Checking if your kit is complete...
Looks good
Writing Makefile for Thread::Barrier
cp Barrier.pm blib/lib/Thread/Barrier.pm
Manifying blib/man3/Thread::Barrier.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/init....1..6
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok
t/load....1..1
ok 1 - use Thread::Barrier;
ok
t/wait....1..12
ok 1 - cascade test
ok 2 - iterative test
ok 3 - counter reset
ok 4 - wait on zero-threshold barrier
ok 5 - wait on zero-threshold barrier
ok 6 - wait on zero-threshold barrier
ok 7 - wait on zero-threshold barrier
ok 8 - wait on zero-threshold barrier
ok 9 - wait on zero-threshold barrier
ok 10 - wait on zero-threshold barrier
ok 11 - wait on zero-threshold barrier
ok 12 - wait serial return value
ok
All tests successful.
Files=3, Tests=19, 23 wallclock secs (22.36 cusr +  0.30 csys = 22.66 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Thread/Barrier.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Thread::Barrier.3
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod