Checking if your kit is complete... Looks good Writing Makefile for Geo::PostalCode cp lib/Geo/PostalCode/InstallDB.pm blib/lib/Geo/PostalCode/InstallDB.pm cp lib/Geo/PostalCode.pm blib/lib/Geo/PostalCode.pm Manifying blib/man3/Geo::PostalCode::InstallDB.3 Manifying blib/man3/Geo::PostalCode.3 PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_compile......# Failed test (t/00_compile.t at line 10) # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/arch /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # Compilation failed in require at (eval 1) line 2. # Failed test (t/00_compile.t at line 11) # Tried to use 'Geo::PostalCode::InstallDB'. # Error: Can't locate DB_File.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/arch /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode/InstallDB.pm line 37. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode/InstallDB.pm line 37. # Compilation failed in require at (eval 2) line 2. # Looks like you failed 2 tests of 2. 1..2 not ok 1 - use Geo::PostalCode; not ok 2 - use Geo::PostalCode::InstallDB; dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/01_installdb....1..2 Can't locate DB_File.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/arch /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. Compilation failed in require at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode/InstallDB.pm line 36. BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode/InstallDB.pm line 36. Compilation failed in require at t/01_installdb.t line 8. BEGIN failed--compilation aborted at t/01_installdb.t line 8. # Looks like your test died before it could output anything. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/02_basic........1..16 # Failed test (t/02_basic.t at line 14) # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/arch /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # Compilation failed in require at (eval 1) line 2. not ok 1 - use Geo::PostalCode; Can't locate object method "new" via package "Geo::PostalCode" at t/02_basic.t line 21. # Looks like you planned 16 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-16 Failed 16/16 tests, 0.00% okay t/03_polevault....1..20 # Failed test (t/03_polevault.t at line 11) # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/arch /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # Compilation failed in require at (eval 1) line 2. not ok 1 - use Geo::PostalCode; Can't locate object method "new" via package "Geo::PostalCode" at t/03_polevault.t line 29. # Looks like you planned 20 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-20 Failed 20/20 tests, 0.00% okay t/04_km...........1..9 # Failed test (t/04_km.t at line 8) # Tried to use 'Geo::PostalCode'. # Error: Can't locate DB_File.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/arch /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl . /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/PA-RISC1.1-thread-multi /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Geo-PostalCode/blib/lib/Geo/PostalCode.pm line 5. # Compilation failed in require at (eval 1) line 2. Can't locate object method "new" via package "Geo::PostalCode" at t/04_km.t line 24. not ok 1 - use Geo::PostalCode; # Looks like you planned 9 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-9 Failed 9/9 tests, 0.00% okay Failed 5/5 test scripts, 0.00% okay. 49/49 subtests failed, 0.00% okay. Failed Test Stat Wstat Total Fail Failed List of Failed --------------------------------------------------------------------------------------------------------------------------- t/00_compile.t 2 512 2 2 100.00% 1-2 t/01_installdb.t 2 512 2 4 200.00% 1-2 t/02_basic.t 255 65280 16 31 193.75% 1-16 t/03_polevault.t 255 65280 20 39 195.00% 1-20 t/04_km.t 255 65280 9 17 188.89% 1-9 make: *** [test_dynamic] Error 2