Warning: prerequisite IO::String 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Email::Simple::FromHandle cp lib/Email/Simple/FromHandle.pm blib/lib/Email/Simple/FromHandle.pm Manifying blib/man3/Email::Simple::FromHandle.3 PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/fold............1..6 # Failed test (t/fold.t at line 8) # Tried to use 'Email::Simple::FromHandle'. # Error: Can't locate IO/String.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/inc /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib/Email/Simple/FromHandle.pm line 44. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib/Email/Simple/FromHandle.pm line 44. # Compilation failed in require at (eval 1) line 2. not ok 1 - use Email::Simple::FromHandle; ok 2 - The object isa Email::Simple ok 3 - The object isa Email::Simple::FromHandle # Failed test (t/fold.t at line 19) not ok 4 - References header checks out # got: undef # expected: '<200211120937.JAA28130@xoneweb.opengroup.org> <1021112125524.ZM7503@skye.rdg.opengroup.org> <3DD221BB.13116D47@sun.com>' # Failed test (t/fold.t at line 22) # got: undef # expected: '<200211120937.JAA28130@xoneweb.opengroup.org> <1021112125524.ZM7503@skye.rdg.opengroup.org> <3DD221BB.13116D47@sun.com>' not ok 5 - References header checks out with case folding # Failed test (t/fold.t at line 25) not ok 6 - And the received headers are folded gracefully, and multiple headers work # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = 'from mailman.opengroup.org ([192.153.166.9]) by deep-dark-truthful-mirror.pad with smtp (Exim 3.36 #1 (Debian)) id 18Buh5-0006Zr-00 for ; Wed, 13 Nov 2002 10:24:23 +0000' # Looks like you failed 4 tests of 6. dubious Test returned status 4 (wstat 1024, 0x400) DIED. FAILED tests 1, 4-6 Failed 4/6 tests, 33.33% okay t/handle..........1..11 # Failed test (t/handle.t at line 9) # Tried to use 'Email::Simple::FromHandle'. # Error: Can't locate IO/String.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/inc /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib/Email/Simple/FromHandle.pm line 44. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib/Email/Simple/FromHandle.pm line 44. # Compilation failed in require at (eval 1) line 2. not ok 1 - use Email::Simple::FromHandle; ok 2 - The object isa Email::Simple ok 3 - The object isa Email::Simple::FromHandle # Failed test (t/handle.t at line 19) not ok 4 - correct From: # undef # doesn't match '(?-xism:Business People)' Can't locate object method "reset_handle" via package "Email::Simple::FromHandle" at t/handle.t line 21. # Looks like you planned 11 tests but only ran 4. # Looks like your test died just after 4. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1, 4-11 Failed 9/11 tests, 18.18% okay t/nofold..........1..10 # Failed test (t/nofold.t at line 9) # Tried to use 'Email::Simple::FromHandle'. # Error: Can't locate IO/String.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/inc /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl .) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib/Email/Simple/FromHandle.pm line 44. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Email-Simple-FromHandle/blib/lib/Email/Simple/FromHandle.pm line 44. # Compilation failed in require at (eval 1) line 2. not ok 1 - use Email::Simple::FromHandle; ok 2 - The object isa Email::Simple ok 3 - The object isa Email::Simple::FromHandle # Failed test (t/nofold.t at line 19) not ok 4 - Andrew's in the header # undef # doesn't match '(?-xism:Andrew)' # Failed test (t/nofold.t at line 22) not ok 5 - We can get a header # got: undef # expected: 'Andrew Josey ' ok 6 - Setting returns new value ok 7 - Which is consistently returned # Failed test (t/nofold.t at line 33) not ok 8 - Body has sane stuff in it # '' # doesn't match '(?-xism:Austin Group Chair)' ok 9 - Body can be set properly # Failed test (t/nofold.t at line 41) not ok 10 - Good grief, it's round-trippable # got: ' # ' # expected: 'Received: (qmail 1679 invoked by uid 503); 13 Nov 2002 10:10:49 -0000 # Resent-Date: 13 Nov 2002 10:10:49 -0000 # Date: Wed, 13 Nov 2002 10:06:51 GMT # From: Andrew Josey # Message-Id: <1021113100650.ZM12997@skye.rdg.opengroup.org> # In-Reply-To: Joanna Farley's message as of Nov 13, 9:56am. # X-Mailer: Z-Mail (5.0.0 30July97) # To: austin-group-l@opengroup.org # Subject: Re: Defect in XBD lround # MIME-Version: 1.0 # Resent-Message-ID: # Resent-To: austin-group-l@opengroup.org # Resent-From: austin-group-l@opengroup.org # X-Mailing-List: austin-group-l:archive/latest/4823 # X-Loop: austin-group-l@opengroup.org # Precedence: list # Resent-Sender: austin-group-l-request@opengroup.org # Content-Type: text/plain; charset=us-ascii # # Joanna, All # # Thanks. I got the following response from Fred Tydeman. # # C99 Defect Report (DR) 240 covers this. The main body of C99 # (7.12.9.7) says range error, while Annex F (F.9.6.7 and F.9.6.5) # says "invalid" (domain error). The result was to change 7.12.9.7 # to allow for either range or domain error. The preferred error # is domain error (so as match Annex F). So, no need to change XBD. # # regards # Andrew # # On Nov 13, 9:56am in "Re: Defect in XBD lr", Joanna Farley wrote: # > Sun's expert in this area after some discussions with a colleague # > outside of Sun concluded that for lround, to align with both C99 and SUS # > changes of the following form were necessary: # > # > + If x is +/-Inf/NaN, a domain error occurs, and # > + errno is set to EDOM in MATH_ERRNO mode; # > + the invalid exception is raised in MATH_ERREXCEPT mode. # > [to align with C99 Annex F.4] # > # > + If x is too large to be represented as a long, a *range* error # > may occur, and # > + errno *may be* set to ERANGE in MATH_ERRNO mode; # > [to align with C99 7.12.9.7] # > + the invalid exception *is* raised in MATH_ERREXCEPT mode. # > [to align with C99 Annex F.4] # > # > They believe it is a bit awkward to have errno set to ERANGE in # > MATH_ERRNO mode yet the invalid exception raised in MAH_ERREXCEPT mode, # > but that just reflects an imperfect mapping of the C notion of errno to # > the IEEE 754 notion of data conversion. # > # > I'll work with our expert to draft text refecting the above to suggest # > replacement text for lines 23678-23684 on lround page 721 of XSH6. # > # > Thanks # > # > Joanna # > # > # > Andrew Josey wrote: # > > # > > The text referred to is MX shaded and part of the ISO 60559 floating # > > point option. I do not think changing the Domain Error to a Range Error # > > is the fix or at least not the fix for the NaN and +-Inf cases. ISO C # > > 99 describes the range error case if the magnitude of x is too large as a # > > may fail. I'll ask Fred T for his thoughts on this one... # > > regards # > > Andrew # > > # > > On Nov 12, 9:37am in "Defect in XBD lround", Erwin.Unruh@fujitsu-siemens.com wrote: # > > > Defect report from : Erwin Unruh , Fujitsu Siemens Computers # > > > # > > > (Please direct followup comments direct to austin-group-l@opengroup.org) # > > > # > > > @ page 0 line 0 section lround objection {0} # > > > # > > > Problem: # > > > # > > > Defect code : 1. Error # > > > # > > > The function lround is described in http://www.opengroup.org/onlinepubs/007904975/functions/lround.html # > > > On Error it is specified that errno has to be set to EDOM. However, the C99 standard ISO/IEC 9899:1999 (E) specifies this as a range error, which would result in a value of ERANGE. So an implementation could not be conformant to both these standards. # > > > # > > > Action: # > > > # > > > Change the value of errno to ERANGE, if the result is not represantable. More specific: In the description of the function, replace all occurences of "domain error" with "range error" and replace "EDOM" with "ERANGE" # > > >-- End of excerpt from Erwin.Unruh@fujitsu-siemens.com # > > # # ----- # Andrew Josey The Open Group # Austin Group Chair Apex Plaza,Forbury Road, # Email: a.josey@opengroup.org Reading,Berks.RG1 1AX,England # Tel: +44 118 9508311 ext 2250 Fax: +44 118 9500110 # ' # Looks like you failed 5 tests of 10. dubious Test returned status 5 (wstat 1280, 0x500) DIED. FAILED tests 1, 4-5, 8, 10 Failed 5/10 tests, 50.00% okay t/pod-coverage....1..0 # Skip Test::Pod::Coverage 1.08 required for testing POD coverage skipped all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.............1..1 ok 1 - blib/lib/Email/Simple/FromHandle.pm ok Failed 3/5 test scripts, 40.00% okay. 18/28 subtests failed, 35.71% okay. Failed Test Stat Wstat Total Fail Failed List of Failed -------------------------------------------------------------------------------------------------------------------------------------------------------- t/fold.t 4 1024 6 4 66.67% 1 4-6 t/handle.t 255 65280 11 16 145.45% 1 4-11 t/nofold.t 5 1280 10 5 50.00% 1 4-5 8 10 1 test skipped. make: *** [test_dynamic] Error 25