Checking if your kit is complete... Looks good Writing Makefile for Proc::Command cp lib/Proc/Command.pm blib/lib/Proc/Command.pm cp lib/Docs/Site_SVD/Proc_Command.pm blib/lib/Docs/Site_SVD/Proc_Command.pm Manifying blib/man3/Proc::Command.3 Manifying blib/man3/Docs::Site_SVD::Proc_Command.3 PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/Proc/Command.t t/Proc/Command....1..3 # Running under perl version 5.008002 for hpux # Current time local: Sun Jul 1 20:14:51 2007 # Current time GMT: Mon Jul 2 03:14:51 2007 # Using Test.pm version 1.24 # Number Storage: number # Test::Tech : 1.11 # Data::Dumper : 2.121 # =cut # UUT not loaded ok 1 # Load UUT ok 2 # echo a line ok 3 ok All tests successful. Files=1, Tests=3, 1 wallclock secs ( 1.05 cusr + 0.14 csys = 1.19 CPU) Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Proc/Command.pm Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Docs/Site_SVD/Proc_Command.pm Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Proc::Command.3 Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Docs::Site_SVD::Proc_Command.3 Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod