Can't load ExtUtils::MakeMaker::Coverage, not adding testcover target
Checking if your kit is complete...
Looks good
Writing Makefile for Tie::Cycle::Sinewave

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

cp Sinewave.pm blib\lib\Tie\Cycle\Sinewave.pm

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

	C:\cpanrun\build\5-10-0\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/00-load......1..1
ok 1 - use Tie::Cycle::Sinewave;
# testing Tie::Cycle::Sinewave 0.05
ok
t/01-basic.....1..31
ok 1 - we have a T::C::S object
ok 2 - max start 50
ok 3 - min is -50
ok 4 - min is -50, set to -20
ok 5 - min is -20
ok 6 - max is  50
ok 7 - max is 50, set to 100
ok 8 - max is  100
ok 9 - period is 16
ok 10 - period is 16, set to 20
ok 11 - period is 20
ok 12 - swap min is -50
ok 13 - swap max is  50
ok 14 - max is 50, set to -100
ok 15 - now swap min is -100
ok 16 - now swap max is  -50
ok 17 - min start -100
ok 18 - not yet past max
ok 19 - but past min
ok 20 - now past max
ok 21 - not yet past min
ok 22 - but past max
ok 23 - now past min
ok 24 - back to where we started
ok 25 - angle check
ok 26 - at_min not defined for garbage
ok 27 - at_max not defined for garbage
ok 28 - STORE check
ok 29 - zero-length period changed to 1
ok 30 - period is 1, set to 0
ok 31 - zero-length period changed to 1 again
ok
t/99-author....1..0 # Skip PERL_AUTHOR_TESTING environment variable not set (or zero)
skipped
        all skipped: PERL_AUTHOR_TESTING environment variable not set (or zero)
All tests successful, 1 test skipped.
Files=3, Tests=32,  0 wallclock secs ( 0.00 cusr +  0.00 csys =  0.00 CPU)

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

Installing C:\cpanrun\build\5-10-0\html\site\lib\Tie\Cycle\Sinewave.html
Installing C:\cpanrun\build\5-10-0\site\lib\Tie\Cycle\Sinewave.pm
Appending installation info to C:\cpanrun\build\5-10-0\lib/perllocal.pod