Checking if your kit is complete...
Looks good
Writing Makefile for IOC
cp lib/IOC.pm blib/lib/IOC.pm
cp lib/IOC/Service/Parameterized.pm blib/lib/IOC/Service/Parameterized.pm
cp lib/IOC/Service/Literal.pm blib/lib/IOC/Service/Literal.pm
cp lib/IOC/Proxy/Interfaces.pm blib/lib/IOC/Proxy/Interfaces.pm
cp lib/IOC/Service/SetterInjection.pm blib/lib/IOC/Service/SetterInjection.pm
cp lib/IOC/Service/Prototype.pm blib/lib/IOC/Service/Prototype.pm
cp lib/Test/IOC.pm blib/lib/Test/IOC.pm
cp lib/IOC/Exceptions.pm blib/lib/IOC/Exceptions.pm
cp lib/IOC/Container.pm blib/lib/IOC/Container.pm
cp lib/IOC/Config/XML/SAX/Handler.pm blib/lib/IOC/Config/XML/SAX/Handler.pm
cp lib/IOC/Visitor/SearchForContainer.pm blib/lib/IOC/Visitor/SearchForContainer.pm
cp lib/IOC/Proxy.pm blib/lib/IOC/Proxy.pm
cp lib/IOC/Registry.pm blib/lib/IOC/Registry.pm
cp lib/IOC/Service.pm blib/lib/IOC/Service.pm
cp lib/IOC/Service/ConstructorInjection.pm blib/lib/IOC/Service/ConstructorInjection.pm
cp lib/IOC/Service/Prototype/SetterInjection.pm blib/lib/IOC/Service/Prototype/SetterInjection.pm
cp lib/IOC/Interfaces.pm blib/lib/IOC/Interfaces.pm
cp lib/IOC/Service/Prototype/ConstructorInjection.pm blib/lib/IOC/Service/Prototype/ConstructorInjection.pm
cp lib/IOC/Container/MethodResolution.pm blib/lib/IOC/Container/MethodResolution.pm
cp lib/IOC/Visitor/SearchForService.pm blib/lib/IOC/Visitor/SearchForService.pm
cp lib/IOC/Config/XML.pm blib/lib/IOC/Config/XML.pm
cp lib/IOC/Visitor/ServiceLocator.pm blib/lib/IOC/Visitor/ServiceLocator.pm
Manifying blib/man3/IOC.3
Manifying blib/man3/IOC::Service::Parameterized.3
Manifying blib/man3/IOC::Service::Literal.3
Manifying blib/man3/IOC::Proxy::Interfaces.3
Manifying blib/man3/IOC::Service::SetterInjection.3
Manifying blib/man3/IOC::Service::Prototype.3
Manifying blib/man3/Test::IOC.3
Manifying blib/man3/IOC::Exceptions.3
Manifying blib/man3/IOC::Container.3
Manifying blib/man3/IOC::Visitor::SearchForContainer.3
Manifying blib/man3/IOC::Proxy.3
Manifying blib/man3/IOC::Registry.3
Manifying blib/man3/IOC::Service.3
Manifying blib/man3/IOC::Service::ConstructorInjection.3
Manifying blib/man3/IOC::Service::Prototype::SetterInjection.3
Manifying blib/man3/IOC::Interfaces.3
Manifying blib/man3/IOC::Service::Prototype::ConstructorInjection.3
Manifying blib/man3/IOC::Container::MethodResolution.3
Manifying blib/man3/IOC::Visitor::SearchForService.3
Manifying blib/man3/IOC::Visitor::ServiceLocator.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/010_IOC_test...........................................1..20
ok 1 - use IOC;
ok 2 - use IOC::Exceptions;
ok 3 - use IOC::Interfaces;
ok 4 - use IOC::Registry;
ok 5 - use IOC::Container;
ok 6 - use IOC::Container::MethodResolution;
ok 7 - use IOC::Service;
ok 8 - use IOC::Service::ConstructorInjection;
ok 9 - use IOC::Service::SetterInjection;
ok 10 - use IOC::Service::Literal;
ok 11 - use IOC::Service::Prototype;
ok 12 - use IOC::Service::Prototype::ConstructorInjection;
ok 13 - use IOC::Service::Prototype::SetterInjection;
ok 14 - use IOC::Proxy;
ok 15 - use IOC::Proxy::Interfaces;
ok 16 - use IOC::Visitor::ServiceLocator;
ok 17 - use IOC::Visitor::SearchForService;
ok 18 - use IOC::Visitor::SearchForContainer;
ok 19 - ... our simple example ran successfully
ok 20 - ... our complex example ran successfully
ok
t/020_IOC_Container_test.................................1..32
ok 1 - use IOC::Container;
ok 2 - use IOC::Service;
ok 3 - IOC::Container->can('new')
ok 4 - The object isa IOC::Container
ok 5 - IOC::Container->can('name')
ok 6 - IOC::Container->can('register')
ok 7 - IOC::Container->can('get')
ok 8 - IOC::Container->can('find')
ok 9 - ... our container is named default
ok 10 - ... cannot register without a service object
ok 11 - ... cannot register without a service object
ok 12 - ... cannot register without a service object
ok 13 - ... cannot register without a service object
ok 14 - The object isa IOC::Service
ok 15 - ... service registered successfully
ok 16 - ... cannot register duplicate named service
ok 17 - ... cannot get without a service without a name
ok 18 - ... cannot get without a service that does not exist
ok 19 - ... got the service successfully
ok 20 - ... we got a fetched service
ok 21 - ... and it is the service instance we expected
ok 22 - ... got the service successfully
ok 23 - ... we got a fetched service
ok 24 - ... and it is the service instance we expected
ok 25 - ... these are the services we have
ok 26 - ... got the error we expected
ok 27 - ... got the error we expected
ok 28 - IOC::Container->can('unregister')
ok 29 - ... got the error we expected
ok 30 - ... got the error we expected
ok 31 - ... removed the logger successfully
ok 32 - ... there are no more services installed
ok
t/021_IOC_Container_MethodResolution_test................1..17
ok 1 - use IOC::Container::MethodResolution;
ok 2 - use IOC::Service;
ok 3 - IOC::Container::MethodResolution->can('new')
ok 4 - The object isa IOC::Container::MethodResolution
ok 5 - The object isa IOC::Container
ok 6 - IOC::Container::MethodResolution->can('register')
ok 7 - IOC::Container::MethodResolution->can('name')
ok 8 - ... the name is as we expect it to be
ok 9 - ... the method resolved correctly
ok 10 - ... and the value is as we expected
ok 11 - ... the service must exists or we get an exception
ok 12 - ... the method resolved correctly
ok 13 - ... and the value is as we expected
ok 14 - The object isa IOC::Container::MethodResolution
ok 15 - The object isa IOC::Container
ok 16 - ... the method resolved correctly
ok 17 - ... and the value is as we expected
ok
t/022_IOC_Container_SubContainers_test...................1..37
ok 1 - use IOC::Container;
ok 2 - use IOC::Service;
ok 3 - IOC::Container->can('new')
ok 4 - The object isa IOC::Container
ok 5 - IOC::Container->can('setParentContainer')
ok 6 - IOC::Container->can('getParentContainer')
ok 7 - IOC::Container->can('isRootContainer')
ok 8 - IOC::Container->can('addSubContainer')
ok 9 - IOC::Container->can('addSubContainers')
ok 10 - IOC::Container->can('hasSubContainers')
ok 11 - IOC::Container->can('getSubContainerList')
ok 12 - IOC::Container->can('getSubContainer')
ok 13 - IOC::Container->can('getAllSubContainers')
ok 14 - The object isa IOC::Container
ok 15 - The object isa IOC::Container
ok 16 - The object isa IOC::Container
ok 17 - The object isa IOC::Container
ok 18 - ... we do not have any subcontainers
ok 19 - ... we do have subcontainers now
ok 20 - ... this is our first sub container
ok 21 - ... this is our second sub container
ok 22 - ... this is our third sub container
ok 23 - ... this is our fourth sub container
ok 24 - ... we have the same sub_containers
ok 25 - ... we have the same sub_container names
ok 26 - ... got the error we expected
ok 27 - ... got the error we expected
ok 28 - ... got the error we expected
ok 29 - ... got the error we expected
ok 30 - ... got the error we expected
ok 31 - ... got the error we expected
ok 32 - ... got the error we expected
ok 33 - ... got the error we expected
ok 34 - ... got the error we expected
ok 35 - ... got the error we expected
ok 36 - ... got the error we expected
ok 37 - ... got the error we expected
ok
t/023_IOC_Container_Visitors_test........................1..53
ok 1 - use IOC::Container;
ok 2 - use IOC::Service;
ok 3 - use IOC::Visitor::ServiceLocator;
ok 4 - use IOC::Visitor::SearchForService;
ok 5 - use IOC::Visitor::SearchForContainer;
ok 6 - IOC::Container->can('new')
ok 7 - IOC::Visitor::ServiceLocator->can('new')
ok 8 - The object isa IOC::Container
ok 9 - IOC::Container->can('accept')
ok 10 - IOC::Container->can('find')
ok 11 - The object isa IOC::Visitor::ServiceLocator
ok 12 - ... it worked
ok 13 - ... we got a service
ok 14 - ... got our expected service
ok 15 - The object isa IOC::Visitor::ServiceLocator
ok 16 - ... it worked
ok 17 - ... we got a service
ok 18 - ... got our expected service
ok 19 - The object isa IOC::Visitor::ServiceLocator
ok 20 - ... it worked
ok 21 - ... we got a service
ok 22 - ... got our expected service
ok 23 - The object isa IOC::Visitor::ServiceLocator
ok 24 - ... it worked
ok 25 - ... we got a service
ok 26 - ... got our expected service
ok 27 - The object isa IOC::Visitor::ServiceLocator
ok 28 - ... got the error we expected
ok 29 - The object isa IOC::Visitor::ServiceLocator
ok 30 - ... got the error we expected
ok 31 - ... got the error we expected
ok 32 - ... got the error we expected
ok 33 - ... got the error we expected
ok 34 - ... got the error we expected
ok 35 - ... got the error we expected
ok 36 - ... got the error we expected
ok 37 - The object isa IOC::Visitor::ServiceLocator
ok 38 - ... got the error we expected
ok 39 - ... got the error we expected
ok 40 - ... got the error we expected
ok 41 - ... got the error we expected
ok 42 - ... got the error we expected
ok 43 - The object isa IOC::Visitor::SearchForService
ok 44 - ... got the error we expected
ok 45 - ... got the error we expected
ok 46 - ... got the error we expected
ok 47 - ... got the error we expected
ok 48 - ... got the error we expected
ok 49 - The object isa IOC::Visitor::SearchForContainer
ok 50 - ... got the error we expected
ok 51 - ... got the error we expected
ok 52 - ... got the error we expected
ok 53 - ... got the error we expected
ok
t/024_IOC_Container_Proxy_test...........................1..27
ok 1 - use IOC::Container;
ok 2 - use IOC::Service;
ok 3 - use IOC::Proxy;
ok 4 - The object isa IOC::Container
ok 5 - ... registered the first service ok
ok 6 - The object isa Test::Proxy::One
ok 7 - ... we are not proxied yet
ok 8 - ... got the result we expected
ok 9 - The object isa IOC::Proxy
ok 10 - ... added proxy to the first service ok
ok 11 - The object isa Test::Proxy::One::_::Proxy
ok 12 - The object isa Test::Proxy::One
ok 13 - ... got the result we expected
ok 14 - ... got the method calls we expected
ok 15 - ... we are not being double proxied
ok 16 - The object isa IOC::Proxy
ok 17 - ... registered the second service ok
ok 18 - The object isa Test::Proxy::Two::_::Proxy
ok 19 - The object isa Test::Proxy::Two
ok 20 - ... got the result we expected
ok 21 - ... got the method calls we expected
ok 22 - ... got the error we expected
ok 23 - ... got the error we expected
ok 24 - ... got the error we expected
ok 25 - ... got the error we expected
ok 26 - ... got the error we expected
ok 27 - ... got the error we expected
ok
t/025_IOC_Container_cyclical_test........................1..65
ok 1 - use IOC::Container;
ok 2 - use IOC::Service::SetterInjection;
ok 3 - ... we got our A object ok
ok 4 - The object isa A
ok 5 - The object isa B
ok 6 - ... and it is actually a B object too
ok 7 - ... make sure our B object works as expected
ok 8 - The object isa A
ok 9 - ... but this it is actually a IOC::Service::Deferred object
ok 10 - ... this should inflate our deferred A object
ok 11 - ... now this should be an A object
ok 12 - ... and our A instances are both the same since they are singletons
ok 13 - ... we got our C object ok
ok 14 - The object isa C
ok 15 - The object isa D
ok 16 - ... and it is actually a D object too
ok 17 - The object isa E
ok 18 - ... and it is actually a E object too
ok 19 - The object isa F
ok 20 - ... and it is actually a F object too
ok 21 - The object isa C
ok 22 - ... however this is actually an IOC::Service::Deferred object
ok 23 - The object isa D
ok 24 - ... but now we have been infalted into a proper C object
ok 25 - ... we got our G object ok
ok 26 - The object isa G
ok 27 - The object isa H
ok 28 - ... and it is actually a H object too
ok 29 - The object isa I
ok 30 - ... and it is actually a I object too
ok 31 - The object isa J
ok 32 - ... and it is actually a J object too
ok 33 - The object isa G
ok 34 - ... and it is actually an IOC::Service::Deferred object
ok 35 - The object isa H
ok 36 - ... and it is actually the inflated G object now
ok 37 - The object isa K
ok 38 - ... and it is actually a K object too
ok 39 - ... and this is our L string
ok 40 - ... we got a deferred M
ok 41 - ... and we got the right output
ok 42 - ... we got our M object ok
ok 43 - The object isa M
ok 44 - The object isa N
ok 45 - ... this an IOC::Service::Deferred instance
ok 46 - ... make sure our N object works as expected
ok 47 - ... this now an N instance
ok 48 - The object isa M
ok 49 - ... but this it is actually an M object since it was resolved earlier
ok 50 - ... and our M instances are both the same since they are singletons
ok 51 - ... got the error we expected
ok 52 - ... got the error we expected
ok 53 - ... got the error we expected
ok 54 - ... we got our A object ok
ok 55 - The object isa A
ok 56 - The object isa A
ok 57 - ... but this it is actually a IOC::Service::Deferred object
ok 58 - ... we dont have this method
ok 59 - ... now this it is actually a A object
ok 60 - ... we got our A object ok
ok 61 - The object isa A
ok 62 - The object isa A
ok 63 - ... but this it is actually a IOC::Service::Deferred object
ok 64 - ... got the error we expected
ok 65 - ... now this it is actually a A object
ok
t/030_IOC_Service_test...................................1..22
ok 1 - use IOC::Service;
ok 2 - use IOC::Container;
ok 3 - IOC::Service->can('new')
ok 4 - ... a service must be created with a name
ok 5 - ... a service must be created with a CODE block
ok 6 - ... a service must be created with a CODE block
ok 7 - ... a service must be created with a CODE block
ok 8 - The object isa IOC::Service
ok 9 - IOC::Service->can('setContainer')
ok 10 - IOC::Service->can('instance')
ok 11 - ... cannot create an instance without a container
ok 12 - ... must have a container object to set the container
ok 13 - ... must have a container object to set the container
ok 14 - ... must have a container object to set the container
ok 15 - ... must have a container object to set the container
ok 16 - The object isa IOC::Container
ok 17 - ... set container successfully
ok 18 - The object isa IOC::Container
ok 19 - The object isa Logger
ok 20 - The object isa Logger
ok 21 - ... each logger instance is the same
ok 22 - ... got the correct initilization error
ok
t/031_IOC_Service_ConstructorInjection_test..............1..39
ok 1 - use IOC::Service::ConstructorInjection;
ok 2 - use IOC::Container;
ok 3 - IOC::Service::ConstructorInjection->can('new')
ok 4 - The object isa IOC::Service::ConstructorInjection
ok 5 - The object isa IOC::Service
ok 6 - The object isa IOC::Service::ConstructorInjection
ok 7 - The object isa IOC::Service
ok 8 - The object isa IOC::Container
ok 9 - IOC::Service::ConstructorInjection->can('instance')
ok 10 - The object isa Logger
ok 11 - The object isa File
ok 12 - The object isa IOC::Container
ok 13 - The object isa IOC::Service::ConstructorInjection
ok 14 - The object isa IOC::Service
ok 15 - The object isa IOC::Service::ConstructorInjection
ok 16 - The object isa IOC::Service
ok 17 - The object isa IOC::Container
ok 18 - The object isa Logger
ok 19 - The object isa File
ok 20 - The object isa IOC::Container
ok 21 - The object isa IOC::Service::ConstructorInjection
ok 22 - The object isa IOC::Service
ok 23 - The object isa IOC::Service::ConstructorInjection
ok 24 - The object isa IOC::Service
ok 25 - The object isa IOC::Container
ok 26 - The object isa Logger
ok 27 - The object isa File
ok 28 - The object isa IOC::Container
ok 29 - The object isa IOC::Service::ConstructorInjection
ok 30 - The object isa IOC::Service
ok 31 - ... and the service loads correctly
ok 32 - The object isa IOC::Container::MethodResolution
ok 33 - ... cannot create a constructor injection without a component class
ok 34 - ... cannot create a constructor injection without a component class constructor
ok 35 - ... cannot create a constructor injection without a parameter list
ok 36 - ... cannot create a constructor injection without an array ref as parameter list
ok 37 - ... cannot create a constructor injection without an array ref as parameter list
ok 38 - ... cannot create a constructor injection without real class
ok 39 - ... cannot create a constructor injection without a proper class constructor name
ok
t/032_IOC_Service_SetterInjection_test...................1..37
ok 1 - use IOC::Service::SetterInjection;
ok 2 - use IOC::Container;
ok 3 - IOC::Service::SetterInjection->can('new')
ok 4 - The object isa IOC::Container
ok 5 - The object isa IOC::Service::SetterInjection
ok 6 - The object isa IOC::Service
ok 7 - IOC::Service::SetterInjection->can('instance')
ok 8 - ... got the right log file handle
ok 9 - ... got the right log file format
ok 10 - The object isa Logger
ok 11 - The object isa IOC::Container
ok 12 - The object isa IOC::Service::SetterInjection
ok 13 - The object isa IOC::Service
ok 14 - IOC::Service::SetterInjection->can('instance')
ok 15 - ... got the right log file handle
ok 16 - ... got the right log file format
ok 17 - The object isa Logger
ok 18 - The object isa IOC::Container
ok 19 - The object isa IOC::Service::SetterInjection
ok 20 - The object isa IOC::Service
ok 21 - IOC::Service::SetterInjection->can('instance')
ok 22 - ... got the right log file handle
ok 23 - ... got the right log file format
ok 24 - The object isa Logger
ok 25 - The object isa IOC::Container
ok 26 - The object isa IOC::Service::SetterInjection
ok 27 - The object isa IOC::Service
ok 28 - ... and the service loads correctly
ok 29 - The object isa IOC::Container::MethodResolution
ok 30 - ... cannot create a setter injection without a component class
ok 31 - ... cannot create a setter injection without a component class constructor
ok 32 - ... cannot create a setter injection without a setter parameter list
ok 33 - ... cannot create a setter injection without an array ref as setter parameter list
ok 34 - ... cannot create a setter injection without an array ref as setter parameter list
ok 35 - ... cannot create a setter injection with a bad object
ok 36 - ... cannot create a setter injection with a bad constructor
ok 37 - ... cannot create a setter injection with a bad setter methods
ok
t/033_IOC_Service_Prototype_test.........................1..16
ok 1 - use IOC::Service::Prototype;
ok 2 - use IOC::Container;
ok 3 - IOC::Service::Prototype->can('new')
ok 4 - The object isa IOC::Service::Prototype
ok 5 - The object isa IOC::Service
ok 6 - IOC::Service::Prototype->can('instance')
ok 7 - ... cannot create an instance without a container
ok 8 - The object isa IOC::Container
ok 9 - ... set container successfully
ok 10 - The object isa IOC::Container
ok 11 - The object isa Logger
ok 12 - The object isa IOC::Container
ok 13 - The object isa Logger
ok 14 - ... each logger instance is the same
ok 15 - ... one logger has been destoryed
ok 16 - ... two loggers were destoryed
ok
t/034_IOC_Service_Prototype_ConstructorInjection_test....1..19
ok 1 - use IOC::Service::Prototype::ConstructorInjection;
ok 2 - use IOC::Container;
ok 3 - IOC::Service::Prototype::ConstructorInjection->can('new')
ok 4 - The object isa IOC::Service::Prototype::ConstructorInjection
ok 5 - The object isa IOC::Service::ConstructorInjection
ok 6 - The object isa IOC::Service::Prototype
ok 7 - The object isa IOC::Service
ok 8 - The object isa IOC::Service::Prototype::ConstructorInjection
ok 9 - The object isa IOC::Service::ConstructorInjection
ok 10 - The object isa IOC::Service::Prototype
ok 11 - The object isa IOC::Service
ok 12 - The object isa IOC::Container
ok 13 - IOC::Service::Prototype::ConstructorInjection->can('instance')
ok 14 - The object isa Logger
ok 15 - The object isa File
ok 16 - The object isa Logger
ok 17 - The object isa File
ok 18 - ... these are prototypes, not constructors
ok 19 - ... these are prototypes, not constructors
ok
t/035_IOC_Service_Prototype_SetterInjection_test.........1..16
ok 1 - use IOC::Service::Prototype::SetterInjection;
ok 2 - use IOC::Container;
ok 3 - IOC::Service::Prototype::SetterInjection->can('new')
ok 4 - The object isa IOC::Container
ok 5 - The object isa IOC::Service::Prototype::SetterInjection
ok 6 - The object isa IOC::Service::SetterInjection
ok 7 - The object isa IOC::Service::Prototype
ok 8 - The object isa IOC::Service
ok 9 - IOC::Service::Prototype::SetterInjection->can('instance')
ok 10 - ... got the right log file handle
ok 11 - ... got the right log file format
ok 12 - The object isa Logger
ok 13 - ... got the right log file handle
ok 14 - ... got the right log file format
ok 15 - The object isa Logger
ok 16 - ... these are not the same instances
ok
t/036_IOC_Service_Literal_test...........................1..10
ok 1 - use IOC::Service::Literal;
ok 2 - IOC::Service::Literal->can('new')
ok 3 - The object isa IOC::Service::Literal
ok 4 - The object isa IOC::Service
ok 5 - ... got the name back
ok 6 - ... got the instance value back
ok 7 - ... this is a no-op
ok 8 - ... this is a no-op
ok 9 - ... got the error we expected
ok 10 - ... got the error we expected
ok
t/040_IOC_Registry_test..................................1..61
ok 1 - use IOC::Registry;
ok 2 - use IOC::Service;
ok 3 - use IOC::Container;
ok 4 - IOC::Registry->can('new')
ok 5 - The object isa IOC::Registry
ok 6 - The object isa Class::StrongSingleton
ok 7 - ... this really is a singleton
ok 8 - The object isa IOC::Container
ok 9 - The object isa IOC::Container
ok 10 - The object isa IOC::Container
ok 11 - ... created our hierarchy successfully
ok 12 - ... got the right container
ok 13 - ... got the right container
ok 14 - ... got the right container
ok 15 - ... got the list of containers we expected
ok 16 - ... we found the service
ok 17 - ... and the service is what we expected
ok 18 - ... we did not find the service
ok 19 - ... we found the container
ok 20 - The object isa IOC::Container
ok 21 - ... and it is the container we expected
ok 22 - ... we did not find the container
ok 23 - ... we found the service
ok 24 - ... and the service is what we expected
ok 25 - ... we found the container
ok 26 - The object isa IOC::Container
ok 27 - ... and it is the container we expected
ok 28 - ... we have this container
ok 29 - ... unregistered the container successfully
ok 30 - ... got the unregistered container
ok 31 - The object isa IOC::Container
ok 32 - ... and it is test2
ok 33 - ... we no longer have this container
ok 34 - ... got an error
ok 35 - ... got the list of containers we expected
ok 36 - ... we have this container
ok 37 - ... unregistered the container successfully
ok 38 - ... got the unregistered container
ok 39 - The object isa IOC::Container
ok 40 - ... and it is test3
ok 41 - ... we no longer have this container
ok 42 - ... got an error
ok 43 - ... got the list of containers we expected
ok 44 - ... got an error
ok 45 - ... got an error
ok 46 - ... got an error
ok 47 - ... got an error
ok 48 - ... got an error
ok 49 - ... got an error
ok 50 - ... got an error
ok 51 - ... got an error
ok 52 - ... got an error
ok 53 - ... got an error
ok 54 - ... got an error
ok 55 - ... got an error
ok 56 - ... got an error
ok 57 - ... got an error
ok 58 - ... got an error
ok 59 - ... got an error
ok 60 - ... got an error
ok 61 - ... got an error
ok
t/041_IOC_Registry_aliasing_test.........................1..15
ok 1 - use IOC::Registry;
ok 2 - use IOC::Service;
ok 3 - use IOC::Container;
ok 4 - IOC::Registry->can('new')
ok 5 - The object isa IOC::Registry
ok 6 - The object isa IOC::Container
ok 7 - ... got the service ok
ok 8 - ... got the service
ok 9 - The object isa My::Test::Service
ok 10 - ... got the service ok
ok 11 - ... got the service
ok 12 - The object isa My::Test::Service
ok 13 - ... these are the same objects
ok 14 - ... got the right error
ok 15 - ... got the right error
ok
t/050_IOC_Proxy_test.....................................1..67
ok 1 - use IOC::Proxy;
ok 2 - The object isa Base::Three
ok 3 - The object isa IOC::Proxy
ok 4 - The object isa Base::Three::_::Proxy
ok 5 - The object isa Base::Three
ok 6 - The object isa Base::Two
ok 7 - The object isa Base::One
ok 8 - The object isa Base
ok 9 - ... these are the same instances deep down
ok 10 - The object isa Base::Three::_::Proxy
ok 11 - ... got what we expected
ok 12 - ... our proxy is a Base::Three
ok 13 - ... our proxy is a Base::Two
ok 14 - ... our proxy is a Base::One
ok 15 - ... our proxy is a Base
ok 16 - Base::Three::_::Proxy->can('new')
ok 17 - Base::Three::_::Proxy->can('base_two_test')
ok 18 - Base::Three::_::Proxy->can('base_two')
ok 19 - Base::Three::_::Proxy->can('test')
ok 20 - Base::Three::_::Proxy->can('base_one_test')
ok 21 - Base::Three::_::Proxy->can('base_one')
ok 22 - Base::Three::_::Proxy->can('base')
ok 23 - ... our proxy responded correctly to "can"
ok 24 - ... our proxy responded correctly to "can"
ok 25 - ... our proxy responded correctly to "can"
ok 26 - ... our proxy responded correctly to "can"
ok 27 - ... our proxy responded correctly to "can"
ok 28 - ... our proxy responded correctly to "can"
ok 29 - ... our proxy responded correctly to "can"
ok 30 - ... nothing, as we expected
ok 31 - ... got what we expected
ok 32 - ... got what we expected
ok 33 - ... got what we expected
ok 34 - ... got what we expected
ok 35 - ... got what we expected
ok 36 - ... got the caller info we expected
ok 37 - ... got all that we expected
ok 38 - ... they are not the same instance
ok 39 - The object isa Base::Three::_::Proxy
ok 40 - The object isa Base::Three
ok 41 - The object isa Base::Two
ok 42 - The object isa Base::One
ok 43 - The object isa Base
ok 44 - ... our proxy is a Base::Three
ok 45 - ... our proxy is a Base::Two
ok 46 - ... our proxy is a Base::One
ok 47 - ... our proxy is a Base
ok 48 - Base::Three::_::Proxy->can('new')
ok 49 - Base::Three::_::Proxy->can('base_two_test')
ok 50 - Base::Three::_::Proxy->can('base_two')
ok 51 - Base::Three::_::Proxy->can('test')
ok 52 - Base::Three::_::Proxy->can('base_one_test')
ok 53 - Base::Three::_::Proxy->can('base_one')
ok 54 - Base::Three::_::Proxy->can('base')
ok 55 - ... got what we expected
ok 56 - ... got what we expected
ok 57 - ... got what we expected
ok 58 - ... got what we expected
ok 59 - ... got what we expected
ok 60 - ... got the caller info we expected
ok 61 - ... our proxy responded correctly to "can"
ok 62 - ... our proxy responded correctly to "can"
ok 63 - ... our proxy responded correctly to "can"
ok 64 - ... our proxy responded correctly to "can"
ok 65 - ... our proxy responded correctly to "can"
ok 66 - ... our proxy responded correctly to "can"
ok 67 - ... our proxy responded correctly to "can"
ok
t/051_IOC_Proxy_edge_case_test...........................1..30
ok 1 - use IOC::Proxy;
ok 2 - The object isa Base::Autoload
ok 3 - The object isa IOC::Proxy
ok 4 - The object isa Base::Autoload::_::Proxy
ok 5 - The object isa Base::Autoload
ok 6 - ... got what we expected
ok 7 - ... got the method calls we exected
ok 8 - The object isa IOC::Proxy
ok 9 - The object isa Base::Destroy
ok 10 - The object isa Base::Destroy::_::Proxy
ok 11 - The object isa Base::Destroy
ok 12 - ... got no method calls as we exected
ok 13 - ... got no method calls as we exected
ok 14 - ... got the method calls we exected
ok 15 - The object isa Base::Overload
ok 16 - The object isa IOC::Proxy
ok 17 - The object isa Base::Overload::_::Proxy
ok 18 - The object isa Base::Overload
ok 19 - ... got the thing we expected
ok 20 - ... got the method calls we exected
ok 21 - ... we know at least one method has been registered
ok 22 - The object isa IOC::Proxy
ok 23 - The object isa Base::Nothing
ok 24 - The object isa Base::Nothing::_::Proxy
ok 25 - The object isa Base::Nothing
ok 26 - ... got the stuff we expected
ok 27 - ... got the error we expected
ok 28 - ... got the error we expected
ok 29 - ... got the error we expected
ok 30 - ... got the error we expected
ok
t/055_IOC_Proxy_Interfaces_test..........................1..17
ok 1 - use IOC::Proxy::Interfaces;
ok 2 - The object isa KeyableImpl
ok 3 - ... keyable is not yet IKeyable
ok 4 - ... we can get to the misc method
ok 5 - The object isa IOC::Proxy::Interfaces
ok 6 - The object isa IOC::Proxy
ok 7 - The object isa KeyableImpl::_::Proxy
ok 8 - The object isa KeyableImpl
ok 9 - The object isa IKeyable
ok 10 - ... we can no longer get to the misc method
ok 11 - ... but we can get to the method which the interface allows
ok 12 - ... got the right value too
ok 13 - ... but we can get to the method which the interface allows
ok 14 - ... again, we got the right values
ok 15 - ... we get an error
ok 16 - ... there are not method so we get an error
ok 17 - ... we get an error
ok
t/060_IOC_Config_XML_test................................1..39
ok 1 - use IOC::Config::XML;
ok 2 - IOC::Config::XML->can('new')
ok 3 - The object isa IOC::Config::XML
ok 4 - IOC::Config::XML->can('read')
ok 5 - The object isa IOC::Config::XML
ok 6 - ... we read the conf okay
ok 7 - The object isa IOC::Registry
ok 8 - ... got the list of registered containers
ok 9 - The object isa IOC::Container
ok 10 - ... got the right name
ok 11 - ... the right sub container list
ok 12 - The object isa IOC::Container
ok 13 - ... got the right name
ok 14 - ... got the right service list
ok 15 - ... got the right value
ok 16 - ... got the right value
ok 17 - ... got the right value
ok 18 - The object isa My::DBI
ok 19 - ... the right service list
ok 20 - ... got the right logger table
ok 21 - The object isa My::DB::Logger
ok 22 - The object isa My::DBI
ok 23 - ... and it is the same database handle too
ok 24 - ... got the right logger table
ok 25 - The object isa My::Application
ok 26 - ... got the same logger
ok 27 - The object isa My::Template::Factory
ok 28 - ... got the right array value
ok 29 - ... got the right hash value
ok 30 - ... got the right string value
ok 31 - The object isa IOC::Config::XML
ok 32 - ... we read the conf okay
ok 33 - The object isa IOC::Registry
ok 34 - The object isa IOC::Container
ok 35 - ... got the right name
ok 36 - The object isa My::Test
ok 37 - ... and if I get it again, it is the same one
ok 38 - The object isa My::Test2
ok 39 - ... and if I get it again, it is not the same one
ok
t/061_IOC_Config_XML_edge_tests..........................1..39
ok 1 - use IOC::Config::XML;
ok 2 - The object isa IOC::Config::XML
ok 3 - ... we read the conf okay
ok 4 - The object isa IOC::Registry
ok 5 - ... we got nothing
ok 6 - The object isa IOC::Config::XML
ok 7 - ... we read the conf okay
ok 8 - The object isa IOC::Registry
ok 9 - ... we got our nuttin container
ok 10 - The object isa IOC::Container
ok 11 - ... we got nuttin in our nuttin container
ok 12 - The object isa IOC::Config::XML
ok 13 - ... we read the conf okay
ok 14 - The object isa IOC::Registry
ok 15 - The object isa IOC::Container
ok 16 - ... got the right name
ok 17 - The object isa My::Test1
ok 18 - ... and if I get it again, it is the same one
ok 19 - The object isa My::Test1
ok 20 - ... and if I get it again, it is not the same one
ok 21 - The object isa My::Test2
ok 22 - ... and if I get it again, it is the same one
ok 23 - The object isa My::Test2
ok 24 - ... and if I get it again, it is not the same one
ok 25 - The object isa IOC::Config::XML
ok 26 - ... we read the conf okay
ok 27 - The object isa IOC::Registry
ok 28 - The object isa IOC::Container
ok 29 - The object isa My::Test::Constructor
ok 30 - The object isa IOC::Config::XML
ok 31 - ... we read the conf okay
ok 32 - The object isa IOC::Registry
ok 33 - The object isa IOC::Container
ok 34 - The object isa My::Test::Setter
ok 35 - The object isa IOC::Config::XML
ok 36 - ... we read the conf okay
ok 37 - The object isa IOC::Registry
ok 38 - The object isa IOC::Container
ok 39 - ... got the right service
ok
t/062_IOC_Config_XML_error_test..........................1..24
ok 1 - use IOC::Config::XML;
ok 2 - The object isa IOC::Config::XML
ok 3 - ... got the error we expected
ok 4 - ... got the error we expected
ok 5 - ... got the error we expected
ok 6 - ... got the error we expected
ok 7 - ... got the error we expected
ok 8 - ... got the error we expected
ok 9 - ... got the error we expected
ok 10 - ... got the error we expected
ok 11 - ... got the error we expected
ok 12 - ... got the error we expected
ok 13 - ... got the error we expected
ok 14 - ... got the error we expected
ok 15 - ... got the error we expected
ok 16 - ... got the error we expected
ok 17 - ... got the error we expected
ok 18 - ... got the error we expected
ok 19 - ... got the error we expected
ok 20 - ... got the error we expected
ok 21 - ... got the error we expected
ok 22 - ... got the error we expected
ok 23 - ... got the error we expected
ok 24 - ... got the error we expected
ok
t/063_IOC_Config_XML_include_test........................1..6
ok 1 - use IOC::Config::XML;
ok 2 - The object isa IOC::Config::XML
Only ASCII encoding allowed without perl 5.7.2 or higher. You tried: ISO-8859-1
# Looks like you planned 6 tests but only ran 2.
# Looks like your test died just after 2.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 3-6
	Failed 4/6 tests, 33.33% okay
t/070_IOC_Parameterized..................................1..11
ok 1 - use IOC;
ok 2 - use IOC::Service::Parameterized;
ok 3 - ... set container successfully
ok 4 - The object isa Localized::Object
ok 5 - ... got the right locale (en)
ok 6 - The object isa Localized::Object
ok 7 - ... got the right locale (fr_ca)
ok 8 - The object isa Localized::Object
ok 9 - ... got the right locale (en)
ok 10 - The object isa Localized::Object
ok 11 - ... got the right locale (fr_ca)
ok
t/071_IOC_Parameterized_w_Registry.......................1..8
ok 1 - use IOC;
ok 2 - use IOC::Registry;
ok 3 - use IOC::Service::Parameterized;
ok 4 - ... set container successfully
ok 5 - The object isa Localized::Object
ok 6 - ... got the right locale (en)
ok 7 - The object isa Localized::Object
ok 8 - ... got the right locale (fr_ca)
ok
t/100_Test_IOC...........................................1..18
ok 1 - use Test::IOC;
ok 2 - The container '/moose' exists in the registry
ok 3 - ... these are the containers in the reg
ok 4 - The services at '/moose' are application, log_file, logger
ok 5 - The service '/moose/application' exists in the registry
ok 6 - The object isa Application
ok 7 - app is same as in container
ok 8 - Application->can('logger')
ok 9 - Application->can('run')
ok 10 - The service '/moose/log_file' exists in the registry
ok 11 - log file is same as in container
ok 12 - The service '/moose/logger' exists in the registry
ok 13 - The object isa FileLogger
ok 14 - logger service returned OK
ok 15 - FileLogger->can('log_file')
ok 16 - '/moose/log_file' is a literal service
ok 17 - '/moose/logger' is a prototype service
ok 18 - '/moose/application' is a singleton service
ok
t/pod....................................................1..0 # Skip Test::Pod 1.14 required for testing POD
skipped
        all skipped: Test::Pod 1.14 required for testing POD
t/pod_coverage...........................................1..0 # Skip Test::Pod::Coverage 1.04 required for testing POD coverage
skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
Failed 1/28 test scripts, 96.43% okay. 4/745 subtests failed, 99.46% okay.
Failed Test                         Stat Wstat Total Fail  Failed  List of Failed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
t/063_IOC_Config_XML_include_test.t  255 65280     6    8 133.33%  3-6
2 tests skipped.
make: *** [test_dynamic] Error 11