Checking if your kit is complete...
Looks good
Writing Makefile for POE::Filter::PPPHDLC
cp lib/POE/Filter/PPPHDLC.pm blib/lib/POE/Filter/PPPHDLC.pm
Manifying blib/man3/POE::Filter::PPPHDLC.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/00use....1..3
ok 1 - use POE::Filter::PPPHDLC;
ok 2 - The object isa POE::Filter::PPPHDLC
ok 3 - framing buffer empty
ok
t/20fcs....1..13
ok 1 - fcs computation
ok 2 - fcs checking
ok 3 - frame checking
ok 4 - trail 1
ok 5 - trail 2
ok 6 - trail 3
ok 7 - trail 4
ok 8 - trail 5
ok 9 - trail 6
ok 10 - trail 7
ok 11 - trail 8
ok 12 - trail 9
ok 13 - trail 10
ok
t/21get....1..6
ok 1 - pending returns arrayref
ok 2 - pending returns correct frame
ok 3 - get returns arrayref
ok 4 - get returns only two frames
ok 5 - get returns frame from buffer
ok 6 - get returns new frame
ok
All tests successful.
Files=3, Tests=22,  2 wallclock secs ( 1.68 cusr +  0.12 csys =  1.80 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/POE/Filter/PPPHDLC.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/POE::Filter::PPPHDLC.3
Writing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/POE/Filter/PPPHDLC/.packlist
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi/perllocal.pod