Checking if your kit is complete...
Looks good
Writing Makefile for DateTime::Set
cp lib/Set/Infinite/_recurrence.pm blib/lib/Set/Infinite/_recurrence.pm
cp lib/DateTime/Set.pm blib/lib/DateTime/Set.pm
cp lib/DateTime/Span.pm blib/lib/DateTime/Span.pm
cp lib/DateTime/SpanSet.pm blib/lib/DateTime/SpanSet.pm
Manifying blib/man3/Set::Infinite::_recurrence.3
Manifying blib/man3/DateTime::Set.3
Manifying blib/man3/DateTime::Span.3
Manifying blib/man3/DateTime::SpanSet.3
PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00load.....................1..1
ok 1 - use DateTime::Set;
ok
t/01sanity...................1..7
ok 1 - got 1810-11-22 and 1900-11-22 - DateTime
ok 2 - got 1810-11-22 and 1900-11-22 - as_list
ok 3 - got 1810-11-22 - min
ok 4 - got 1900-11-22 - max
ok 5 - Cannot call from_datetimes without dates parameter
ok 6 - empty set ->min should be undef
ok 7 - empty set ->max should be undef
ok
t/02immutable................1..11
ok 1 - got 1810-11-22 - min
ok 2 - change object to 1810-11-25
ok 3 - still getting 1810-11-22 - after changing original object
ok 4 - changing object time zone in place
ok 5 - changing object hour in place
ok 6 - The object isa DateTime::Set
ok 7 - map
ok 8 - map does not mutate set
ok 9 - The object isa DateTime::Set
ok 10 - grep
ok 11 - grep does not mutate set
ok
t/03add_subtract.............1..6
ok 1 - count
ok 2 - got 1811-11-22 - min
ok 3 - got 1811-12-22 - min
ok 4 - got 1811-11-22 - min
ok 5 - got 1810-11-22 - min
ok 6 - got 1811-12-22 - min
ok
t/04recurrence...............1..25
ok 1 - does not contain datetime
ok 2 - does not contain datetime list
ok 3 - contains datetime
ok 4 - does not intersect datetime
ok 5 - intersects datetime list
ok 6 - intersects datetime
ok 7 - contains - can't do it with both unbounded sets, returns undef
ok 8 - intersects unbounded set
ok 9 - does not contain datetime
ok 10 - does not contain datetime list
ok 11 - contains datetime
ok 12 - does not intersect datetime
ok 13 - intersects datetime list
ok 14 - intersects datetime
ok 15 - min()
ok 16 - max()
ok 17 - min()
ok 18 - max()
ok 19 - count
ok 20 - min()
ok 21 - max()
ok 22 - min()
ok 23 - max()
ok 24 - intersection at the recurrence
ok 25 - too many elements - iterate
ok
t/05iterator.................1..8
ok 1 - min() - got 1810-09-01
ok 2 - 3 iterations give 1810-09-01 1810-10-01 1810-11-01
ok 3 - 3 iterations give 1810-08-22T00:00:00.000000 1810-08-22T00:00:00.000001 1810-08-22T00:00:00.000002
ok 4 - limited iterator give 1810-09-01 1810-10-01 1810-11-01
ok 5 - limited iterator give 1810-09-01 1810-10-01 1810-11-01
ok 6 - limited iterator give 1810-09-01 1810-10-01 1810-11-01 1810-12-01
ok 7 - limited iterator give 1810-08-22,1810-09-01 1810-09-01,1810-10-01 1810-10-01,1810-11-01 1810-11-01,1810-11-24
ok 8 - limited iterator give 1810-11-01,1810-11-24 1810-10-01,1810-11-01 1810-09-01,1810-10-01 1810-08-22,1810-09-01
ok
t/06backtrack................1..7
ok 1 - months
ok 2 - recurr day 15
ok 3 - union of recurrences: recurr day 1,15
ok 4 - days_15
ok 5 - months is still there
ok 6 - days_20
ok 7 - days_15_and_20
ok
t/07previous.................1..7
ok 1 - months
ok 2 - recurr day 15
ok 3 - union of recurrences: recurr day 1,15
ok 4 - days_15
ok 5 - months is still there
ok 6 - days_20
ok 7 - days_15_and_20
ok
t/08span.....................1..7
ok 1 - got 1810-11-22T00:00:00 - min
ok 2 - got 1810-11-22T02:00:00 - max
ok 3 - Span should contain datetime in between start and end
ok 4 - union of spans gives a spanset isa DateTime::SpanSet
ok 5 - infinite start
ok 6 - infinite end
ok 7 - infinite duration
ok
t/09spanset..................1..53
ok 1 - got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 2 - got 1812-11-22T00:00:00..1813-12-23T00:00:00
ok 3 - got ---..1810-09-20T00:00:00
ok 4 - got 1811-10-21T00:00:00..1812-11-22T00:00:00
ok 5 - got 1813-12-23T00:00:00..++
ok 6 - The object isa DateTime::Span
ok 7 - as_list got ---..1810-09-20T00:00:00
ok 8 - intersected got 1811-10-21T00:00:00..1812-11-22T00:00:00
ok 9 - next dt got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 10 - end is open
ok 11 - start is closed
ok 12 - next span got 1812-11-22T00:00:00..1813-12-23T00:00:00
ok 13 - end is open
ok 14 - start is closed
ok 15 - previous dt got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 16 - current dt got 1812-11-22T00:00:00..1813-12-23T00:00:00
ok 17 - closest dt got 1812-11-22T00:00:00..1813-12-23T00:00:00
ok 18 - closest dt got 1812-11-22T00:00:00..1813-12-23T00:00:00
ok 19 - closest dt got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 20 - previous dt got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 21 - end is open
ok 22 - start is closed
ok 23 - no previous
ok 24 - spanset size is infinite
ok 25 - got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 26 - got 1811-10-21T00:00:00..1812-11-22T00:00:00
ok 27 - got ---..1810-09-20T00:00:00
ok 28 - got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 29 - got 1811-10-21T00:00:00..1812-11-22T00:00:00
ok 30 - got 1812-11-22T00:00:00..1813-12-23T00:00:00
ok 31 - got 1813-12-23T00:00:00..++
ok 32 - recurrence works properly - got 1810-09-20T00:00:00
ok 33 - recurrence works properly - got 1810-09-21T00:00:00
ok 34 - start_set == end_set recurrence works properly - got ---..1810-09-20T00:00:00
ok 35 - start_set == end_set recurrence works properly - got 1810-09-20T00:00:00..1810-09-21T00:00:00
ok 36 - start_set == end_set recurrence works properly - got 1810-09-21T00:00:00..1810-09-22T00:00:00
ok 37 - start_set == end_set recurrence works properly - got 1810-09-20T00:00:00..1810-09-20T01:00:00
ok 38 - start_set == end_set recurrence works properly - got 1810-09-21T00:00:00..1810-09-21T01:00:00
ok 39 - limited iterator got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 40 - other limited iterator got 1810-09-20T00:00:00..1811-10-21T00:00:00
ok 41 - limited iterator works properly
ok 42 - limited iterator doesn't break regular iterator
ok 43 - start_set isa DateTime::Set
ok 44 - end_set isa DateTime::Set
ok 45 - start_set
ok 46 - end_set
ok 47 - next span_set occurrence - got 1810-09-21T00:00:00..1810-09-21T01:00:00
ok 48 - next span_set-start occurrence - got 1810-09-21T00:00:00
ok 49 - next span_set-end occurrence - got 1810-09-21T01:00:00
ok 50 - span_set recurrence does not contain
ok 51 - span_set recurrence contains, dt == start
ok 52 - span_set recurrence does not contain, dt == end
ok 53 - span_set recurrence does not intersect, dt == end
ok
t/10previous-2...............1..4
ok 1 - previous day is 2000-10-02
ok 2 - previous day is 2000-10-01
ok 3 - previous day is 2000-10-02
ok 4 - previous day is 2000-10-01
ok
t/11next.....................1..4
ok 1 - next day is 2000-10-02
ok 2 - next day is 2000-10-03
ok 3 - next day is 2000-10-02
ok 4 - next day is 2000-10-03
ok
t/12iterator_intersection....1..4
ok 1 - iterations of month1 give 1810-09-15 1810-10-15 1810-11-15 1810-12-15 1811-01-15
ok 2 - iterations of month2 give 1810-12-16 1811-01-16 1811-02-13 1811-03-16 1811-04-15
ok 3 - min() - got 1811-04-15
ok 4 - 3 iterations give 1811-04-15 1811-06-15 1811-09-15
ok
t/13add_recurrence...........1..8
ok 1 - min() - got 1810-09-01
ok 2 - min() - got 1810-09-01T01:00:00
ok 3 - span intersection, add - got 1810-09-01T01:00:00
ok 4 - span intersection, subtract - got 1810-09-30T23:00:00
ok 5 - min() - got 1810-09-01
ok 6 - min() - got 1810-09-01T01:00:00
ok 7 - min() - got 1810-09-01T00:00:00
ok 8 - max() - got 1810-09-01T01:00:00
ok
t/14complement...............1..4
ok 1 - min() - got 1810-09-01
ok 2 - min() - got 1810-10-01
ok 3 - min() - got 1810-10-01
ok 4 - min() - got 1810-11-01
ok
t/15time_zone................1..14
ok 1 - got 2001-11-22T00:00:00 - min
ok 2 - got time zone name from set
ok 3 - got 2001-11-22T10:00:00 - min
ok 4 - got 2002-11-22T10:00:00 - max
ok 5 - got 2001-11-22T00:00:00 - min
ok 6 - got 2002-11-22T00:00:00 - max
ok 7 - recurrence with time zone
ok 8 - does not mutate arg
ok 9 - recurrence without time zone, arg without time zone
ok 10 - recurrence with time zone, arg without time zone
ok 11 - recurrence with time zone, arg without time zone
ok 12 - recurrence with time zone, arg with time zone
ok 13 - default locale
ok 14 - new locale
ok
t/16bounded_recurrence.......1..17
ok 1 - does not contain datetime
ok 2 - does not contain datetime list
ok 3 - contains datetime
ok 4 - does not intersect datetime
ok 5 - intersects datetime list
ok 6 - intersects datetime
ok 7 - min()
ok 8 - max()
ok 9 - min()
ok 10 - max()
ok 11 - count
ok 12 - min()
ok 13 - max()
ok 14 - count
ok 15 - min()
ok 16 - max()
ok 17 - count
ok
t/17quantize.................1..1
ok 1 - spanset was quantized to a set
ok
t/18as_list_empty............1..8
ok 1 - Infinite date set - as_list - returns a single, "undef" element, as documented
ok 2 - Infinite date set - as_list - the element is undef
ok 3 - Infinite date set - count is undef
ok 4 - Single date set - as_list
ok 5 - Single date set - count is 1
ok 6 - Out of range / empty set - as_list returns an empty list
ok 7 - Out of range / empty set - as_list stringifies as an empty string
ok 8 - Out of range / empty set - count is zero
ok
All tests successful.
Files=19, Tests=196, 84 wallclock secs (80.85 cusr +  2.91 csys = 83.76 CPU)
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/DateTime/Set.pm
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/DateTime/Span.pm
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/DateTime/SpanSet.pm
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/Set/Infinite/_recurrence.pm
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/Set::Infinite::_recurrence.3
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/DateTime::Set.3
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/DateTime::Span.3
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/DateTime::SpanSet.3
Appending installation info to /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64/perllocal.pod