Checking if your kit is complete...
Looks good
Writing Makefile for Text::Replace
cp lib/Docs/Site_SVD/Text_Replace.pm blib/lib/Docs/Site_SVD/Text_Replace.pm
cp lib/Text/Replace.pm blib/lib/Text/Replace.pm
Manifying blib/man3/Docs::Site_SVD::Text_Replace.3
Manifying blib/man3/Text::Replace.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/Text/Replace.t
t/Text/Replace....1..3
# Running under perl version 5.008002 for hpux
# Current time local: Tue Jul  3 19:36:29 2007
# Current time GMT:   Wed Jul  4 02:36:29 2007
# Using Test.pm version 1.24
# Test::Tech    : 1.24
# Data::Secs2   : 1.22
# Data::SecsPack: 0.07
# Data::Startup : 0.06
# =cut 
ok 1 - UUT not loaded 
ok 2 - Load UUT 
ok 3 - replace variables 
# Passed : 3/3 100%
ok
All tests successful.
Files=1, Tests=3,  2 wallclock secs ( 2.38 cusr +  0.13 csys =  2.51 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Text/Replace.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Docs/Site_SVD/Text_Replace.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Docs::Site_SVD::Text_Replace.3
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Text::Replace.3
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod