Checking if your kit is complete...
Warning: the following files are missing in your kit:
	Makefile
Please inform the author.
Writing Makefile for Test::TAP::Model

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

cp lib/Test/TAP/Model.pm blib\lib\Test\TAP\Model.pm
cp lib/Test/TAP/Model/File.pm blib\lib\Test\TAP\Model\File.pm
cp lib/Test/TAP/Model/Consolidated.pm blib\lib\Test\TAP\Model\Consolidated.pm
cp lib/Test/TAP/Model/Subtest.pm blib\lib\Test\TAP\Model\Subtest.pm
cp example.pl blib\lib\Test\TAP\example.pl
cp lib/Test/TAP/Model/File/Consolidated.pm blib\lib\Test\TAP\Model\File\Consolidated.pm

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

	C:\cpanrun\build\5-10-0\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/basic............1..35
ok 1 - use Test::TAP::Model;
ok 2 - The object isa Test::TAP::Model
ok 3 - The object isa Test::Harness::Straps
ok 4 - Test::TAP::Model->can('start_file')
ok 5 - The object isa HASH
ok 6 - keys of structure
ok 7 - one test file
ok 8 - keys of file hash
ok 9 - three events
ok 10 - first event is a test
ok 11 - it passed
ok 12 - no diagnosis
ok 13 - second event is a test
ok 14 - it failed
ok 15 - it has diagnosis
ok 16 - third event is a test
ok 17 - it's a todo test
ok 18 - it has diagnosis
ok 19 - one test file
ok 20 - first subtest has no diag
ok 21 - second subtest does have diag
ok 22 - file wide results also exist
ok 23 - total of three tests
ok 24 - two tests ok
ok 25 - file did not pass
ok 26 - Test::TAP::Model dies when calling get_tests()
ok 27 - Test::TAP::Model dies when calling run()
ok 28 - The object isa Test::TAP::Model
ok 29 - The object isa Test::Harness::Straps
ok 30 - The object isa Test::TAP::Model
ok 31 - The object isa Test::Harness::Straps
ok 32 - The object isa Test::TAP::Model
ok 33 - The object isa Test::Harness::Straps
ok 34 - The object isa HASH
ok 35 - Test latest_event with parameters
ok
t/comprehensive....1..122
ok 1 - use Test::TAP::Model;
ok 2 - suite OK
ok 3 - one file
ok 4 - The object isa Test::TAP::Model::File
ok 5 - file is ok
ok 6 - file did not bail out
ok 7 - no pre diag
ok 8 - two subtests
ok 9 - 1 ok
ok 10 - 1 skip
ok 11 - reason
ok 12 - 2 ok
ok 13 - 2 not skip
ok 14 - one file
ok 15 - The object isa Test::TAP::Model::File
ok 16 - missing subtests after bailout are stubbed
ok 17 - whole run is not ok
ok 18 - file is not ok
ok 19 - file bailed out
ok 20 - first case is ok
ok 21 - but not second
ok 22 - 1 test, actually
ok 23 - no stubs
ok 24 - one file
ok 25 - The object isa Test::TAP::Model::File
ok 26 - actual cases
ok 27 - number planned
ok 28 - file as a whole is not ok
ok 29 - The object isa Test::TAP::Model::Subtest
ok 30 - 1 ok
ok 31 - not todo
ok 32 - actual ok
ok 33 - normal
ok 34 - 2 nok -> nok
ok 35 - not todo
ok 36 - actual nok
ok 37 - not normal
ok 38 - 3 nok todo -> ok
ok 39 - todo
ok 40 - actual nok
ok 41 - normal
ok 42 - 4 ok todo -> ok
ok 43 - todo
ok 44 - actual ok
ok 45 - not normal
ok 46 - one file
ok 47 - The object isa Test::TAP::Model::File
ok 48 - whole file was skipped
ok 49 - no test cases
ok 50 - ratio for file is 1
ok 51 - for suite too
ok 52 - two test files
ok 53 - suite as a whole is not ok
ok 54 - first file not ok
ok 55 - second file ok
ok 56 - first file ratio
ok 57 - second file ratio
ok 58 - total ratio
ok 59 - ratio alias also works
ok 60 - percentage of file
ok 61 - percentage is well formatted
ok 62 - file 0 ok in list context
ok 63 - file 0 ok in scalar context
ok 64 - file 1 ok in list context
ok 65 - file 1 ok in scalar context
ok 66 - total ok
ok 67 - file 0 seen in list context
ok 68 - file 0 seen in scalar context
ok 69 - file 1 seen in list context
ok 70 - file 1 seen in scalar context
ok 71 - total seen
ok 72 - file 0 nok in list context
ok 73 - file 0 nok in scalar context
ok 74 - file 1 nok in list context
ok 75 - file 1 nok in scalar context
ok 76 - total nok
ok 77 - file 0 unexpectedly_succeeded in list context
ok 78 - file 0 unexpectedly_succeeded in scalar context
ok 79 - file 1 unexpectedly_succeeded in list context
ok 80 - file 1 unexpectedly_succeeded in scalar context
ok 81 - total unexpectedly_succeeded
ok 82 - file 0 skipped in list context
ok 83 - file 0 skipped in scalar context
ok 84 - file 1 skipped in list context
ok 85 - file 1 skipped in scalar context
ok 86 - total skipped
ok 87 - file 0 todo in list context
ok 88 - file 0 todo in scalar context
ok 89 - file 1 todo in list context
ok 90 - file 1 todo in scalar context
ok 91 - total todo
ok 92 - suite isn't ok yet
ok 93 - no tests planned
ok 94 - but 3 tests seen
ok 95 - suite ok
ok 96 - plan at end registered
ok 97 - but 3 tests seen
ok 98 - str contains 1/0
ok 99 - suite not ok
ok 100 - two planned
ok 101 - actually seen 3
ok 102 - seen 3
ok 103 - case 1 was planned
ok 104 - case 3 was unplanned
ok 105 - suite not ok
ok 106 - no cases in file
ok 107 - it bailed out
ok 108 - file ratio is 0
ok 109 - suite ratio is 0
ok 110 - suite is OK
ok 111 - diagnosis before tests
ok 112 - one case
ok 113 - diagnosis belonging to case 1
ok 114 - suite is not OK
ok 115 - ratio is 0
ok 116 - zero percent
ok 117 - one file
ok 118 - file is not OK
ok 119 - no cases
ok 120 - no plan either
ok 121 - ratio is 0
ok 122 - zero percent
ok
t/consolidate......1..22
ok 1 - use Test::TAP::Model::Consolidated;
ok 2 - The object isa Test::TAP::Model::Consolidated
ok 3 - both tests are OK
ok 4 - one test file within
ok 5 - 4 passing subtests
ok 6 - 4 subtests altogether
ok 7 - ok/nok ratio is 1:1
ok 8 - composite file is consistent
ok 9 - both tests not OK together
ok 10 - 3 passing subtests
ok 11 - 4 subtests altogether
ok 12 - ok/nok ratio is 3:4
ok 13 - composite file is not consistent
ok 14 - composite file has 2 subfiles
ok 15 - two cases in first
ok 16 - 50% success in first
ok 17 - two cases in second
ok 18 - 100% success in first
ok 19 - first subcase of first is OK
ok 20 - second subcase of first is not OK
ok 21 - first subcase of second is OK
ok 22 - second subcase of second is OK
ok
t/oop_file.........1..16
ok 1 - use Test::TAP::Model::File;
ok 2 - The object isa Test::TAP::Model::File
ok 3 - failed
ok 4 - passed
ok 5 - alias
ok 6 - negation
ok 7 - not all skipped
ok 8 - all skipped
ok 9 - 3 planned
ok 10 - but two seen
ok 11 - 10 of these passed
ok 12 - 2 failed
ok 13 - none are todo
ok 14 - none are todo
ok 15 - two todo
ok 16 - 13 skipped
ok
t/oop_subtest......1..21
ok 1 - use Test::TAP::Model::Subtest;
ok 2 - The object isa Test::TAP::Model::Subtest
ok 3 - ok
ok 4 - actual_ok
ok 5 - failed
ok 6 - skipped
ok 7 - todo
ok 8 - number
ok 9 - line
ok 10 - line
ok 11 - reason
ok 12 - pos
ok 13 - pos hack file
ok 14 - pos hack line
ok 15 - pos hack col
ok 16 - ok
ok 17 - actual_ok
ok 18 - failed
ok 19 - skipped
ok 20 - todo
ok 21 - stringification
ok
t/pos_guessing.....1..12
ok 1 - use Test::TAP::Model;
ok 2 - The object isa Test::TAP::Model
ok 3 - suite passed
ok 4 - file of 1
ok 5 - line of 1
ok 6 - col of 1
not ok 7 - file of 2 # TODO use Regexp::Common quoted parsing

#   Failed (TODO) test 'file of 2'
#   at t/pos_guessing.t line 32.
#          got: '"gorch'
#     expected: 'gorch.t'
ok 8 - line of 2
ok 9 - no clumn
ok 10 - file of 3
ok 11 - line of 1
ok 12 - col of 1
ok
t/serializable.....1..6
ok 1 - use Test::TAP::Model;
ok 2 - The object isa Test::TAP::Model
ok 3 - Test::TAP::Model->can('structure')
ok 4 - The object isa Test::TAP::Model
ok 5 - structures are the same
ok 6 - test file count is too
ok
All tests successful.
Files=7, Tests=234,  1 wallclock secs ( 0.00 cusr +  0.00 csys =  0.00 CPU)

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

Installing C:\cpanrun\build\5-10-0\html\site\lib\Test\TAP\example.html
Installing C:\cpanrun\build\5-10-0\html\site\lib\Test\TAP\Model.html
Installing C:\cpanrun\build\5-10-0\html\site\lib\Test\TAP\Model\Consolidated.html
Installing C:\cpanrun\build\5-10-0\html\site\lib\Test\TAP\Model\File.html
Installing C:\cpanrun\build\5-10-0\html\site\lib\Test\TAP\Model\Subtest.html
Installing C:\cpanrun\build\5-10-0\html\site\lib\Test\TAP\Model\File\Consolidated.html
Installing C:\cpanrun\build\5-10-0\site\lib\Test\TAP\example.pl
Installing C:\cpanrun\build\5-10-0\site\lib\Test\TAP\Model.pm
Installing C:\cpanrun\build\5-10-0\site\lib\Test\TAP\Model\Consolidated.pm
Installing C:\cpanrun\build\5-10-0\site\lib\Test\TAP\Model\File.pm
Installing C:\cpanrun\build\5-10-0\site\lib\Test\TAP\Model\Subtest.pm
Installing C:\cpanrun\build\5-10-0\site\lib\Test\TAP\Model\File\Consolidated.pm
Appending installation info to C:\cpanrun\build\5-10-0\lib/perllocal.pod