Checking if your kit is complete...
Looks good
Writing Makefile for Proc::BackOff
cp lib/Proc/BackOff/Exponential.pm blib/lib/Proc/BackOff/Exponential.pm
cp lib/Proc/BackOff/Linear.pm blib/lib/Proc/BackOff/Linear.pm
cp lib/Proc/BackOff.pm blib/lib/Proc/BackOff.pm
cp lib/Proc/BackOff/Random.pm blib/lib/Proc/BackOff/Random.pm
Manifying blib/man3/Proc::BackOff::Exponential.3
Manifying blib/man3/Proc::BackOff::Linear.3
Manifying blib/man3/Proc::BackOff.3
Manifying blib/man3/Proc::BackOff::Random.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/01_require...............1..2
ok 1 - use Proc::BackOff;
ok 2 - Proc::BackOff->can(...)
ok
t/02_basic.................1..27
ok 1 - use Proc::BackOff::Random;
ok 2 - use Proc::BackOff::Linear;
ok 3 - use Proc::BackOff::Exponential;
ok 4 - use Proc::BackOff::Random;
ok 5 - Proc::BackOff::Random->can('calculate_back_off')
ok 6 - use Proc::BackOff::Linear;
ok 7 - Proc::BackOff::Linear->can('calculate_back_off')
# Errors expected
Proc::BackOff::Random: Minimum value not set at blib/lib/Proc/BackOff/Random.pm line 59.
Proc::BackOff::Random: Maximum value not set at blib/lib/Proc/BackOff/Random.pm line 64.
ok 8 - use Proc::BackOff::Exponential;
ok 9 - Proc::BackOff::Exponential->can('calculate_back_off')
ok 10 - testing invalid input
Proc::BackOff::Random: Maximum value not set at blib/lib/Proc/BackOff/Random.pm line 64.
ok 11 - testing invalid input
Proc::BackOff::Random: Minimum is greater than Maximum at blib/lib/Proc/BackOff/Random.pm line 69.
ok 12 - testing invalid input
ok 13 - testing invalid input
ok 14 - testing invalid input
Proc::BackOff::Linear: Slope value not set at blib/lib/Proc/BackOff/Linear.pm line 60.
Proc::BackOff::Linear: Slope value not set at blib/lib/Proc/BackOff/Linear.pm line 60.
ok 15 - testing invalid input
ok 16 - testing invalid input
Proc::BackOff::Linear: b value not set at blib/lib/Proc/BackOff/Linear.pm line 65.
ok 17 - testing invalid input
Proc::BackOff::Linear: x value not set at blib/lib/Proc/BackOff/Linear.pm line 71.
ok 18 - testing invalid input
ok 19 - testing invalid input
ok 20 - testing invalid input
Proc::BackOff::Exponential: Exponent value not set at blib/lib/Proc/BackOff/Exponential.pm line 70.
Proc::BackOff::Exponential: Exponent value not set at blib/lib/Proc/BackOff/Exponential.pm line 70.
ok 21 - testing invalid input
ok 22 - Object created
Proc::BackOff::Exponential: Base value not set at blib/lib/Proc/BackOff/Exponential.pm line 75.
ok 23 - Object created
Proc::BackOff::Exponential: Base value not set at blib/lib/Proc/BackOff/Exponential.pm line 75.
ok 24 - Object created
ok 25 - Object created
ok 26 - Object created
ok 27 - Object created
ok
t/03_timing_exponential....1..23
ok 1 - use Proc::BackOff::Exponential;
ok 2 - BackOff Object created
ok 3 - delay ok
ok 4 - delay ok
ok 5 - delay ok
ok 6 - delay ok
ok 7 - delay ok
ok 8 - delay ok
ok 9 - delay ok
ok 10 - delay ok
ok 11 - delay ok
ok 12 - delay ok
ok 13 - BackOff Object created
ok 14 - delay ok
ok 15 - delay ok
ok 16 - delay ok
ok 17 - delay ok
ok 18 - delay ok
ok 19 - delay ok
ok 20 - delay ok
ok 21 - delay ok
ok 22 - delay ok
ok 23 - delay ok
ok
t/03_timing_linear.........1..23
ok 1 - use Proc::BackOff::Linear;
ok 2 - BackOff Object created
ok 3 - delay ok
ok 4 - delay ok
ok 5 - delay ok
ok 6 - delay ok
ok 7 - delay ok
ok 8 - delay ok
ok 9 - delay ok
ok 10 - delay ok
ok 11 - delay ok
ok 12 - delay ok
ok 13 - BackOff Object created
ok 14 - delay ok
ok 15 - delay ok
ok 16 - delay ok
ok 17 - delay ok
ok 18 - delay ok
ok 19 - delay ok
ok 20 - delay ok
ok 21 - delay ok
ok 22 - delay ok
ok 23 - delay ok
ok
t/03_timing_random.........1..12
ok 1 - use Proc::BackOff::Random;
ok 2 - BackOff Object created
ok 3 - delay ok
ok 4 - delay ok
ok 5 - delay ok
ok 6 - delay ok
ok 7 - delay ok
ok 8 - delay ok
ok 9 - delay ok
ok 10 - delay ok
ok 11 - delay ok
ok 12 - delay ok
ok
All tests successful.
Files=5, Tests=87,  4 wallclock secs ( 3.38 cusr +  0.23 csys =  3.61 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/Proc/BackOff.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/Proc/BackOff/Exponential.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/Proc/BackOff/Linear.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/Proc/BackOff/Random.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/Proc::BackOff::Exponential.3
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/Proc::BackOff::Linear.3
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/Proc::BackOff.3
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/Proc::BackOff::Random.3
Writing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/Proc/BackOff/.packlist
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi/perllocal.pod