Checking if your kit is complete... Looks good Writing Makefile for Geo::PostalCode cp lib/Geo/PostalCode/InstallDB.pm blib/lib/Geo/PostalCode/InstallDB.pm cp lib/Geo/PostalCode.pm blib/lib/Geo/PostalCode.pm Manifying blib/man3/Geo::PostalCode::InstallDB.3 Manifying blib/man3/Geo::PostalCode.3 PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t t/00_compile......1..2 # Failed test 'use Geo::PostalCode;' # at t/00_compile.t line 10. # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: blib/arch blib/lib /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl .) at blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at t/00_compile.t line 10. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. not ok 1 - use Geo::PostalCode; # Failed test 'use Geo::PostalCode::InstallDB;' # at t/00_compile.t line 11. # Tried to use 'Geo::PostalCode::InstallDB'. # Error: Can't locate DB_File.pm in @INC (@INC contains: blib/arch blib/lib /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl .) at blib/lib/Geo/PostalCode/InstallDB.pm line 37. # BEGIN failed--compilation aborted at t/00_compile.t line 11. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. not ok 2 - use Geo::PostalCode::InstallDB; # Looks like you failed 2 tests of 2. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/01_installdb....1..2 Can't locate DB_File.pm in @INC (@INC contains: blib/arch blib/lib /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl .) at blib/lib/Geo/PostalCode.pm line 5. BEGIN failed--compilation aborted at blib/lib/Geo/PostalCode.pm line 5. Compilation failed in require at blib/lib/Geo/PostalCode/InstallDB.pm line 36. BEGIN failed--compilation aborted at blib/lib/Geo/PostalCode/InstallDB.pm line 36. Compilation failed in require at t/01_installdb.t line 8. BEGIN failed--compilation aborted at t/01_installdb.t line 8. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/02_basic........1..16 # Failed test 'use Geo::PostalCode;' # at t/02_basic.t line 14. # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: blib/arch blib/lib /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl .) at blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at t/02_basic.t line 14. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. not ok 1 - use Geo::PostalCode; Can't locate object method "new" via package "Geo::PostalCode" (perhaps you forgot to load "Geo::PostalCode"?) at t/02_basic.t line 21. # Looks like you planned 16 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-16 Failed 16/16 tests, 0.00% okay t/03_polevault....1..20 # Failed test 'use Geo::PostalCode;' # at t/03_polevault.t line 11. # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: blib/arch blib/lib /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl .) at blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at t/03_polevault.t line 11. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. not ok 1 - use Geo::PostalCode; Can't locate object method "new" via package "Geo::PostalCode" (perhaps you forgot to load "Geo::PostalCode"?) at t/03_polevault.t line 29. # Looks like you planned 20 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-20 Failed 20/20 tests, 0.00% okay t/04_km...........1..9 # Failed test 'use Geo::PostalCode;' # at t/04_km.t line 8. not ok 1 - use Geo::PostalCode; # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: blib/arch blib/lib /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1 /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl .) at blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at t/04_km.t line 8. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Can't locate object method "new" via package "Geo::PostalCode" (perhaps you forgot to load "Geo::PostalCode"?) at t/04_km.t line 24. # Looks like you planned 9 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-9 Failed 9/9 tests, 0.00% okay Failed 5/5 test scripts, 0.00% okay. 49/49 subtests failed, 0.00% okay. Failed Test Stat Wstat Total Fail Failed List of Failed ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- t/00_compile.t 2 512 2 2 100.00% 1-2 t/01_installdb.t 2 512 2 4 200.00% 1-2 t/02_basic.t 255 65280 16 31 193.75% 1-16 t/03_polevault.t 255 65280 20 39 195.00% 1-20 t/04_km.t 255 65280 9 17 188.89% 1-9 make: *** [test_dynamic] Error 2