Checking if your kit is complete...
Looks good
Writing Makefile for List::Maker
cp lib/List/Maker.pm blib/lib/List/Maker.pm
Manifying blib/man3/List::Maker.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/00.load.........1..1
# Testing List::Maker 0.0.3
ok 1 - use List::Maker;
ok
t/error...........ok 1 - Sequence <1, 0, -1...> will never reach 10
ok 2 - Sequence <1, 2, 3...> will never reach -10
ok 3 - Sequence <1, 3, 5...> will never reach -10
ok 4 - Sequence <1, -2, -5...> will never reach 10
ok 5 - Sequence <1, 1, 1...> will never reach 10
ok 6 - Sequence <2, 2, 2...> will never reach 10
ok 7 - Sequence <3, 3, 3...> will never reach -10
ok 8 - Sequence <4, 4, 4...> will never reach -10
ok 9 - Sequence <1, 1, 1...> will reach 1
ok 10 - Sequence <2, 2, 2...> will reach 2
1..10
ok
t/filter..........ok 1 - <1..10 : odd X>
ok 2 - <1..10x3 : odd N>
ok 3 - <1,5..10 : odd I>
ok 4 - <1,5..10 : odd \$_>
ok 5 - <1..20 : /7/>
1..5
ok
t/interp..........ok 1 - <$to..$from>
ok 2 - <$from..$to x $by>
ok 3 - <$from, $by,..$to>
ok 4 - <10..$from>
ok 5 - < $range >
1..5
ok
t/pod-coverage....1..0 # Skip Test::Pod::Coverage 1.04 required for testing POD coverage
skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............1..0 # Skip Test::Pod 1.14 required for testing POD
skipped
        all skipped: Test::Pod 1.14 required for testing POD
t/range...........ok 1 - <1..10>
ok 2 - <-1..10>
ok 3 - <1..1>
ok 4 - <10..1>
ok 5 - <1.1..9.9>
ok 6 - <9.9..1.1>
1..6
ok
t/range_by........ok 1 - <1..10x1>
ok 2 - <1..10 x1>
ok 3 - <1..10x 1>
ok 4 - <1..10 x 1>
ok 5 - <-1..10>
ok 6 - <1..1>
ok 7 - <1..1>
ok 8 - <10..1>
ok 9 - <1.1..9.9x1>
ok 10 - <9.9..1.1x-1>
ok 11 - <1..10x2>
ok 12 - <1..10x3>
ok 13 - <1..10x4>
ok 14 - <1..10x5>
ok 15 - <1..10x6>
ok 16 - <1..10x7>
ok 17 - <1..10x8>
ok 18 - <1..10x9>
ok 19 - <1..10x10>
ok 20 - <1.1..9.9x2.5>
1..20
ok
t/tri_range.......ok 1 - <1..10x1>
ok 2 - <1..10 x1>
ok 3 - <1..10x 1>
ok 4 - <-1..10>
ok 5 - <1..1>
ok 6 - <1..1>
ok 7 - <10..1>
ok 8 - <1.1..9.9x1>
ok 9 - <9.9..1.1x-1>
ok 10 - <1..10x2>
ok 11 - <1..10x3>
ok 12 - <1..10x4>
ok 13 - <1..10x5>
ok 14 - <1..10x6>
ok 15 - <1..10x7>
ok 16 - <1..10x8>
ok 17 - <1..10x9>
ok 18 - <1.1..9.9x2.5>
1..18
ok
t/wordlist........ok 1 - < a word list >
ok 2 - < >
ok 3 - < "a word" list >
ok 4 - < 'a word' list >
ok 5 - < "o'word" list >
ok 6 - < 'u"word' list >
1..6
ok
All tests successful, 2 tests skipped.
Files=10, Tests=71,  8 wallclock secs ( 6.62 cusr +  0.49 csys =  7.11 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/List/Maker.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/List::Maker.3
Writing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/List/Maker/.packlist
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi/perllocal.pod