Checking if your kit is complete...
Looks good
Writing Makefile for File::SmartNL
cp lib/File/SmartNL.pm blib/lib/File/SmartNL.pm
cp lib/Docs/Site_SVD/File_SmartNL.pm blib/lib/Docs/Site_SVD/File_SmartNL.pm
Manifying blib/man3/File::SmartNL.3
Manifying blib/man3/Docs::Site_SVD::File_SmartNL.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/File/SmartNL.t
t/File/SmartNL....1..8
# Running under perl version 5.008002 for hpux
# Current time local: Fri Jun 29 08:07:24 2007
# Current time GMT:   Fri Jun 29 15:07:24 2007
# Using Test.pm version 1.24
# Test::Tech     : 1.25
# Data::Secs2    : 1.23
# Data::SecsPack : 0.08
# Data::Startup  : 0.06
# Number of tests: 8
# =cut 
ok 1 - UUT not loaded 
ok 2 - Load UUT 
ok 3 - fout Unix fin 
ok 4 - fout Dos Fin 
ok 5 - smart_nl 
ok 6 - read configuration 
ok 7 - write configuration 
ok 8 - verify write configuration 
# Passed : 8/8 100%
ok
All tests successful.
Files=1, Tests=8,  3 wallclock secs ( 2.52 cusr +  0.14 csys =  2.66 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/File/SmartNL.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Docs/Site_SVD/File_SmartNL.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/File::SmartNL.3
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Docs::Site_SVD::File_SmartNL.3
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod