Checking if your kit is complete...
Looks good
Writing Makefile for Devel::Required

Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.

cp lib/Devel/Required.pm blib\lib\Devel\Required.pm

Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.

	D:\cpanrun\build\5-6-1\bin\perl.exe -Mblib -Id:\cpanrun\build\5-6-1\lib -Id:\cpanrun\build\5-6-1\lib -e "use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;" t\Required01.t t\Required02.t
Using D:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Devel-Required/blib
t\Required01........1..37
ok 1 - use ExtUtils::MakeMaker;
ok 2 - use Devel::Required;
ok 3 - Devel::Required->can('import')
ok 4 - Failed to open Foo.pm: 
ok 5 - Failed to close Foo.pm: 
ok 6 - Check if Foo.pm exists
ok 7 - Failed to open Bar.pm: 
ok 8 - Failed to close Bar.pm: 
ok 9 - Check if Bar.pm exists
ok 10 - Failed to open Baz.pm: 
ok 11 - Failed to close Baz.pm: 
ok 12 - Check if Baz.pm exists
ok 13 - Failed to open README for writing: 
ok 14 - Failed to close README for writing: 
ok 15 - Check if README exists
Writing Makefile for Foo
Did not properly install "README"
# Looks like you planned 37 tests but only ran 15.
# Looks like your test died just after 15.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 16-37
	Failed 22/37 tests, 40.54% okay
t\Required02........1..21
ok 1 - Failed to open Foo.pm: 
ok 2 - Failed to close Foo.pm: 
ok 3 - Check if Foo.pm exists
ok 4 - Failed to open Bar.pm: 
ok 5 - Failed to close Bar.pm: 
ok 6 - Check if Bar.pm exists
ok 7 - Failed to open Baz.pm: 
ok 8 - Failed to close Baz.pm: 
ok 9 - Check if Baz.pm exists
ok 10 - Failed to open README for writing: 
ok 11 - Failed to close README for writing: 
ok 12 - Check if README exists
Writing Makefile for Foo
Did not properly install "README"
# Looks like you planned 21 tests but only ran 12.
# Looks like your test died just after 12.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 13-21
	Failed 9/21 tests, 57.14% okay
Failed Test    Status Wstat Total Fail  Failed  List of Failed
--------------------------------------------------------------------------------
t\Required01.t	 255 65280    37   22  59.46%  16-37
t\Required02.t	 255 65280    21    9  42.86%  13-21
Failed 2/2 test scripts, 0.00% okay. 31/58 subtests failed, 46.55% okay.
NMAKE : fatal error U1077: 'D:\cpanrun\build\5-6-1\bin\perl.exe' : return code '0x2'
Stop.
Checking if your kit is complete...
Looks good
Writing Makefile for Devel::Required

Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.

cp lib/Devel/Required.pm blib\lib\Devel\Required.pm

Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.

	D:\cpanrun\build\5-6-1\bin\perl.exe -Mblib -Id:\cpanrun\build\5-6-1\lib -Id:\cpanrun\build\5-6-1\lib -e "use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;" t\Required01.t t\Required02.t
Using D:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Devel-Required/blib
t\Required01........1..37
ok 1 - use ExtUtils::MakeMaker;
ok 2 - use Devel::Required;
ok 3 - Devel::Required->can('import')
ok 4 - Failed to open Foo.pm: 
ok 5 - Failed to close Foo.pm: 
ok 6 - Check if Foo.pm exists
ok 7 - Failed to open Bar.pm: 
ok 8 - Failed to close Bar.pm: 
ok 9 - Check if Bar.pm exists
ok 10 - Failed to open Baz.pm: 
ok 11 - Failed to close Baz.pm: 
ok 12 - Check if Baz.pm exists
ok 13 - Failed to open README for writing: 
ok 14 - Failed to close README for writing: 
ok 15 - Check if README exists
Writing Makefile for Foo
Did not properly install "README"
# Looks like you planned 37 tests but only ran 15.
# Looks like your test died just after 15.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 16-37
	Failed 22/37 tests, 40.54% okay
t\Required02........1..21
ok 1 - Failed to open Foo.pm: 
ok 2 - Failed to close Foo.pm: 
ok 3 - Check if Foo.pm exists
ok 4 - Failed to open Bar.pm: 
ok 5 - Failed to close Bar.pm: 
ok 6 - Check if Bar.pm exists
ok 7 - Failed to open Baz.pm: 
ok 8 - Failed to close Baz.pm: 
ok 9 - Check if Baz.pm exists
ok 10 - Failed to open README for writing: 
ok 11 - Failed to close README for writing: 
ok 12 - Check if README exists
Writing Makefile for Foo
Did not properly install "README"
# Looks like you planned 21 tests but only ran 12.
# Looks like your test died just after 12.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 13-21
	Failed 9/21 tests, 57.14% okay
Failed Test    Status Wstat Total Fail  Failed  List of Failed
--------------------------------------------------------------------------------
t\Required01.t	 255 65280    37   22  59.46%  16-37
t\Required02.t	 255 65280    21    9  42.86%  13-21
Failed 2/2 test scripts, 0.00% okay. 31/58 subtests failed, 46.55% okay.
NMAKE : fatal error U1077: 'D:\cpanrun\build\5-6-1\bin\perl.exe' : return code '0x2'
Stop.
Checking if your kit is complete...
Looks good
Writing Makefile for Devel::Required

Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.

cp lib/Devel/Required.pm blib\lib\Devel\Required.pm

Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.

	D:\cpanrun\build\5-6-1\bin\perl.exe -Mblib -Id:\cpanrun\build\5-6-1\lib -Id:\cpanrun\build\5-6-1\lib -e "use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;" t\Required01.t t\Required02.t
Using D:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Devel-Required/blib
t\Required01........1..37
ok 1 - use ExtUtils::MakeMaker;
ok 2 - use Devel::Required;
ok 3 - Devel::Required->can('import')
ok 4 - Failed to open Foo.pm: 
ok 5 - Failed to close Foo.pm: 
ok 6 - Check if Foo.pm exists
ok 7 - Failed to open Bar.pm: 
ok 8 - Failed to close Bar.pm: 
ok 9 - Check if Bar.pm exists
ok 10 - Failed to open Baz.pm: 
ok 11 - Failed to close Baz.pm: 
ok 12 - Check if Baz.pm exists
ok 13 - Failed to open README for writing: 
ok 14 - Failed to close README for writing: 
ok 15 - Check if README exists
Writing Makefile for Foo
Did not properly install "README"
# Looks like you planned 37 tests but only ran 15.
# Looks like your test died just after 15.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 16-37
	Failed 22/37 tests, 40.54% okay
t\Required02........1..21
ok 1 - Failed to open Foo.pm: 
ok 2 - Failed to close Foo.pm: 
ok 3 - Check if Foo.pm exists
ok 4 - Failed to open Bar.pm: 
ok 5 - Failed to close Bar.pm: 
ok 6 - Check if Bar.pm exists
ok 7 - Failed to open Baz.pm: 
ok 8 - Failed to close Baz.pm: 
ok 9 - Check if Baz.pm exists
ok 10 - Failed to open README for writing: 
ok 11 - Failed to close README for writing: 
ok 12 - Check if README exists
Writing Makefile for Foo
Did not properly install "README"
# Looks like you planned 21 tests but only ran 12.
# Looks like your test died just after 12.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 13-21
	Failed 9/21 tests, 57.14% okay
Failed Test    Status Wstat Total Fail  Failed  List of Failed
--------------------------------------------------------------------------------
t\Required01.t	 255 65280    37   22  59.46%  16-37
t\Required02.t	 255 65280    21    9  42.86%  13-21
Failed 2/2 test scripts, 0.00% okay. 31/58 subtests failed, 46.55% okay.
NMAKE : fatal error U1077: 'D:\cpanrun\build\5-6-1\bin\perl.exe' : return code '0x2'
Stop.