Cannot determine perl version info from lib/ExtUtils/Autoconf.pm
*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- Test::Exception ...loaded. (0.21)
- Cwd             ...loaded. (2.04)
- Carp            ...loaded. (0)
- Config          ...loaded. (0)
- File::Spec      ...loaded. (0.82)
- File::Path      ...loaded. (1.0404)
- Test::More      ...loaded. (0.72)
- File::Which     ...loaded. (0.05)
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Writing Makefile for ExtUtils::Autoconf
/bin/sh -c true
/bin/sh -c true
cp lib/ExtUtils/Autoconf.pm blib/lib/ExtUtils/Autoconf.pm
Manifying blib/man3/ExtUtils::Autoconf.3
/bin/sh -c true
/bin/sh -c true
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iinc -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi  -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/00-load.t t/accessors.t t/basic.t t/class.t t/compat.t t/kwalitee.t t/notabs.t t/pod-coverage.t t/pod.t
t/00-load.........1..1
# Testing ExtUtils::Autoconf 0.02, Perl 5.006001, /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl
ok 1 - use ExtUtils::Autoconf;
ok
t/accessors.......1..8
ok 1 - The object isa ExtUtils::Autoconf
ok 2 - wd default
ok 3 - set/get wd
ok 4 - get/set autoconf
ok 5 - get/set autoheader
ok 6 - get full env
ok 7 - get single env value
ok 8 - env dies with more than two arguments
ok
t/basic...........1..50
ok 1 - The object isa ExtUtils::Autoconf
/bin/sh: autoheader:  not found.

#   Failed test 'autogen'
#   at t/basic.t line 18.
not ok 2 - autogen
# died: autogen failed. check the error messages above. at inc/Test/Exception.pm line 166

#   Failed test 'config.h.in exists'
#   at t/basic.t line 20.
not ok 3 - config.h.in exists

#   Failed test 'configure exists'
#   at t/basic.t line 21.
not ok 4 - configure exists
/bin/sh: autoheader:  not found.

#   Failed test 'configure'
#   at t/basic.t line 25.
# died: autogen failed. check the error messages above. at inc/Test/Exception.pm line 166

not ok 5 - configure
not ok 6 - config.h exists
#   Failed test 'config.h exists'
#   at t/basic.t line 27.

#   Failed test 'opened config.h'
#   at t/basic.t line 31.
readline() on closed filehandle Symbol::GEN0 at t/basic.t line 32.
not ok 7 - opened config.h
Use of uninitialized value in pattern match (m//) at t/basic.t line 32.

#   Failed test 'config.h has PERL_OSNAME set correctly'
#   at t/basic.t line 32.
#                   undef
#     doesn't match '(?-xism:#define PERL_OSNAME "hpux")'
not ok 8 - config.h has PERL_OSNAME set correctly
ok 9 - clean

#   Failed test 'configure still exists'
#   at t/basic.t line 44.
ok 10 - configure.ac still exists
not ok 11 - configure still exists

#   Failed test 'config.h.in still exists'
#   at t/basic.t line 45.
not ok 12 - config.h.in still exists

#   Failed test 'autom4te.cache still exists'
#   at t/basic.t line 46.
not ok 13 - autom4te.cache still exists
ok 14 - config.h deleted
ok 15 - config.log deleted
ok 16 - config.status deleted
ok 17 - realclean
ok 18 - configure.ac still exists
ok 19 - configure deleted
ok 20 - config.h.in deleted
ok 21 - autom4te.cache deleted
ok 22 - new doesn't croak on a non-HASH reference
ok 23 - The object isa ExtUtils::Autoconf
ok 24 - The object isa ExtUtils::Autoconf
ok 25 - setting hash attribute via new() works
ok 26 - setting scalar attribute via new() works
ok 27 - new does not croak on unknown attributes
ok 28 - The object isa ExtUtils::Autoconf
ok 29 - new does not croak on invalid value for existing attribute
ok 30 - The object isa ExtUtils::Autoconf
ok 31 - The object isa ExtUtils::Autoconf
ok 32 - autoheader attribute defaults to 'autoheader' if nothing was found in PATH
ok 33 - autoconf attribute defaults to 'autoconf' if nothing was found in PATH
ok 34 - The object isa ExtUtils::Autoconf
/bin/sh: autoheader:  not found.

#   Failed test 'configure succeeds even if autogen() didn't run before'
#   at t/basic.t line 127.
# died: autogen failed. check the error messages above. at inc/Test/Exception.pm line 166

#   Failed test 'config.h.in exists'
not ok 35 - configure succeeds even if autogen() didn't run before
not ok 36 - config.h.in exists
#   at t/basic.t line 129.

#   Failed test 'configure exists'
#   at t/basic.t line 130.
not ok 37 - configure exists

#   Failed test 'config.h exists'
#   at t/basic.t line 131.
not ok 38 - config.h exists
ok 39 - realclean
ok 40 - The object isa ExtUtils::Autoconf
/bin/sh: autoheader:  not found.
ok 41 - dies with invalid configure.ac
ok 42 - realclean
ok 43 - The object isa ExtUtils::Autoconf
/bin/sh: autoheader:  not found.
ok 44 - dies with invalid configure.ac
ok 45 - realclean
ok 46 - The object isa ExtUtils::Autoconf
/bin/sh: autoheader:  not found.
ok 47 - dies with invalid configure.ac
ok 48 - realclean
ok 49 - The object isa ExtUtils::Autoconf
ok 50 - dies with non-existent path
# Looks like you failed 14 tests of 50.
dubious
	Test returned status 14 (wstat 3584, 0xe00)
DIED. FAILED tests 2-8, 11-13, 35-38
	Failed 14/50 tests, 72.00% okay
t/class...........1..21
/bin/sh: autoheader:  not found.

#   Failed test 'run_autogen'
#   at t/class.t line 16.
# died: autogen failed. check the error messages above. at inc/Test/Exception.pm line 166
not ok 1 - run_autogen

#   Failed test 'config.h.in exists'
#   at t/class.t line 18.

#   Failed test 'configure exists'
#   at t/class.t line 19.
not ok 2 - config.h.in exists
not ok 3 - configure exists
/bin/sh: autoheader:  not found.

#   Failed test 'configure'
#   at t/class.t line 23.
# died: autogen failed. check the error messages above. at inc/Test/Exception.pm line 166
not ok 4 - configure

#   Failed test 'config.h exists'
#   at t/class.t line 25.

#   Failed test 'opened config.h'
#   at t/class.t line 29.
not ok 5 - config.h exists
not ok 6 - opened config.h
readline() on closed filehandle Symbol::GEN0 at t/class.t line 30.
Use of uninitialized value in pattern match (m//) at t/class.t line 30.

#   Failed test 'config.h has PERL_OSNAME set correctly'
not ok 7 - config.h has PERL_OSNAME set correctly
#   at t/class.t line 30.
#                   undef
#     doesn't match '(?-xism:#define PERL_OSNAME "hpux")'
ok 8 - clean
ok 9 - configure.ac still exists

#   Failed test 'configure still exists'
#   at t/class.t line 42.
not ok 10 - configure still exists

#   Failed test 'config.h.in still exists'
#   at t/class.t line 43.

#   Failed test 'autom4te.cache still exists'
#   at t/class.t line 44.
not ok 11 - config.h.in still exists
not ok 12 - autom4te.cache still exists
ok 13 - config.h deleted
ok 14 - config.log deleted
ok 15 - config.status deleted
ok 16 - realclean
ok 17 - configure.ac still exists
ok 18 - configure deleted
ok 19 - config.h.in deleted
ok 20 - autom4te.cache deleted
# Looks like you failed 10 tests of 21.
ok 21 - configure fails with invalid wd
dubious
	Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-7, 10-12
	Failed 10/21 tests, 52.38% okay
t/compat..........1..2
ok 1 - ExtUtils::Autoconf->can('reconf')
ok 2 - reconf does the same than autogen
ok
t/kwalitee........1..0 # Skip Needs Test::Kwalitee
skipped
        all skipped: Needs Test::Kwalitee
t/notabs..........1..0 # Skip Needs Test::NoTabs
skipped
        all skipped: Needs Test::NoTabs
t/pod-coverage....1..0 # Skip Test::Pod::Coverage 1.04 required for testing POD coverage
skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............1..0 # Skip Test::Pod 1.14 required for testing POD
skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed 2/9 test scripts, 77.78% okay. 24/82 subtests failed, 70.73% okay.
Failed Test Stat Wstat Total Fail  Failed  List of Failed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
t/basic.t     14  3584    50   14  28.00%  2-8 11-13 35-38
t/class.t     10  2560    21   10  47.62%  1-7 10-12
4 tests skipped.
make: *** [test_dynamic] Error 11