Checking if your kit is complete...
Looks good
Writing Makefile for Math::Polynomial::Solve
cp lib/Math/Polynomial/Solve.pm blib/lib/Math/Polynomial/Solve.pm
Manifying blib/man3/Math::Polynomial::Solve.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/cubic........1..18
ok 1 -    [ 1, 3, 3, 1 ]
ok 2 -    [ 1, 0, 0, -1 ]
ok 3 -    [ 1, 0, 0, 1 ]
ok 4 -    [ 1, -13, 59, -87 ]
ok 5 -    [ 1, -4, 4, -16 ]
ok 6 -    [ 1, -6, 11, -6 ]
ok 7 -    [ 1, 5, -62, -336 ]
ok 8 -    [ 8, -24, 0, 6.25 ]
ok 9 -    [ 1, -2.5, 0.875, -0.0625 ]
ok 10 -    [ -1, -3, -3, -1 ]
ok 11 -    [ -1, 0, 0, 1 ]
ok 12 -    [ -1, 0, 0, -1 ]
ok 13 -    [ -1, 13, -59, 87 ]
ok 14 -    [ -1, 4, -4, 16 ]
ok 15 -    [ -1, 6, -11, 6 ]
ok 16 -    [ -1, -5, 62, 336 ]
ok 17 -    [ -8, 24, 0, -6.25 ]
ok 18 -    [ -1, 2.5, -0.875, 0.0625 ]
ok
t/pod..........1..0 # Skip Test::Pod 1.00 required for testing POD
skipped
        all skipped: Test::Pod 1.00 required for testing POD
t/poly0........1..20
ok 1 -    [ 2, 1 ]
ok 2 -    [ 1, 2, 1 ]
ok 3 -    [ 1, 3, 3, 1 ]
ok 4 -    [ 1, 4, 6, 4, 1 ]
ok 5 -    [ 3, 6, -1, -4, 2 ]
ok 6 -    [ -3, -6, 1, 4, -2 ]
ok 7 -    [ 1, 0, -30, 0, 289 ]
ok 8 -    [ -1, 0, 30, 0, -289 ]
ok 9 -    [ 1, 0, -30, 0, 289, 0, 0, 0 ]
ok 10 -    [ 289, 0, -30, 0, 1 ]
ok 11 -    [ 2, 1 ]
ok 12 -    [ 1, 2, 1 ]
ok 13 -    [ 1, 3, 3, 1 ]
ok 14 -    [ 1, 4, 6, 4, 1 ]
ok 15 -    [ 3, 6, -1, -4, 2 ]
ok 16 -    [ -3, -6, 1, 4, -2 ]
ok 17 -    [ 1, 0, -30, 0, 289 ]
ok 18 -    [ -1, 0, 30, 0, -289 ]
ok 19 -    [ 1, 0, -30, 0, 289, 0, 0, 0 ]
ok 20 -    [ 289, 0, -30, 0, 1 ]
ok
t/poly1........1..8
ok 1 -    [ 1, 0, 0, 0, 0, -1 ]
ok 2 -    [ 1, 5, 10, 10, 5, 1 ]
ok 3 -    [ 1, 0, 0, 0, 1, 1 ]
ok 4 -    [ 1, 1, 1, 1, 1, 1, 1, 1 ]
ok 5 -    [ 1, 0, -3, -4, 3, 6, 2 ]
ok 6 -    [ -1, 0, 3, 4, -3, -6, -2 ]
ok 7 -    [ 4, -20, -7, 49, -70, 7, -53, 90 ]
ok 8 -    [ 1950773, 7551423, -1682934, 137445, -4961, 67 ]
ok
t/quadratic....1..14
ok 1 -    [ 1, 2, 1 ]
ok 2 -    [ 1, 0, -1 ]
ok 3 -    [ 1, 0, 1 ]
ok 4 -    [ 1, -3, 2 ]
ok 5 -    [ 1, 11, -6 ]
ok 6 -    [ 1, -7, 12 ]
ok 7 -    [ 1, -13, 12 ]
ok 8 -    [ -1, -2, -1 ]
ok 9 -    [ -1, 0, 1 ]
ok 10 -    [ -1, 0, -1 ]
ok 11 -    [ -1, 3, -2 ]
ok 12 -    [ -1, -11, 6 ]
ok 13 -    [ -1, 7, -12 ]
ok 14 -    [ -1, 13, -12 ]
ok
t/quartic......1..14
ok 1 -    [ 1, 4, 6, 4, 1 ]
ok 2 -    [ 1, 0, 0, 0, -1 ]
ok 3 -    [ 1, 0, 0, 0, 1 ]
ok 4 -    [ 1, -10, 35, -50, 24 ]
ok 5 -    [ 1, 6, -5, -10, -3 ]
ok 6 -    [ 1, 6, 7, -7, -12 ]
ok 7 -    [ 1, 6, -1, 4, 2 ]
ok 8 -    [ -1, -4, -6, -4, -1 ]
ok 9 -    [ -1, 0, 0, 0, 1 ]
ok 10 -    [ -1, 0, 0, 0, -1 ]
ok 11 -    [ -1, 10, -35, 50, -24 ]
ok 12 -    [ -1, -6, 5, 10, 3 ]
ok 13 -    [ -1, -6, -7, 7, 12 ]
ok 14 -    [ -1, -6, 1, -4, -2 ]
ok
All tests successful, 1 test skipped.
Files=6, Tests=74,  8 wallclock secs ( 7.87 cusr +  0.34 csys =  8.21 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Math/Polynomial/Solve.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Math::Polynomial::Solve.3
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod