Checking if your kit is complete...
Looks good
Writing Makefile for CGI::okSession
cp okSession.pm blib/lib/CGI/okSession.pm
Manifying blib/man3/CGI::okSession.3
PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/1-create.....1..7
ok 1 - use CGI::okSession;
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/2-check......1..13
ok 1 - use CGI::okSession;
ok 2 - test 2
ok 3 - test 3
ok 4 - test 3
ok 5 - test 3
ok 6 - test 3
ok 7 - test 3
ok 8 - test 3
ok 9 - test 3
ok 10 - test 3
ok 11 - test 3
ok 12 - test 3
ok 13 - test 3
ok
t/3-expired....1..4
ok 1 - use CGI::okSession;
ok 2 - Session test
ok 3 - expire_www test
ok 4 - Expired session test
ok
t/4-get_id.....1..3
ok 1 - use CGI::okSession;
ok 2 - Session test
ok 3 - get_ID test
ok
All tests successful.
Files=4, Tests=27,  8 wallclock secs ( 1.56 cusr +  0.26 csys =  1.82 CPU)
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/CGI/okSession.pm
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/CGI::okSession.3
Appending installation info to /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64/perllocal.pod