Checking if your kit is complete...
Looks good
Writing Makefile for Test::RandomResults
cp lib/Test/RandomResults.pm blib/lib/Test/RandomResults.pm
Manifying blib/man3/Test::RandomResults.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/00-load...................1..1
# (SEED 41854)
# Testing Test::RandomResults 0.03
ok 1 - use Test::RandomResults;
ok
t/01-is_in..................1..3
# (SEED 29716)
ok 1 - use Test::RandomResults;
ok 2 - simple test
ok 3 - simple test to fail
ok
t/02-length.................1..13
# (SEED 510)
ok 1 - use Test::RandomResults;
ok 2 - length of 123456789 less than 20
ok 3 - length of 123456789 not less than 5
ok 4 - length of 123456789 less than or equal to 20
ok 5 - length of 123456789 less than or equal to 9
ok 6 - length of 123456789 not less than or equal to 5
ok 7 - length of 123456789 equal to 9
ok 8 - length of 123456789 not equal to 10
ok 9 - length of 123456789 greater than 5
ok 10 - length of 123456789 not greater than 20
ok 11 - length of 123456789 greater than or equal to 5
ok 12 - length of 123456789 greater than or equal to 9
ok 13 - length of 123456789 not greater than or equal to 20
ok
t/03-in_between.............1..19
# (SEED 51108)
ok 1 - use Test::RandomResults;
ok 2 - 5 between 1 and 10
ok 3 - 5 between 1 and 5
ok 4 - 5 between 5 and 5
ok 5 - 5 between 5 and 10
ok 6 - 5 not between 10 and 20
ok 7 - 5 not between 1 and 3
ok 8 - 5 not between 1 and 4
ok 9 - 5 not between 6 and 10
ok 10 - 5 not between 7 and 10
ok 11 - b between a and b
ok 12 - b between b and c
ok 13 - b between a and c
ok 14 - b between b and b
ok 15 - bbbbb between a and c
ok 16 - bbbb between a and c
ok 17 - b not between c and d
ok 18 - b not between d and e
ok 19 - bbbbb not between a and bbbb
ok
t/04-in_between_reversed....1..19
# (SEED 88698)
ok 1 - use Test::RandomResults;
ok 2 - 5 between 1 and 10
ok 3 - 5 between 1 and 5
ok 4 - 5 between 5 and 5
ok 5 - 5 between 5 and 10
ok 6 - 5 not between 10 and 20
ok 7 - 5 not between 1 and 3
ok 8 - 5 not between 1 and 4
ok 9 - 5 not between 6 and 10
ok 10 - 5 not between 7 and 10
ok 11 - b between a and b
ok 12 - b between b and c
ok 13 - b between a and c
ok 14 - b between b and b
ok 15 - bbbbb between a and c
ok 16 - bbbb between a and c
ok 17 - b not between c and d
ok 18 - b not between d and e
ok 19 - bbbbb not between a and bbbb
ok
t/pod-coverage..............1..0 # Skip Test::Pod::Coverage 1.04 required for testing POD coverage
skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.......................1..0 # Skip Test::Pod 1.14 required for testing POD
skipped
        all skipped: Test::Pod 1.14 required for testing POD
All tests successful, 2 tests skipped.
Files=7, Tests=55,  4 wallclock secs ( 4.35 cusr +  0.30 csys =  4.65 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/Test/RandomResults.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/man/man3/Test::RandomResults.3
Writing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/Test/RandomResults/.packlist
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi/perllocal.pod