Checking if your kit is complete...
Looks good
Writing Makefile for Device::Modem
cp lib/Device/Modem/UsRobotics.pm blib/lib/Device/Modem/UsRobotics.pm
cp lib/Device/Modem/Protocol/Xmodem.pm blib/lib/Device/Modem/Protocol/Xmodem.pm
cp lib/Device/Modem/Log/Syslog.pm blib/lib/Device/Modem/Log/Syslog.pm
cp Modem.pm blib/lib/Device/Modem.pm
cp lib/Device/Modem/Log/File.pm blib/lib/Device/Modem/Log/File.pm
Manifying blib/man3/Device::Modem::UsRobotics.3
Manifying blib/man3/Device::Modem::Protocol::Xmodem.3
Manifying blib/man3/Device::Modem::Log::Syslog.3
Manifying blib/man3/Device::Modem.3
Manifying blib/man3/Device::Modem::Log::File.3
PERL_DL_NONLAZY=1 /home/cpanrun/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/build/5.6.1/lib/5.6.1/i686-linux-thread-multi -I/home/cpanrun/build/5.6.1/lib/5.6.1 test.pl
1..15
ok 1


*** REMEMBER to run these tests as `root' where required!


    No serial port set up, so *NO* tests will be executed...
    To enable full testing, you can set these environment vars:

        DEV_MODEM_PORT=[your serial port]    (Ex.: 'COM1', '/dev/ttyS1', ...)
        DEV_MODEM_BAUD=[serial link speed]   (default is 19200)

    On most unix environments, this can be done running:

        DEV_MODEM_PORT=/dev/modem DEV_MODEM_BAUD=19200 make test

    On Win32 systems, you can do:

        set DEV_MODEM_PORT=COM1
        set DEV_MODEM_BAUD=19200
        nmake test (or make test)

skip 2
skip 3
skip 4
skip 5
skip 6
Installing /home/cpanrun/build/5.6.1/lib/site_perl/5.6.1/Device/Modem.pm
Installing /home/cpanrun/build/5.6.1/lib/site_perl/5.6.1/Device/Modem/UsRobotics.pm
Installing /home/cpanrun/build/5.6.1/lib/site_perl/5.6.1/Device/Modem/Log/Syslog.pm
Installing /home/cpanrun/build/5.6.1/lib/site_perl/5.6.1/Device/Modem/Log/File.pm
Installing /home/cpanrun/build/5.6.1/lib/site_perl/5.6.1/Device/Modem/Protocol/Xmodem.pm
Installing /home/cpanrun/build/5.6.1/man/man3/Device::Modem::UsRobotics.3
Installing /home/cpanrun/build/5.6.1/man/man3/Device::Modem::Protocol::Xmodem.3
Installing /home/cpanrun/build/5.6.1/man/man3/Device::Modem::Log::Syslog.3
Installing /home/cpanrun/build/5.6.1/man/man3/Device::Modem.3
Installing /home/cpanrun/build/5.6.1/man/man3/Device::Modem::Log::File.3
Appending installation info to /home/cpanrun/build/5.6.1/lib/5.6.1/i686-linux-thread-multi/perllocal.pod