CPANPLUS\Dist.pm cp lib/CPANPLUS/Configure.pm blib\lib\CPANPLUS\Configure.pm cp lib/CPANPLUS/Selfupdate.pm blib\lib\CPANPLUS\Selfupdate.pm cp lib/CPANPLUS/Internals/Search.pm blib\lib\CPANPLUS\Internals\Search.pm cp lib/CPANPLUS/Internals/Extract.pm blib\lib\CPANPLUS\Internals\Extract.pm cp lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm blib\lib\CPANPLUS\Shell\Default\Plugins\CustomSource.pm cp lib/CPANPLUS/Dist/Sample.pm blib\lib\CPANPLUS\Dist\Sample.pm cp lib/CPANPLUS/Internals/Utils/Autoflush.pm blib\lib\CPANPLUS\Internals\Utils\Autoflush.pm cp lib/CPANPLUS/Error.pm blib\lib\CPANPLUS\Error.pm cp lib/CPANPLUS/Module/Fake.pm blib\lib\CPANPLUS\Module\Fake.pm cp lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod blib\lib\CPANPLUS\Shell\Default\Plugins\HOWTO.pod cp lib/CPANPLUS/Dist/Base.pm blib\lib\CPANPLUS\Dist\Base.pm cp lib/CPANPLUS/Internals/Constants.pm blib\lib\CPANPLUS\Internals\Constants.pm C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" -MExtUtils::Command -e cp bin/cpanp-run-perl blib\script\cpanp-run-perl pl2bat.bat blib\script\cpanp-run-perl C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" -MExtUtils::Command -e cp bin/cpan2dist blib\script\cpan2dist pl2bat.bat blib\script\cpan2dist C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" -MExtUtils::Command -e cp bin/cpanp blib\script\cpanp pl2bat.bat blib\script\cpanp Microsoft (R) Program Maintenance Utility Version 6.00.8168.0 Copyright (C) Microsoft Corp 1988-1998. All rights reserved. C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" -MExtUtils::Command -e cp bin/cpanp-run-perl blib\script\cpanp-run-perl pl2bat.bat blib\script\cpanp-run-perl C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" -MExtUtils::Command -e cp bin/cpan2dist blib\script\cpan2dist pl2bat.bat blib\script\cpan2dist C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" -MExtUtils::Command -e cp bin/cpanp blib\script\cpanp pl2bat.bat blib\script\cpanp C:\cpanrun\build\5-10-0\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib\lib', 'blib\arch')" t/*.t t/00_CPANPLUS-Inc.....................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 ok 1 - use CPANPLUS::inc; ok 2 - CPANPLUS::inc->can(...) 1..2 ok t/00_CPANPLUS-Internals-Utils.........# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 1..40 ok 1 - Created dir 'foo' ok 2 - 'foo' is a dir ok 3 - Chdir to 'foo' ok 4 - Cwd() is 'foo' ok 5 - Chdir back to 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t' ok 6 - Cwd() is 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t' ok 7 - Move from 'foo' to 'bar' ok 8 - Dir 'bar' exists ok 9 - Dir 'foo' no longer exists ok 10 - Impossible move detected ok 11 - Expected error found ok 12 - Dir 'bar' exists ok 13 - Deleted dir 'bar' ok 14 - Dir 'bar' no longer exists ok 15 - Got file contents ok 16 - Proper contents found ok 17 - Proper contents found ok 18 - Perl version found ok 19 - Looks like a proper version ok 20 - Version returned ok 21 - Value as expected ok 22 - Version returned ok 23 - Value as expected ok 24 - Version returned ok 25 - Value as expected ok 26 - Version returned ok 27 - Value as expected ok 28 - Version returned ok 29 - Value as expected ok 30 - _whoami returned a result ok 31 - Value as expected ok 32 - File 'zot' created ok 33 - File permissions set to 000 Undefined subroutine &File::stat::stat called at C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/../lib/CPANPLUS/Internals/Utils.pm line 321. # Looks like you planned 40 tests but only ran 33. # Looks like your test died just after 33. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 34-40 Failed 7/40 tests, 82.50% okay t/01_CPANPLUS-Configure...............# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 ok 1 - use CPANPLUS::Configure; ok 2 - The object isa CPANPLUS::Configure ok 3 - The object isa CPANPLUS::Config ok 4 - Base retrieved by old compat API ok 5 - Value as expected ok 6 - Possible options obtained ok 7 - Key 'test_key' not yet defined ok 8 - _add_build('test_key' => VAL) ok 9 - deep check for 'moddir' ok 10 - _set_build('moddir' => 1) ok 11 - _get_build('moddir') ok 12 - _set_build('moddir' => ORGVAL) ok 13 - deep check for 'startdir' ok 14 - _set_build('startdir' => 1) ok 15 - _get_build('startdir') ok 16 - _set_build('startdir' => ORGVAL) ok 17 - deep check for 'plugins' ok 18 - _set_build('plugins' => 1) ok 19 - _get_build('plugins') ok 20 - _set_build('plugins' => ORGVAL) ok 21 - deep check for 'distdir' ok 22 - _set_build('distdir' => 1) ok 23 - _get_build('distdir') ok 24 - _set_build('distdir' => ORGVAL) ok 25 - deep check for 'custom_sources' ok 26 - _set_build('custom_sources' => 1) ok 27 - _get_build('custom_sources') ok 28 - _set_build('custom_sources' => ORGVAL) ok 29 - deep check for 'autdir' ok 30 - _set_build('autdir' => 1) ok 31 - _get_build('autdir') ok 32 - _set_build('autdir' => ORGVAL) ok 33 - deep check for 'test_key' ok 34 - _set_build('test_key' => 1) ok 35 - _get_build('test_key') ok 36 - _set_build('test_key' => ORGVAL) ok 37 - deep check for 'sanity_check' ok 38 - _set_build('sanity_check' => 1) ok 39 - _get_build('sanity_check') ok 40 - _set_build('sanity_check' => ORGVAL) ok 41 - deep check for 'install_log_dir' ok 42 - _set_build('install_log_dir' => 1) ok 43 - _get_build('install_log_dir') ok 44 - _set_build('install_log_dir' => ORGVAL) ok 45 - deep check for 'autobundle' ok 46 - _set_build('autobundle' => 1) ok 47 - _get_build('autobundle') ok 48 - _set_build('autobundle' => ORGVAL) ok 49 - deep check for 'autobundle_prefix' ok 50 - _set_build('autobundle_prefix' => 1) ok 51 - _get_build('autobundle_prefix') ok 52 - _set_build('autobundle_prefix' => ORGVAL) ok 53 - All possible keys found ok 54 - Possible options obtained ok 55 - Key 'test_key' not yet defined ok 56 - _add_fetch('test_key' => VAL) ok 57 - deep check for 'blacklist' ok 58 - _set_fetch('blacklist' => 1) ok 59 - _get_fetch('blacklist') ok 60 - _set_fetch('blacklist' => ORGVAL) ok 61 - deep check for 'test_key' ok 62 - _set_fetch('test_key' => 1) ok 63 - _get_fetch('test_key') ok 64 - _set_fetch('test_key' => ORGVAL) ok 65 - All possible keys found ok 66 - Possible options obtained ok 67 - Key 'test_key' not yet defined ok 68 - _add_mirror('test_key' => VAL) ok 69 - deep check for 'base' ok 70 - _set_mirror('base' => 1) ok 71 - _get_mirror('base') ok 72 - _set_mirror('base' => ORGVAL) ok 73 - deep check for 'dslip' ok 74 - _set_mirror('dslip' => 1) ok 75 - _get_mirror('dslip') ok 76 - _set_mirror('dslip' => ORGVAL) ok 77 - deep check for 'test_key' ok 78 - _set_mirror('test_key' => 1) ok 79 - _get_mirror('test_key') ok 80 - _set_mirror('test_key' => ORGVAL) ok 81 - deep check for 'auth' ok 82 - _set_mirror('auth' => 1) ok 83 - _get_mirror('auth') ok 84 - _set_mirror('auth' => ORGVAL) ok 85 - deep check for 'mod' ok 86 - _set_mirror('mod' => 1) ok 87 - _get_mirror('mod') ok 88 - _set_mirror('mod' => ORGVAL) ok 89 - All possible keys found ok 90 - Possible options obtained ok 91 - Key 'test_key' not yet defined ok 92 - _add_source('test_key' => VAL) ok 93 - deep check for 'hosts' ok 94 - _set_source('hosts' => 1) ok 95 - _get_source('hosts') ok 96 - _set_source('hosts' => ORGVAL) ok 97 - deep check for 'dslip' ok 98 - _set_source('dslip' => 1) ok 99 - _get_source('dslip') ok 100 - _set_source('dslip' => ORGVAL) ok 101 - deep check for 'test_key' ok 102 - _set_source('test_key' => 1) ok 103 - _get_source('test_key') ok 104 - _set_source('test_key' => ORGVAL) ok 105 - deep check for 'custom_index' ok 106 - _set_source('custom_index' => 1) ok 107 - _get_source('custom_index') ok 108 - _set_source('custom_index' => ORGVAL) ok 109 - deep check for 'auth' ok 110 - _set_source('auth' => 1) ok 111 - _get_source('auth') ok 112 - _set_source('auth' => ORGVAL) ok 113 - deep check for 'stored' ok 114 - _set_source('stored' => 1) ok 115 - _get_source('stored') ok 116 - _set_source('stored' => ORGVAL) ok 117 - deep check for 'update' ok 118 - _set_source('update' => 1) ok 119 - _get_source('update') ok 120 - _set_source('update' => ORGVAL) ok 121 - deep check for 'mod' ok 122 - _set_source('mod' => 1) ok 123 - _get_source('mod') ok 124 - _set_source('mod' => ORGVAL) ok 125 - All possible keys found ok 126 - Possible options obtained ok 127 - Key 'test_key' not yet defined ok 128 - add_conf('test_key' => VAL) ok 129 - deep check for 'verbose' ok 130 - set_conf('verbose' => 1) ok 131 - get_conf('verbose') ok 132 - set_conf('verbose' => ORGVAL) ok 133 - deep check for 'hosts' ok 134 - set_conf('hosts' => 1) ok 135 - get_conf('hosts') ok 136 - set_conf('hosts' => ORGVAL) ok 137 - deep check for 'storable' ok 138 - set_conf('storable' => 1) ok 139 - get_conf('storable') ok 140 - set_conf('storable' => ORGVAL) ok 141 - deep check for 'skiptest' ok 142 - set_conf('skiptest' => 1) ok 143 - get_conf('skiptest') ok 144 - set_conf('skiptest' => ORGVAL) ok 145 - deep check for 'makeflags' ok 146 - set_conf('makeflags' => 1) ok 147 - get_conf('makeflags') ok 148 - set_conf('makeflags' => ORGVAL) ok 149 - deep check for 'test_key' ok 150 - set_conf('test_key' => 1) ok 151 - get_conf('test_key') ok 152 - set_conf('test_key' => ORGVAL) ok 153 - deep check for 'fetchdir' ok 154 - set_conf('fetchdir' => 1) ok 155 - get_conf('fetchdir') ok 156 - set_conf('fetchdir' => ORGVAL) ok 157 - deep check for 'email' ok 158 - set_conf('email' => 1) ok 159 - get_conf('email') ok 160 - set_conf('email' => ORGVAL) ok 161 - deep check for 'cpantest_mx' ok 162 - set_conf('cpantest_mx' => 1) ok 163 - get_conf('cpantest_mx') ok 164 - set_conf('cpantest_mx' => ORGVAL) ok 165 - deep check for 'dist_type' ok 166 - set_conf('dist_type' => 1) ok 167 - get_conf('dist_type') ok 168 - set_conf('dist_type' => ORGVAL) ok 169 - deep check for 'timeout' ok 170 - set_conf('timeout' => 1) ok 171 - get_conf('timeout') ok 172 - set_conf('timeout' => ORGVAL) ok 173 - deep check for 'prefer_makefile' ok 174 - set_conf('prefer_makefile' => 1) ok 175 - get_conf('prefer_makefile') ok 176 - set_conf('prefer_makefile' => ORGVAL) ok 177 - deep check for 'makemakerflags' ok 178 - set_conf('makemakerflags' => 1) ok 179 - get_conf('makemakerflags') ok 180 - set_conf('makemakerflags' => ORGVAL) ok 181 - deep check for 'lib' ok 182 - set_conf('lib' => 1) ok 183 - get_conf('lib') ok 184 - set_conf('lib' => ORGVAL) ok 185 - deep check for 'debug' ok 186 - set_conf('debug' => 1) ok 187 - get_conf('debug') ok 188 - set_conf('debug' => ORGVAL) ok 189 - deep check for 'shell' ok 190 - set_conf('shell' => 1) ok 191 - get_conf('shell') ok 192 - set_conf('shell' => ORGVAL) ok 193 - deep check for 'prefer_bin' ok 194 - set_conf('prefer_bin' => 1) ok 195 - get_conf('prefer_bin') ok 196 - set_conf('prefer_bin' => ORGVAL) ok 197 - deep check for 'write_install_logs' ok 198 - set_conf('write_install_logs' => 1) ok 199 - get_conf('write_install_logs') ok 200 - set_conf('write_install_logs' => ORGVAL) ok 201 - deep check for 'base' ok 202 - set_conf('base' => 1) ok 203 - get_conf('base') ok 204 - set_conf('base' => ORGVAL) ok 205 - deep check for 'extractdir' ok 206 - set_conf('extractdir' => 1) ok 207 - get_conf('extractdir') ok 208 - set_conf('extractdir' => ORGVAL) ok 209 - deep check for 'no_update' ok 210 - set_conf('no_update' => 1) ok 211 - get_conf('no_update') ok 212 - set_conf('no_update' => ORGVAL) ok 213 - deep check for 'buildflags' ok 214 - set_conf('buildflags' => 1) ok 215 - get_conf('buildflags') ok 216 - set_conf('buildflags' => ORGVAL) ok 217 - deep check for 'force' ok 218 - set_conf('force' => 1) ok 219 - get_conf('force') ok 220 - set_conf('force' => ORGVAL) ok 221 - deep check for 'prereqs' ok 222 - set_conf('prereqs' => 1) ok 223 - get_conf('prereqs') ok 224 - set_conf('prereqs' => ORGVAL) ok 225 - deep check for 'cpantest' ok 226 - set_conf('cpantest' => 1) ok 227 - get_conf('cpantest') ok 228 - set_conf('cpantest' => ORGVAL) ok 229 - deep check for 'signature' ok 230 - set_conf('signature' => 1) ok 231 - get_conf('signature') ok 232 - set_conf('signature' => ORGVAL) ok 233 - deep check for 'flush' ok 234 - set_conf('flush' => 1) ok 235 - get_conf('flush') ok 236 - set_conf('flush' => ORGVAL) ok 237 - deep check for 'allow_build_interactivity' ok 238 - set_conf('allow_build_interactivity' => 1) ok 239 - get_conf('allow_build_interactivity') ok 240 - set_conf('allow_build_interactivity' => ORGVAL) ok 241 - deep check for 'show_startup_tip' ok 242 - set_conf('show_startup_tip' => 1) ok 243 - get_conf('show_startup_tip') ok 244 - set_conf('show_startup_tip' => ORGVAL) ok 245 - deep check for 'passive' ok 246 - set_conf('passive' => 1) ok 247 - get_conf('passive') ok 248 - set_conf('passive' => ORGVAL) ok 249 - deep check for 'md5' ok 250 - set_conf('md5' => 1) ok 251 - get_conf('md5') ok 252 - set_conf('md5' => ORGVAL) ok 253 - All possible keys found ok 254 - Possible options obtained ok 255 - Key 'test_key' not yet defined ok 256 - add_program('test_key' => VAL) ok 257 - deep check for 'perlwrapper' ok 258 - set_program('perlwrapper' => 1) ok 259 - get_program('perlwrapper') ok 260 - set_program('perlwrapper' => ORGVAL) ok 261 - deep check for 'test_key' ok 262 - set_program('test_key' => 1) ok 263 - get_program('test_key') ok 264 - set_program('test_key' => ORGVAL) ok 265 - deep check for 'editor' ok 266 - set_program('editor' => 1) ok 267 - get_program('editor') ok 268 - set_program('editor' => ORGVAL) ok 269 - deep check for 'shell' ok 270 - set_program('shell' => 1) ok 271 - get_program('shell') ok 272 - set_program('shell' => ORGVAL) ok 273 - deep check for 'make' ok 274 - set_program('make' => 1) ok 275 - get_program('make') ok 276 - set_program('make' => ORGVAL) ok 277 - deep check for 'sudo' ok 278 - set_program('sudo' => 1) ok 279 - get_program('sudo') ok 280 - set_program('sudo' => ORGVAL) ok 281 - deep check for 'pager' ok 282 - set_program('pager' => 1) ok 283 - get_program('pager') ok 284 - set_program('pager' => ORGVAL) ok 285 - All possible keys found ok 286 - Config CPANPLUS::Config::Test2572 saved ok 287 - File exists ok 288 - File has size ok 289 - Reran ->init() ok 290 - Found C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\CPANPLUS\Config\Test2572.pm in %INC ok 291 - File exists ok 292 - File removed ok 293 - Reran init again ok 294 - Warning logged ok 295 - Bogus method call returns undef ok 296 - Bogus method call recognized 1..296 ok t/02_CPANPLUS-Internals...............# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 ok 1 - The object isa CPANPLUS::Internals ok 2 - Comparing ID's ok 3 - ID deleted ok 4 - The object isa CPANPLUS::Internals ok 5 - Deleted ID matches last object ok 6 - ID stored ok 7 - Stored proper ID ok 8 - Object retrieved from ID ok 9 - The object isa CPANPLUS::Internals ok 10 - Retrieved ID properly ok 11 - Returned objects ok 12 - Proper amount of objects found ok 13 - Proper ID found on object ok 14 - Found last registered ID ok 15 - ID matches last object ok 16 - Incremented ID ok 17 - ID matched last ID + 1 ok 18 - Host ok ok 19 - Host now marked as bad ok 20 - Host still bad ok 21 - Hosts flushed ok 22 - Host now ok again ok 23 - 'Benchmark' not loaded ok 24 - 'load' cache flushed ok 25 - 'Benchmark' loaded ok 26 - Default callback 'munge_dist_metafile' called ok 27 - Default handler warning recorded ok 28 - Registered callback 'munge_dist_metafile' ok ok 29 - Retrieved callback ok 30 - Callback is a sub ok 31 - Callback called ok ok 32 - Got expected return value ok 33 - Default callback 'edit_test_report' called ok 34 - Default handler warning recorded ok 35 - Registered callback 'edit_test_report' ok ok 36 - Retrieved callback ok 37 - Callback is a sub ok 38 - Callback called ok ok 39 - Got expected return value ok 40 - Default callback 'proceed_on_test_failure' called ok 41 - Default handler warning recorded ok 42 - Registered callback 'proceed_on_test_failure' ok ok 43 - Retrieved callback ok 44 - Callback is a sub ok 45 - Callback called ok ok 46 - Got expected return value ok 47 - Default callback 'filter_prereqs' called ok 48 - Default handler warning recorded ok 49 - Registered callback 'filter_prereqs' ok ok 50 - Retrieved callback ok 51 - Callback is a sub ok 52 - Callback called ok ok 53 - Got expected return value ok 54 - Default callback 'munge_test_report' called ok 55 - Default handler warning recorded ok 56 - Registered callback 'munge_test_report' ok ok 57 - Retrieved callback ok 58 - Callback is a sub ok 59 - Callback called ok ok 60 - Got expected return value ok 61 - Default callback 'send_test_report' called ok 62 - Default handler warning recorded ok 63 - Registered callback 'send_test_report' ok ok 64 - Retrieved callback ok 65 - Callback is a sub ok 66 - Callback called ok ok 67 - Got expected return value ok 68 - Default callback 'install_prerequisite' called ok 69 - Default handler warning recorded ok 70 - Registered callback 'install_prerequisite' ok ok 71 - Retrieved callback ok 72 - Callback is a sub ok 73 - Callback called ok ok 74 - Got expected return value 1..74 ok t/03_CPANPLUS-Internals-Source........# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\CPANPLUS' ok 1 - The object isa CPANPLUS::Internals ok 2 - C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz exists ok 3 - C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz exists ok 4 - C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz exists ok 5 - Authortree loaded successfully ok 6 - Moduletree loaded successfully ok 7 - The object isa CPANPLUS::Module::Author ok 8 - The object isa CPANPLUS::Module ok 9 - Found file for custom source ok 10 - File 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-CPAN\authors\id\EUNOXS\Foo-Bar-0.01.tar.gz' exists ok 11 - Sources should be written to 'file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/dummy-CPAN/authors/id/EUNOXS' ok 12 - Sources written to 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\custom-sources\file%3A%2F%2F%2FC%3A%2Fcpanrun%2Fdepot%2Fmain%2Fcontrib-patched%2Fperl%2FCPAN%2Fsrc%2FCPANPLUS%2Ft%2Fdummy-CPAN%2Fauthors%2Fid%2FEUNOXS' ok 13 - File exists ok 14 - CPANPLUS::Backend->can('__write_custom_module_index') ok 15 - Sources written ok 16 - Written to expected file ok 17 - Source file exists ok 18 - File has non-zero size ok 19 - CPANPLUS::Backend->can('__list_custom_module_sources') ok 20 - Got list of sources ok 21 - Found proper entry for C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\custom-sources\file%3A%2F%2F%2FC%3A%2Fcpanrun%2Fdepot%2Fmain%2Fcontrib-patched%2Fperl%2FCPAN%2Fsrc%2FCPANPLUS%2Ft%2Fdummy-CPAN%2Fauthors%2Fid%2FEUNOXS ok 22 - CPANPLUS::Backend->can('__create_custom_module_entries') ok 23 - Sources file loaded ok 24 - Found added module ok 25 - Full download path set ok 26 - Attributed to custom author ok 27 - Addition message recorded ok 28 - CPANPLUS::Backend->can('__update_custom_module_sources') ok 29 - Custom sources updated ok 30 - Timestamp on sourcefile updated ok 31 - CPANPLUS::Backend->can('__update_custom_module_source') ok 32 - Custom source for 'file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/dummy-CPAN/authors/id/EUNOXS' updated ok 33 - Timestamp on sourcefile updated ok 34 - All sources updated ok 35 - Timestamp on sourcefile updated ok 36 - Update recorded in the log ok 37 - CPANPLUS::Backend->can('_remove_custom_module_source') ok 38 - Index file removed ok 39 - File 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\custom-sources\file%3A%2F%2F%2FC%3A%2Fcpanrun%2Fdepot%2Fmain%2Fcontrib-patched%2Fperl%2FCPAN%2Fsrc%2FCPANPLUS%2Ft%2Fdummy-CPAN%2Fauthors%2Fid%2FEUNOXS' no longer on disk 1..39 ok t/04_CPANPLUS-Module..................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\custom-sources' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - Rebuilding trees ok 2 - The object isa CPANPLUS::Module::Author ok 3 - The object isa CPANPLUS::Module ok 4 - The object isa CPANPLUS::Module ok 5 - Author name: ExtUtils::MakeMaker No XS Code ok 6 - Author CPANID: EUNOXS ok 7 - Author email: cpanplus@example.com ok 8 - The object isa CPANPLUS::Backend ok 9 - Retrieved module accessors ok 10 - About to test all accessors ok 11 - Mod->mtime: ok 12 - Mod->version: 0.01 ok 13 - Mod->name: Foo::Bar::EU::NOXS ok 14 - Mod->author: CPANPLUS::Module::Author=HASH(0x2915d24) ok 15 - Mod->dslip: cdpO ok 16 - Mod->path: authors/id/EUNOXS ok 17 - Mod->description: CPANPLUS Test Package ok 18 - Mod->package: Foo-Bar-0.01.tar.gz ok 19 - Mod->comment: ok 20 - Mod->module: Foo::Bar::EU::NOXS ok 21 - The object isa CPANPLUS::Backend ok 22 - The object isa CPANPLUS::Module::Author ok 23 - Module eq Author ok 24 - Convenience functions ok 25 - Package name ok 26 - Package version ok 27 - Package extension ok 28 - Package not core ok 29 - Module not core ok 30 - Package not bundle ok 31 - Module cloned ok 32 - The object isa CPANPLUS::Module ok 33 - Clone->name matches Mod->name ok 34 - Clone->mtime matches Mod->mtime ok 35 - Clone->_id matches Mod->_id ok 36 - Clone->version matches Mod->version ok 37 - Clone->author matches Mod->author ok 38 - Clone->_status matches Mod->_status ok 39 - Clone->dslip matches Mod->dslip ok 40 - Clone->path matches Mod->path ok 41 - Clone->description matches Mod->description ok 42 - Clone->package matches Mod->package ok 43 - Clone->comment matches Mod->comment ok 44 - Clone->module matches Mod->module ok 45 - Status object empty on start ok 46 - Status object defined after query ok 47 - Object stored as expected ok 48 - The object isa Object::Accessor ok 49 - Cannot extract unfetched file ok 50 - Error properly logged ok 51 - Module fetched ok 52 - Module is a file ok 53 - Module has size Argument "1.38_01" isn't numeric in numeric ge (>=) at C:/cpanrun/build/5-10-0/lib/Archive/Extract.pm line 670. Undefined subroutine &File::stat::stat called at C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/../lib/CPANPLUS/Internals/Utils.pm line 321. 1..53 # Looks like your test died just after 53. dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/05_CPANPLUS-Internals-Fetch.........# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - The object isa CPANPLUS::Internals ok 2 - The object isa CPANPLUS::Module ok 3 - Failed host added ok 4 - Host registered as failed ok 5 - Fresh host unregistered ok 6 - File downloaded to 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors\id\EUNOXS\Foo-Bar-0.01.tar.gz' ok 7 - File exists ok 8 - File removed ok 9 - File downloaded to 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors\id\EUNOXS\Foo-Bar-0.01.tar.gz' ok 10 - File exists ok 11 - Error recorded appropriately ok 12 - Failed host logged properly ok 13 - Fake module created from t/05_CPANPLUS-Internals-Fetch.t ok 14 - Fetch from set ok ok 15 - file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/05_CPANPLUS-Internals-Fetch.t fetched ok ok 16 - C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors\id\UNKNOWN-ORIGIN\05_CPANPLUS-Internals-Fetch.t exists ok 17 - Saved to proper location ok 18 - Saved with proper name 1..18 ok t/06_CPANPLUS-Internals-Constants.....# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - Fake auth object created ok 2 - IS_AUTHOBJ recognizes it ok 3 - IS_FAKE_AUTHOBJ recognizes it ok 4 - Fake mod object created ok 5 - IS_MODOBJ recognizes it ok 6 - IS_FAKE_MODOJB recognizes it ok 7 - IS_CONFOBJ recognizes conf object ok 8 - FILE_EXISTS finds file ok 9 - FILE_READABLE finds file ok 10 - DIR_EXISTS finds dir ok 11 - MAKEFILE_PL returns proper result without args ok 12 - MAKEFILE_PL returns proper result with args ok 13 - BUILD_PL returns proper result without args ok 14 - BUILD_PL returns proper result with args ok 15 - BLIB returns proper result without args ok 16 - BLIB returns proper result with args ok 17 - MAKEFILE returns proper result without args ok 18 - MAKEFILE returns proper result with args 1..18 ok t/07_CPANPLUS-Internals-Extract.......# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 ok 1 - The object isa CPANPLUS::Module ok 2 - Module fetched Argument "1.38_01" isn't numeric in numeric ge (>=) at C:/cpanrun/build/5-10-0/lib/Archive/Extract.pm line 670. Undefined subroutine &File::stat::stat called at C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/../lib/CPANPLUS/Internals/Utils.pm line 321. # Looks like your test died just after 2. 1..2 dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/08_CPANPLUS-Backend.................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - The object isa CPANPLUS::Backend ok 2 - Module tree has entries ok 3 - Author tree has entries ok 4 - Module object found ok 5 - Module list found ok 6 - ISA module object ok 7 - Bogus module detected ok 8 - Author object found ok 9 - Author list found ok 10 - ISA author object ok 11 - Objects are identical ok 12 - Bogus author detected ok 13 - Configure object found ok 14 - Attempting to parse Foo::Bar::EU::NOXS ok 15 - Result returned ok 16 - parse_module success by 'Foo::Bar::EU::NOXS' ok 17 - Proper version found: 0.01 ok 18 - Found in package_version as well ok 19 - Proper package found: Foo-Bar ok 20 - No digits in package name ok 21 - Proper author found: EUNOXS ok 22 - Proper path found: authors/id/EUNOXS ok 23 - Attempting to parse CPANPLUS::Module=HASH(0x29348e4) ok 24 - Result returned ok 25 - parse_module success by 'CPANPLUS::Module=HASH(0x29348e4)' ok 26 - Proper version found: 0.01 ok 27 - Found in package_version as well ok 28 - Proper package found: Foo-Bar ok 29 - No digits in package name ok 30 - Proper author found: EUNOXS ok 31 - Proper path found: authors/id/EUNOXS ok 32 - Attempting to parse Foo-Bar-EU-NOXS ok 33 - Result returned ok 34 - parse_module success by 'Foo-Bar-EU-NOXS' ok 35 - Proper version found: 0.01 ok 36 - Found in package_version as well ok 37 - Proper package found: Foo-Bar ok 38 - No digits in package name ok 39 - Proper author found: EUNOXS ok 40 - Proper path found: authors/id/EUNOXS ok 41 - Attempting to parse Foo-Bar-EU-NOXS-0.01 ok 42 - Result returned ok 43 - parse_module success by 'Foo-Bar-EU-NOXS-0.01' ok 44 - Proper version found: 0.01 ok 45 - Found in package_version as well ok 46 - Proper package found: Foo-Bar ok 47 - No digits in package name ok 48 - Proper author found: EUNOXS ok 49 - Proper path found: authors/id/EUNOXS ok 50 - Attempting to parse EUNOXS/Foo-Bar-EU-NOXS ok 51 - Result returned ok 52 - parse_module success by 'EUNOXS/Foo-Bar-EU-NOXS' ok 53 - Proper version found: 0.01 ok 54 - Found in package_version as well ok 55 - Proper package found: Foo-Bar ok 56 - No digits in package name ok 57 - Proper author found: EUNOXS ok 58 - Proper path found: authors/id/EUNOXS ok 59 - Attempting to parse EUNOXS/Foo-Bar-EU-NOXS-0.01 ok 60 - Result returned ok 61 - parse_module success by 'EUNOXS/Foo-Bar-EU-NOXS-0.01' ok 62 - Proper version found: 0.01 ok 63 - Found in package_version as well ok 64 - Proper package found: Foo-Bar ok 65 - No digits in package name ok 66 - Proper author found: EUNOXS ok 67 - Proper path found: authors/id/EUNOXS ok 68 - Attempting to parse Foo-Bar-EU-NOXS-0.09 ok 69 - Result returned ok 70 - parse_module success by 'Foo-Bar-EU-NOXS-0.09' ok 71 - Proper version found: 0.09 ok 72 - Found in package_version as well ok 73 - Proper package found: Foo-Bar ok 74 - No digits in package name ok 75 - Proper author found: EUNOXS ok 76 - Proper path found: authors/id/EUNOXS ok 77 - Attempting to parse MBXS/Foo-Bar-EU-NOXS-0.01 ok 78 - Result returned ok 79 - parse_module success by 'MBXS/Foo-Bar-EU-NOXS-0.01' ok 80 - Proper version found: 0.01 ok 81 - Found in package_version as well ok 82 - Proper package found: Foo-Bar ok 83 - No digits in package name ok 84 - Proper author found: MBXS ok 85 - Proper path found: authors/id/M/MB/MBXS ok 86 - Attempting to parse EUNOXS/Foo-Bar-EU-NOXS-0.09 ok 87 - Result returned ok 88 - parse_module success by 'EUNOXS/Foo-Bar-EU-NOXS-0.09' ok 89 - Proper version found: 0.09 ok 90 - Found in package_version as well ok 91 - Proper package found: Foo-Bar ok 92 - No digits in package name ok 93 - Proper author found: EUNOXS ok 94 - Proper path found: authors/id/EUNOXS ok 95 - Attempting to parse EUNOXS/Foo-Bar-EU-NOXS-0.09.zip ok 96 - Result returned ok 97 - parse_module success by 'EUNOXS/Foo-Bar-EU-NOXS-0.09.zip' ok 98 - Proper version found: 0.09 ok 99 - Found in package_version as well ok 100 - Proper package found: Foo-Bar ok 101 - No digits in package name ok 102 - Proper author found: EUNOXS ok 103 - Proper path found: authors/id/EUNOXS ok 104 - Attempting to parse FROO/Flub-Flob-1.1.zip ok 105 - Result returned ok 106 - parse_module success by 'FROO/Flub-Flob-1.1.zip' ok 107 - Proper version found: 1.1 ok 108 - Found in package_version as well ok 109 - Proper package found: Flub-Flob ok 110 - No digits in package name ok 111 - Proper author found: FROO ok 112 - Proper path found: authors/id/F/FR/FROO ok 113 - Attempting to parse G/GO/GOYALI/SMS_API_3_01.tar.gz ok 114 - Result returned ok 115 - parse_module success by 'G/GO/GOYALI/SMS_API_3_01.tar.gz' ok 116 - Proper version found: 3_01 ok 117 - Found in package_version as well ok 118 - Proper package found: SMS_API ok 119 - No digits in package name ok 120 - Proper author found: GOYALI ok 121 - Proper path found: authors/id/G/GO/GOYALI ok 122 - Attempting to parse E/EY/EYCK/Net/Lite/Net-Lite-FTP-0.091 ok 123 - Result returned ok 124 - parse_module success by 'E/EY/EYCK/Net/Lite/Net-Lite-FTP-0.091' ok 125 - Proper version found: 0.091 ok 126 - Found in package_version as well ok 127 - Proper package found: Net-Lite-FTP ok 128 - No digits in package name ok 129 - Proper author found: EYCK ok 130 - Proper path found: authors/id/E/EY/EYCK/Net/Lite ok 131 - Attempting to parse EYCK/Net/Lite/Net-Lite-FTP-0.091 ok 132 - Result returned ok 133 - parse_module success by 'EYCK/Net/Lite/Net-Lite-FTP-0.091' ok 134 - Proper version found: 0.091 ok 135 - Found in package_version as well ok 136 - Proper package found: Net-Lite-FTP ok 137 - No digits in package name ok 138 - Proper author found: EYCK ok 139 - Proper path found: authors/id/E/EY/EYCK/Net/Lite ok 140 - Attempting to parse M/MA/MAXDB/DBD-MaxDB-7.5.00.24a ok 141 - Result returned ok 142 - parse_module success by 'M/MA/MAXDB/DBD-MaxDB-7.5.00.24a' ok 143 - Proper version found: 7.5.00.24a ok 144 - Found in package_version as well ok 145 - Proper package found: DBD-MaxDB ok 146 - No digits in package name ok 147 - Proper author found: MAXDB ok 148 - Proper path found: authors/id/M/MA/MAXDB ok 149 - Attempting to parse EUNOXS/perl5.005_03.tar.gz ok 150 - Result returned ok 151 - parse_module success by 'EUNOXS/perl5.005_03.tar.gz' ok 152 - Proper version found: 5.005_03 ok 153 - Found in package_version as well ok 154 - Proper package found: perl ok 155 - No digits in package name ok 156 - Proper author found: EUNOXS ok 157 - Proper path found: authors/id/E/EU/EUNOXS ok 158 - Attempting to parse FROO/Flub-Flob-v1.1.0.tbz ok 159 - Result returned ok 160 - parse_module success by 'FROO/Flub-Flob-v1.1.0.tbz' ok 161 - Proper version found: v1.1.0 ok 162 - Found in package_version as well ok 163 - Proper package found: Flub-Flob ok 164 - No digits in package name ok 165 - Proper author found: FROO ok 166 - Proper path found: authors/id/F/FR/FROO ok 167 - Attempting to parse FROO/Flub-Flob-1.1_2.tbz ok 168 - Result returned ok 169 - parse_module success by 'FROO/Flub-Flob-1.1_2.tbz' ok 170 - Proper version found: 1.1_2 ok 171 - Found in package_version as well ok 172 - Proper package found: Flub-Flob ok 173 - No digits in package name ok 174 - Proper author found: FROO ok 175 - Proper path found: authors/id/F/FR/FROO ok 176 - Attempting to parse LDS/CGI.pm-3.27.tar.gz ok 177 - Result returned ok 178 - parse_module success by 'LDS/CGI.pm-3.27.tar.gz' ok 179 - Proper version found: 3.27 ok 180 - Found in package_version as well ok 181 - Proper package found: CGI ok 182 - No digits in package name ok 183 - Proper author found: LDS ok 184 - Proper path found: authors/id/L/LD/LDS ok 185 - Attempting to parse FROO/Text-Tabs+Wrap-2006.1117.tar.gz ok 186 - Result returned ok 187 - parse_module success by 'FROO/Text-Tabs+Wrap-2006.1117.tar.gz' ok 188 - Proper version found: 2006.1117 ok 189 - Found in package_version as well ok 190 - Proper package found: Text-Tabs+Wrap ok 191 - No digits in package name ok 192 - Proper author found: FROO ok 193 - Proper path found: authors/id/F/FR/FROO ok 194 - Attempting to parse JETTERO/Crypt-PBC-0.7.20.0-0.4.9 ok 195 - Result returned ok 196 - parse_module success by 'JETTERO/Crypt-PBC-0.7.20.0-0.4.9' ok 197 - Proper version found: 0.7.20.0-0.4.9 ok 198 - Found in package_version as well ok 199 - Proper package found: Crypt-PBC ok 200 - No digits in package name ok 201 - Proper author found: JETTERO ok 202 - Proper path found: authors/id/J/JE/JETTERO ok 203 - Non-existant module detected ok 204 - Non-existant fake module detected ok 205 - Missing author part detected ok 206 - Unable to find module ok 207 - Non-existant module detected ok 208 - Non-existant fake module detected ok 209 - Unable to parse ref ok 210 - parse_module success by 'http://foo/bar.gz' ok 211 - Fetch from set ok ok 212 - parse_module success by 'http://a/b/c/d/e/f/g/h/i/j' ok 213 - Fetch from set ok ok 214 - parse_module success by 'flub://floo' ok 215 - Fetch from set ok ok 216 - Got an RV object ok 217 - Overall OK ok 218 - Overload OK ok 219 - Function stored OK ok 220 - Arguments stored OK ok 221 - RV as expected ok 222 - Rebuilding trees ok 223 - Rebuilding and refetching trees ok 224 - Source file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' updated ok 225 - Cache methods flushed ok ok 226 - Cache hosts flushed ok ok 227 - Cache modules flushed ok ok 228 - Cache lib flushed ok ok 229 - Cache all flushed ok ok 230 - Found list of installed modules ok 231 - Autobundle written ok 232 - File has size ok 233 - Local mirror created ok 234 - Module 'Foo::Bar::MB::NOXS' fetched ok 235 - Module 'Foo::Bar::MB::NOXS' has size ok 236 - Checksum fetched for 'Foo::Bar::MB::NOXS' ok 237 - Checksum for 'Foo::Bar::MB::NOXS' has size ok 238 - Module 'Bundle::Foo::Bar' fetched ok 239 - Module 'Bundle::Foo::Bar' has size ok 240 - Checksum fetched for 'Bundle::Foo::Bar' ok 241 - Checksum for 'Bundle::Foo::Bar' has size ok 242 - Module 'Foo::Bar::MB::XS' fetched ok 243 - Module 'Foo::Bar::MB::XS' has size ok 244 - Checksum fetched for 'Foo::Bar::MB::XS' ok 245 - Checksum for 'Foo::Bar::MB::XS' has size ok 246 - Module 'Foo::Bar::EU::NOXS::Sub' fetched ok 247 - Module 'Foo::Bar::EU::NOXS::Sub' has size ok 248 - Checksum fetched for 'Foo::Bar::EU::NOXS::Sub' ok 249 - Checksum for 'Foo::Bar::EU::NOXS::Sub' has size ok 250 - Module 'Foo::Bar' fetched ok 251 - Module 'Foo::Bar' has size ok 252 - Checksum fetched for 'Foo::Bar' ok 253 - Checksum for 'Foo::Bar' has size ok 254 - Module 'Foo::Bar::EU::XS' fetched ok 255 - Module 'Foo::Bar::EU::XS' has size ok 256 - Checksum fetched for 'Foo::Bar::EU::XS' ok 257 - Checksum for 'Foo::Bar::EU::XS' has size ok 258 - Module 'Foo::Bar::EU::NOXS' fetched ok 259 - Module 'Foo::Bar::EU::NOXS' has size ok 260 - Checksum fetched for 'Foo::Bar::EU::NOXS' ok 261 - Checksum for 'Foo::Bar::EU::NOXS' has size ok 262 - Module 'Cwd' fetched ok 263 - Module 'Cwd' has size ok 264 - Checksum fetched for 'Cwd' ok 265 - Checksum for 'Cwd' has size ok 266 - Env var 'PERL5_CPANPLUS_IS_RUNNING' set ok 267 - Set to current process id ok 268 - Env var 'PERL5_CPANPLUS_IS_VERSION' set ok 269 - Set to current process version 1..269 ok t/09_CPANPLUS-Internals-Search........# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' # Deleting file 'dummy-localmirror\01mailrc.txt.gz' # Deleting file 'dummy-localmirror\02packages.details.txt.gz' # Deleting file 'dummy-localmirror\03modlist.data.gz' # Deleting directory 'dummy-localmirror\authors' ok 1 - Module found by 'name' ok 2 - Module isa module object ok 3 - Module found by 'mtime' ok 4 - Module isa module object ok 5 - Module isa module object ok 6 - Module isa module object ok 7 - Module isa module object ok 8 - Module isa module object ok 9 - Module isa module object ok 10 - Module isa module object ok 11 - Module isa module object ok 12 - Module found by 'version' ok 13 - Module isa module object ok 14 - Module isa module object ok 15 - Module isa module object ok 16 - Module isa module object ok 17 - Module isa module object ok 18 - Module isa module object ok 19 - Module isa module object ok 20 - Module found by 'dslip' ok 21 - Module isa module object ok 22 - Module isa module object ok 23 - Module isa module object ok 24 - Module isa module object ok 25 - Module isa module object ok 26 - Module isa module object ok 27 - Module found by 'path' ok 28 - Module isa module object ok 29 - Module isa module object ok 30 - Module isa module object ok 31 - Module isa module object ok 32 - Module isa module object ok 33 - Module found by 'description' ok 34 - Module isa module object ok 35 - Module found by 'package' ok 36 - Module isa module object ok 37 - Module isa module object ok 38 - Module isa module object ok 39 - Module isa module object ok 40 - Module isa module object ok 41 - Module isa module object ok 42 - Module found by 'comment' ok 43 - Module isa module object ok 44 - Module isa module object ok 45 - Module isa module object ok 46 - Module isa module object ok 47 - Module isa module object ok 48 - Module isa module object ok 49 - Module isa module object ok 50 - Module isa module object ok 51 - Module found by 'module' ok 52 - Module isa module object ok 53 - Author found by 'email' ok 54 - Author isa author object ok 55 - Author isa author object ok 56 - Author isa author object ok 57 - Author isa author object ok 58 - Author found by '_id' ok 59 - Author isa author object ok 60 - Author isa author object ok 61 - Author isa author object ok 62 - Author isa author object ok 63 - Author found by 'cpanid' ok 64 - Author isa author object ok 65 - Author found by 'author' ok 66 - Author isa author object ok 67 - Valid search yields no results ok 68 - No warnings issued ok 69 - Broken search yields no results ok 70 - Got a warning for wrong arguments 1..70 ok t/10_CPANPLUS-Error...................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - CPANPLUS::Error->can('msg') ok 2 - main->can('msg') ok 3 - CPANPLUS::Error->can('cp_error') ok 4 - main->can('cp_error') ok 5 - CPANPLUS::Error->can('error') ok 6 - main->can('error') ok 7 - CPANPLUS::Error->can('cp_msg') ok 8 - main->can('cp_msg') ok 9 - Starting with empty stack ok 10 - Output redirect file exists ok 11 - Output file is empty ok 12 - Output file now has size ok 13 - Opened output file for reading ok 14 - Got the file contents ok 15 - Got the error stack as string ok 16 - Contents matches for 'msg' ok 17 - Contents matches for 'msg' ok 18 - String matches for 'msg' ok 19 - String matches for 'msg' ok 20 - Trace matches for 'msg' ok 21 - Trace matches for 'msg' ok 22 - Trace holds proper traceback ok 23 - Trace holds program name ok 24 - Trace holds line number information ok 25 - Contents matches for 'cp_error' ok 26 - Contents matches for 'cp_error' ok 27 - String matches for 'cp_error' ok 28 - String matches for 'cp_error' ok 29 - Trace matches for 'cp_error' ok 30 - Trace matches for 'cp_error' ok 31 - Trace holds proper traceback ok 32 - Trace holds program name ok 33 - Trace holds line number information ok 34 - Contents matches for 'error' ok 35 - Contents matches for 'error' ok 36 - String matches for 'error' ok 37 - String matches for 'error' ok 38 - Trace matches for 'error' ok 39 - Trace matches for 'error' ok 40 - Trace holds proper traceback ok 41 - Trace holds program name ok 42 - Trace holds line number information ok 43 - Contents matches for 'cp_msg' ok 44 - Contents matches for 'cp_msg' ok 45 - String matches for 'cp_msg' ok 46 - String matches for 'cp_msg' ok 47 - Trace matches for 'cp_msg' ok 48 - Trace matches for 'cp_msg' ok 49 - Trace holds proper traceback ok 50 - Trace holds program name ok 51 - Trace holds line number information ok 52 - All items on stack ok 53 - All items flushed ok 54 - No items on stack 1..54 ok t/15_CPANPLUS-Shell...................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 ok 1 - use CPANPLUS::Shell; ok 2 - Default shell loaded ok 3 - New object created ok 4 - Object isa CPANPLUS::Shell::Default ok 5 - CPANPLUS::Shell->can('dispatch_on_input') ok 6 - Testing 'v' ok 7 - Output received ok 8 - Output matches '(?-xism:CPANPLUS)' ok 9 - Testing '! $self->__print($$)' ok 10 - Output received ok 11 - Output matches '(?-xism:3012)' ok 12 - Testing '?' ok 13 - Output received ok 14 - Output matches '(?-xism:\[General\])' ok 15 - Testing 'h' ok 16 - Output received ok 17 - Output matches '(?-xism:\[General\])' ok 18 - Testing 's' ok 19 - Output received ok 20 - Output matches '(?-xism:Unknown type)' ok 21 - Testing 's conf' ok 22 - Output received ok 23 - Output matches '(?-xism:CPANPLUS::Shell::Default)' ok 24 - Testing 's program' ok 25 - Output received ok 26 - Output matches '(?-xism:sudo)' ok 27 - Testing 's mirrors' ok 28 - Output received ok 29 - Output matches '(?-xism:dummy-CPAN)' ok 30 - Testing 's selfupdate' ok 31 - Output received ok 32 - Output matches '(?-xism:selfupdate)' ok 33 - Testing 'b' ok 34 - Output received ok 35 - Output matches '(?-xism:autobundle)' ok 36 - Testing 'a EUNOXS' ok 37 - Output received ok 38 - Output matches '(?-xism:EUNOXS)' ok 39 - Testing 'm Foo::Bar::EU::NOXS' ok 40 - Output received ok 41 - Output matches '(?-xism:Foo::Bar::EU::NOXS)' ok 42 - Testing 'w' ok 43 - Output received ok 44 - Output matches '(?-xism:Foo::Bar::EU::NOXS)' ok 45 - Testing 'r 1' ok 46 - Output received ok 47 - Output matches '(?-xism:README)' ok 48 - Testing 'r Foo::Bar::EU::NOXS' ok 49 - Output received ok 50 - Output matches '(?-xism:README)' ok 51 - Testing 'f Foo::Bar::EU::NOXS' ok 52 - Output received ok 53 - Output matches '(?-xism:EUNOXS)' ok 54 - Testing 'd Foo::Bar::EU::NOXS' ok 55 - Output received ok 56 - Output matches '(?-xism:Foo::Bar::EU::NOXS)' ok 57 - Testing 'l Foo::Bar::EU::NOXS' ok 58 - Output received ok 59 - Output matches '(?-xism:Foo::Bar::EU::NOXS)' ok 60 - Testing '! die $$; p' ok 61 - Output received ok 62 - Output matches '(?-xism:3012)' ok 63 - Testing '/plugins' ok 64 - Output received ok 65 - Output matches '(?i-xsm:Available plugins:)' ok 66 - Testing '/? ?' ok 67 - Output received ok 68 - Output matches '(?i-xsm:usage)' ok 69 - Testing '/? cs' ok 70 - Output received ok 71 - Output matches '(?-xism:/cs)' ok 72 - Testing '/cs --add file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/dummy-CPAN' ok 73 - Output received ok 74 - Output matches '(?-xism:Added remote source)' ok 75 - Testing '/cs --list' ok 76 - Output received ok 77 - Output matches '(?i-xsm:file\:\/\/\/C\:\/cpanrun\/depot\/main\/contrib\-patched\/perl\/CPAN\/src\/CPANPLUS\/t\/dummy\-CPAN)' ok 78 - Testing '/cs --contents file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/dummy-CPAN' ok 79 - Output received ok 80 - Output matches '(?i-xsm:EUNOXS)' ok 81 - Testing '/cs --update' ok 82 - Output received ok 83 - Output matches '(?-xism:Updated remote sources)' ok 84 - Testing '/cs --update file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/dummy-CPAN' ok 85 - Output received ok 86 - Output matches '(?-xism:Updated remote sources)' ok 87 - Testing '/cs --write C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus' ok 88 - Output received ok 89 - Output matches '(?-xism:Wrote remote source index)' ok 90 - Testing '/cs --remove file:///C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/dummy-CPAN' ok 91 - Output received ok 92 - Output matches '(?-xism:Removed remote source)' 1..92 ok t/19_CPANPLUS-Dist....................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\custom-sources' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\packages.txt' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - use CPANPLUS::Dist; ok 2 - Rebuilding trees ok 3 - Got module object ok 4 - New dist object created ok 5 - The object isa CPANPLUS::Dist ok 6 - The object isa CPANPLUS::Dist::_Test ok 7 - Status object found ok 8 - The object isa Object::Accessor ok 9 - Prepare call ok 10 - Status registered OK ok 11 - Create call ok 12 - Status registered OK ok 13 - Install call ok 14 - Status registered OK ok 15 - Format availabillity turned off ok 16 - Dist created with sanity check off ok 17 - The object isa CPANPLUS::Dist::_Test ok 18 - Dist not created with sanity check on ok 19 - Error recorded as expected ok 20 - No dist created by failed init ok 21 - Error recorded as expected ok 22 - Rebuilding trees Argument "1.38_01" isn't numeric in numeric ge (>=) at C:/cpanrun/build/5-10-0/lib/Archive/Extract.pm line 670. Undefined subroutine &File::stat::stat called at C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/../lib/CPANPLUS/Internals/Utils.pm line 321. 1..22 # Looks like your test died just after 22. dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/20_CPANPLUS-Dist-MM.................# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - Rebuilding trees ok 2 - Loaded object for: Foo::Bar::EU::NOXS ok 3 - Loaded object for: Foo::Bar ok 4 - Format is available ok 5 - Making format unavailable ok 6 - Format failure logged ok 7 - Fetching module to C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors\id\EUNOXS\Foo-Bar-0.01.tar.gz 1..7 # Looks like your test died just after 7. dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/21_CPANPLUS-Dist-No-Build...........# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - Module object retrieved ok 2 ok 3 - Tarball 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors\id\MBNOXS\Foo-Bar-0.01.tar.gz' exists Argument "1.38_01" isn't numeric in numeric ge (>=) at C:/cpanrun/build/5-10-0/lib/Archive/Extract.pm line 670. Undefined subroutine &File::stat::stat called at C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/CPANPLUS/t/../lib/CPANPLUS/Internals/Utils.pm line 321. 1..3 # Looks like your test died just after 3. dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/30_CPANPLUS-Internals-Selfupdate....# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\5.10.0' # Deleting directory 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\authors' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - New backend object created ok 2 - CPANPLUS::Backend->can('selfupdate_object') ok 3 - Got configuration hash ok 4 - Selfupdate object retrieved ok 5 - The object isa CPANPLUS::Selfupdate ok 6 - Testing dependencies for 'CPANPLUS::Shell::Default' ok 7 - No dependencies for 'CPANPLUS::Shell::Default' -- bundled ok 8 - Testing dependencies for 'CPANPLUS::Shell::Classic' ok 9 - No dependencies for 'CPANPLUS::Shell::Classic' -- bundled ok 10 - Testing dependencies for 'CPANPLUS::Test::Shell' ok 11 - Got prereq hash ok 12 - Return value isa HASH ok 13 - With the proper entries ok 14 - Config updated succesfully ok 15 - Category list returned ok 16 - Features list returned ok 17 - Testing feature 'some_feature' ok 18 - Module list returned ok 19 - The object isa CPANPLUS::Module ok 20 - The object isa CPANPLUS::Selfupdate::Module ok 21 - CPANPLUS::Selfupdate::Module->can('is_installed_version_sufficient') ok 22 - Module uptodate ok 23 - Got result as hash ok 24 - The object isa HASH ok 25 - With the proper entries ok 26 - Got modules for 'core' from 'list_modules_to_update' ok 27 - Got module list ok 28 - With right amount of modules ok 29 - The object isa CPANPLUS::Selfupdate::Module ok 30 - With the right name (Cwd) ok 31 - CPANPLUS::Selfupdate->can('list_enabled_features') ok 32 - Retrieved enabled features ok 33 - Proper features found ok 34 - CPANPLUS::Selfupdate->can('list_core_dependencies') ok 35 - Retrieved modules ok 36 - 1 Found ok 37 - The object isa CPANPLUS::Selfupdate::Module ok 38 - Correct module found ok 39 - Got result as hash ok 40 - The object isa HASH ok 41 - With the proper entries ok 42 - CPANPLUS::Selfupdate->can('list_core_modules') ok 43 - Retrieved modules ok 44 - 1 Found ok 45 - The object isa CPANPLUS::Selfupdate::Module ok 46 - Correct module found ok 47 - Got result as hash ok 48 - The object isa HASH ok 49 - With the proper entries ok 50 - CPANPLUS::Selfupdate->can('selfupdate') ok 51 - Selfupdate successful 1..51 ok t/40_CPANPLUS-Internals-Report........# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1 # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\01mailrc.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\02packages.details.txt.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\03modlist.data.gz' # Deleting file 'C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\CPANPLUS\t\dummy-cpanplus\sourcefiles.2.18.stored' ok 1 - Setting option cpantest to 2804 ok 2 - Retrieved properly ok 3 - Option cpantest set back to original ok 4 - No warnings ok 5 - Setting option cpantest_mx to 2804 ok 6 - Retrieved properly ok 7 - Option cpantest_mx set back to original ok 8 - No warnings ok 9 - Got proper mail account ok 10 - Test is relevant ok 11 - Test is irrelevant ok 12 - OS supported ok 13 - OS not supported ok 14 - OS not supported ok 15 - OS not supported ok 16 - Perl version too low ok 17 - Perl version too low ok 18 - Perl version too low ok 19 - Perl version adequate ok 20 - Tests defined ok 21 - No tests defined ok 22 - No tests defined ok 23 - No tests defined ok 24 - Proper test fail stage found ok 25 - Proper test fail stage found ok 26 - List of missing prereqs found ok 27 - Proper prereq found ok 28 - 1 result for multiple mentions ok 29 - Proper prereq found ok 30 - Test header generated ok 31 - Proper content found ok 32 - Proper content found ok 33 - Proper content found ok 34 - Proper content found ok 35 - Test header generated ok 36 - Proper content found ok 37 - Proper content found ok 38 - Proper content found ok 39 - Proper content found ok 40 - Test output generated ok 41 - Proper content found ok 42 - Proper content found ok 43 - Proper content found ok 44 - Proper content found ok 45 - Test output generated ok 46 - Proper content found ok 47 - Proper content found ok 48 - Proper content found ok 49 - Proper content found ok 50 - Missing test string generated ok 51 - Proper content found ok 52 - Proper content found ok 53 - Message footer string generated ok 54 - Proper content found ok 55 - Proper content found ok 56 - Proper content found ok 57 - Proper content found ok 58 - Proper content found ok 59 - Missing external libraries found ok 60 - Proper content found ok 61 - Listed loaded prerequisites ok 62 - Proper content found ok 63 - Default 'munge_test_report' callback OK ok 64 # skip You have chosen not to enable test reporting ok 65 # skip You have chosen not to enable test reporting ok 66 # skip You have chosen not to enable test reporting ok 67 # skip You have chosen not to enable test reporting ok 68 # skip You have chosen not to enable test reporting ok 69 # skip You have chosen not to enable test reporting ok 70 # skip You have chosen not to enable test reporting ok 71 # skip You have chosen not to enable test reporting ok 72 # skip You have chosen not to enable test reporting ok 73 # skip You have chosen not to enable test reporting ok 74 # skip You have chosen not to enable test reporting ok 75 # skip You have chosen not to enable test reporting ok 76 # skip You have chosen not to enable test reporting ok 77 # skip You have chosen not to enable test reporting ok 78 # skip You have chosen not to enable test reporting ok 79 # skip You have chosen not to enable test reporting ok 80 # skip You have chosen not to enable test reporting ok 81 # skip You have chosen not to enable test reporting ok 82 # skip You have chosen not to enable test reporting ok 83 # skip You have chosen not to enable test reporting ok 84 # skip You have chosen not to enable test reporting ok 85 # skip You have chosen not to enable test reporting ok 86 # skip You have chosen not to enable test reporting ok 87 # skip You have chosen not to enable test reporting ok 88 # skip You have chosen not to enable test reporting ok 89 # skip You have chosen not to enable test reporting ok 90 # skip You have chosen not to enable test reporting ok 91 # skip You have chosen not to enable test reporting ok 92 # skip You have chosen not to enable test reporting ok 93 # skip You have chosen not to enable test reporting ok 94 # skip You have chosen not to enable test reporting ok 95 # skip You have chosen not to enable test reporting ok 96 # skip You have chosen not to enable test reporting ok 97 # skip You have chosen not to enable test reporting ok 98 # skip You have chosen not to enable test reporting ok 99 # skip You have chosen not to enable test reporting ok 100 # skip You have chosen not to enable test reporting ok 101 # skip You have chosen not to enable test reporting ok 102 # skip You have chosen not to enable test reporting ok 103 # skip You have chosen not to enable test reporting ok 104 # skip You have chosen not to enable test reporting ok 105 # skip You have chosen not to enable test reporting ok 106 # skip You have chosen not to enable test reporting ok 107 # skip You have chosen not to enable test reporting ok 108 # skip You have chosen not to enable test reporting ok 109 # skip You have chosen not to enable test reporting ok 110 # skip You have chosen not to enable test reporting ok 111 # skip You have chosen not to enable test reporting ok 112 # skip You have chosen not to enable test reporting ok 113 # skip You have chosen not to enable test reporting ok 114 # skip You have chosen not to enable test reporting ok 115 # skip You have chosen not to enable test reporting ok 116 # skip You have chosen not to enable test reporting ok 117 # skip You have chosen not to enable test reporting ok 118 # skip You have chosen not to enable test reporting ok 119 # skip You have chosen not to enable test reporting ok 120 # skip You have chosen not to enable test reporting ok 121 # skip You have chosen not to enable test reporting ok 122 # skip You have chosen not to enable test reporting ok 123 # skip You have chosen not to enable test reporting ok 124 # skip You have chosen not to enable test reporting ok 125 # skip You have chosen not to enable test reporting ok 126 # skip You have chosen not to enable test reporting 1..126 ok 63/126 skipped: various reasons Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00_CPANPLUS-Internals-Utils.t 255 65280 40 14 34-40 t/04_CPANPLUS-Module.t 255 65280 53 0 ?? t/07_CPANPLUS-Internals-Extract.t 255 65280 2 0 ?? t/19_CPANPLUS-Dist.t 255 65280 22 0 ?? t/20_CPANPLUS-Dist-MM.t 255 65280 7 0 ?? t/21_CPANPLUS-Dist-No-Build.t 255 65280 3 0 ?? 63 subtests skipped. Failed 6/18 test scripts. 7/1236 subtests failed. Files=18, Tests=1236, 51 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU) Failed 6/18 test programs. 7/1236 subtests failed. NMAKE : fatal error U1077: 'C:\cpanrun\build\5-10-0\bin\perl.exe' : return code '0xff' Stop.