WARNING: LICENSE is not a known parameter.
Can't load ExtUtils::MakeMaker::Coverage, not adding testcover target
Checking if your kit is complete...
Looks good
'LICENSE' is not a known MakeMaker parameter name.
Writing Makefile for Tie::Cycle::Sinewave
cp Sinewave.pm blib/lib/Tie/Cycle/Sinewave.pm
Manifying blib/man3/Tie::Cycle::Sinewave.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-load......# testing Tie::Cycle::Sinewave 0.05
1..1
ok 1 - use Tie::Cycle::Sinewave;
ok
t/01-basic.....1..31
ok 1 - we have a T::C::S object
ok 2 - max start 50
ok 3 - min is -50
ok 4 - min is -50, set to -20
ok 5 - min is -20
ok 6 - max is  50
ok 7 - max is 50, set to 100
ok 8 - max is  100
ok 9 - period is 16
ok 10 - period is 16, set to 20
ok 11 - period is 20
ok 12 - swap min is -50
ok 13 - swap max is  50
ok 14 - max is 50, set to -100
ok 15 - now swap min is -100
ok 16 - now swap max is  -50
ok 17 - min start -100
ok 18 - not yet past max
ok 19 - but past min
ok 20 - now past max
ok 21 - not yet past min
ok 22 - but past max
ok 23 - now past min
ok 24 - back to where we started
ok 25 - angle check
ok 26 - at_min not defined for garbage
ok 27 - at_max not defined for garbage
ok 28 - STORE check
ok 29 - zero-length period changed to 1
ok 30 - period is 1, set to 0
ok 31 - zero-length period changed to 1 again
ok
t/99-author....1..0 # Skip PERL_AUTHOR_TESTING environment variable not set (or zero)
skipped
        all skipped: PERL_AUTHOR_TESTING environment variable not set (or zero)
All tests successful, 1 test skipped.
Files=3, Tests=32,  3 wallclock secs ( 2.35 cusr +  0.16 csys =  2.51 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Tie/Cycle/Sinewave.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Tie::Cycle::Sinewave.3
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod