Please read ./INSTALL for hints on installing.

       Please read ./UPGRADE if you are upgrading.

Checking if your kit is complete...
Looks good
Writing Makefile for Envy
/home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl set_defaults.PL
 >>> set_defaults.PL running...
 >>> using DefaultConf.pm
Substituting envy.IN -> envy.pl
Substituting login.IN -> etc/login/dot.login
Substituting profile.IN -> etc/login/dot.profile
Substituting test.IN -> test.env
Substituting launche.IN -> launche
Substituting DB.IN -> DB.pm
Substituting wrapper.IN -> wrapper
 >>> Done!  New configuration written to ./Conf.pm <<<
cp etc/login/dot.shrc blib/etc/login/dot.shrc
cp etc/login/login.part2 blib/etc/login/login.part2
cp etc/login/bash.inputrc blib/etc/login/bash.inputrc
cp Conf.pm blib/lib/Envy/Conf.pm
cp UI.pm blib/lib/Envy/UI.pm
cp etc/login/dot.profile blib/etc/login/dot.profile
cp Load.pm blib/lib/Envy/Load.pm
cp etc/login/dot.login blib/etc/login/dot.login
cp Import.pm blib/lib/Envy/Import.pm
cp DB.pm blib/lib/Envy/DB.pm
cp DefaultConf.pm blib/lib/Envy/DefaultConf.pm
cp etc/login/profile.part2 blib/etc/login/profile.part2
cp etc/login/dot.cshrc blib/etc/login/dot.cshrc
cp etc/login/dot.dtprofile blib/etc/login/dot.dtprofile
cp envy.pl blib/script/envy.pl
/home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/envy.pl
cp launche blib/script/launche
/home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/launche
cp wrapper blib/script/wrapper
/home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/wrapper
cp envied blib/script/envied
/home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/envied
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/config......1..2
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 15:36:16 2007
# Current time GMT:   Fri Jun 29 22:36:16 2007
# Using Test.pm version 1.24
ok 1
ok 2
ok
t/db..........1..22
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 15:36:16 2007
# Current time GMT:   Fri Jun 29 22:36:16 2007
# Using Test.pm version 1.24
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok
t/envypath....1..9
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 15:36:17 2007
# Current time GMT:   Fri Jun 29 22:36:17 2007
# Using Test.pm version 1.24
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok
t/load........1..8
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 15:36:18 2007
# Current time GMT:   Fri Jun 29 22:36:18 2007
# Using Test.pm version 1.24
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/verylong....1..8
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 18:36:18 2007
# Current time GMT:   Fri Jun 29 22:36:18 2007
# Using Test.pm version 1.24
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/warn........1..5
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 15:36:19 2007
# Current time GMT:   Fri Jun 29 22:36:19 2007
# Using Test.pm version 1.24
ok 1
ok 2
ok 3
ok 4
ok 5
ok
All tests successful.
Files=6, Tests=54,  4 wallclock secs ( 3.38 cusr +  0.31 csys =  3.69 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Envy/Conf.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Envy/UI.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Envy/Load.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Envy/Import.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Envy/DB.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Envy/DefaultConf.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/bin/envy.pl
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/bin/launche
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/bin/wrapper
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/bin/envied
Warning: You do not have permissions to install into /etc at /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/ExtUtils/Install.pm line 114.
mkdir /etc/login: Permission denied at /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/ExtUtils/Install.pm line 176
make: *** [pure_site_install] Error 255