Checking if your kit is complete...
Looks good
Writing Makefile for ConfigReader::Simple

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

cp lib/Simple.pm blib\lib\ConfigReader/Simple.pm

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

	C:\cpanrun\build\5-10-0\bin\perl.exe "-MTest::Manifest" "-e" "run_t_manifest(1, 'blib\lib', 'blib\arch',  )"
Level is 
# Test level is 
Test::Manifest::test_harness found [t\load.t t\pod.t t\pod_coverage.t t\get.t t\parse_string.t t\set.t t\remove.t t\exists.t t\clone.t t\save.t]
t\load............1..1
ok 1 - use ConfigReader::Simple;
ok
t\pod.............1..1
ok 1 - blib\lib\ConfigReader\Simple.pm
ok
t\pod_coverage....1..0 # Skip Test::Pod::Coverage required for testing POD
skipped
        all skipped: Test::Pod::Coverage required for testing POD
t\get.............1..34
ok 1 - The object isa ConfigReader::Simple
ok 2 - Test3 has right value
ok 3
ok 4 - Test2 has right value
ok 5
ok 6 - Zero has right value as string
ok 7 - Zero has right value as number
ok 8 - Undef has right value (empty)
ok 9 - Continuation line has right value
ok 10
ok 11 - Test has no value with get()
ok 12 - Test has no value with AUTOLOAD
ok 13 - Test5 has no value with get()
ok 14 - Test5 has no value with AUTOLOAD
ok 15 - The object isa ConfigReader::Simple
ok 16 - Test3 has right value with AUTOLOAD
ok 17 - Scope has right value with AUTOLOAD
ok 18 - Test2 has right value with AUTOLOAD
ok 19 - Test10 has right value with AUTOLOAD
ok 20 - Test3 has right value with get(), before global
ok 21 - Test2 has right value with get(), before global
ok 22 - Test10 has right value with get), before global
ok 23 - Scope has right value after global add
ok 24 - The object isa ConfigReader::Simple
ok 25 - Scope has right value with AUTOLOAD, missing file
ok 26
ok 27 - The object isa ConfigReader::Simple
ok 28 - TestA has right value (from string)
ok 29 - TestB has right value (from string)
ok 30 - TestC has right value (from string)
ok 31 - The object isa ConfigReader::Simple
ok 32 - TestA has right value (from string)
ok 33 - TestB has right value (from string)
ok 34 - TestC has right value (from string)
ok
t\parse_string....ok 1 - use ConfigReader::Simple;
ok 2
ok 3
ok 4
1..4
ok
t\set.............1..11
ok 1 - The object isa ConfigReader::Simple
ok 2 - Test1 has the right value with get
ok 3 - Test1 has the right value with autoload
ok 4 - Pagagena has the right value with get
ok 5 - Pagagena has the right value with autoload
ok 6 - Tamino has the right value with get
ok 7 - Tamino has the right value with autoload
ok 8 - Unset thing that exists [Test2]
ok 9 - Unset thing [Test2] still has value
ok 10 - Unset thing that does not exist [$directive]
ok 11 - Unset thing that did not exist [$directive] exists
ok
t\remove..........1..5
ok 1 - The object isa ConfigReader::Simple
ok 2 - Test3 has the right value
ok 3 - Test3 is removed
ok 4 - Test3 no longer exists
ok 5 - Tenor does not exist, but was removed
ok
t\exists..........1..17
ok 1 - The object isa ConfigReader::Simple
ok 2 - Directive [Test1] should exist, but I cannot tell it does
ok 3 - Directive [Test2] should exist, but I cannot tell it does
ok 4 - Directive [Test3] should exist, but I cannot tell it does
ok 5 - Directive [Test4] should exist, but I cannot tell it does
ok 6 - Directive [Test5] shouldn't exist, but I think it does
ok 7 - Directive [Test5] shouldn't exist, but I think it does
ok 8 - Directive [Test5] shouldn't exist, but I think it does
ok 9 - Directive [exists] shouldn't exist, but I think it does
ok 10 - Directive [exists] shouldn't exist, but I think it does
ok 11 - Directive [exists] shouldn't exist, but I think it does
ok 12 - Directive [blah] shouldn't exist, but I think it does
ok 13 - Directive [blah] shouldn't exist, but I think it does
ok 14 - Directive [blah] shouldn't exist, but I think it does
ok 15 - Directive [get] shouldn't exist, but I think it does
ok 16 - Directive [get] shouldn't exist, but I think it does
ok 17 - Directive [get] shouldn't exist, but I think it does
ok
t\clone...........1..14
ok 1 - The object isa ConfigReader::Simple
ok 2 - The object isa ConfigReader::Simple
ok 3 - Cloned object has right value after change
ok 4 - Original object has right value after clone change
ok 5 - Original object has right value after change
ok 6 - Clone object has right value after original change
ok 7 - Original object has 1 associated file
ok 8 - Clone object has 1 associated file
ok 9 - Original object returns right file
ok 10 - Clone object returns right file
ok 11 - Original object has 1 associated file
ok 12 - Clone object has 1 associated file
ok 13 - Original object returns right file
ok 14 - Clone object returns right file
ok
t\save............1..18
ok 1 - The object isa ConfigReader::Simple
ok 2 - No arguments emits warning
ok 3 - No arguments return undef
ok 4 - There is nothing in $@ for a warning
ok 5 - File does not exist
ok 6 - Single argument returns true value
ok 7 - File exists
ok 8 - Bad arguments return undef
ok 9 - Error string says the right thing
ok 10 - Bad arguments return undef
ok 11 - Error string says the right thing
ok 12 - Bad arguments return undef
ok 13 - Error string says the right thing
ok 14 - Bad arguments return undef
ok 15 - Error string says the right thing
ok 16 - Three arguments return undef
ok 17
ok 18 - Four arguments return true
ok
All tests successful, 1 test skipped.
Files=10, Tests=105,  2 wallclock secs ( 0.00 cusr +  0.00 csys =  0.00 CPU)

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

Installing C:\cpanrun\build\5-10-0\html\site\lib\ConfigReader\Simple.html
Installing C:\cpanrun\build\5-10-0\site\lib\ConfigReader\Simple.pm
Appending installation info to C:\cpanrun\build\5-10-0\lib/perllocal.pod