Checking if your kit is complete... Looks good Writing Makefile for GameClock cp lib/GclkData.pm blib/lib/GclkData.pm cp lib/GclkSettings.pm blib/lib/GclkSettings.pm cp lib/GclkCounter.pm blib/lib/GclkCounter.pm cp lib/GameClock.pm blib/lib/GameClock.pm cp lib/GclkDisplay.pm blib/lib/GclkDisplay.pm Manifying blib/man3/GclkSettings.3 Manifying blib/man3/GclkData.3 Manifying blib/man3/GclkCounter.3 Manifying blib/man3/GameClock.3 Manifying blib/man3/GclkDisplay.3 PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load.........1..5 # Failed test (t/00-load.t at line 6) # Tried to use 'GameClock'. # Error: Can't locate Chess/GameClock/GclkData.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GameClock.pm line 17. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GameClock.pm line 17. # Compilation failed in require at (eval 1) line 2. not ok 1 - use GameClock; # Failed test (t/00-load.t at line 7) not ok 2 - use GclkCounter; # Tried to use 'GclkCounter'. # Error: Can't locate Chess/GameClock/GclkData.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GclkCounter.pm line 23. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GclkCounter.pm line 23. # Compilation failed in require at (eval 2) line 2. ok 3 - use GclkData; # Failed test (t/00-load.t at line 9) not ok 4 - use GclkDisplay; # Tried to use 'GclkDisplay'. # Error: Can't locate Chess/GameClock/GclkData.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GclkDisplay.pm line 18. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GclkDisplay.pm line 18. # Compilation failed in require at (eval 10) line 2. # Failed test (t/00-load.t at line 10) not ok 5 - use GclkSettings; # Tried to use 'GclkSettings'. # Error: Can't locate Chess/GameClock/GclkData.pm in @INC (@INC contains: /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/arch /home/cpanrun/depot/main/Apps/CPAN_Run/lib /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl . /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/PA-RISC2.0-thread-multi-LP64 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2 /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl) at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GclkSettings.pm line 22. # BEGIN failed--compilation aborted at /home/cpanrun/depot/main/contrib-patched/perl/CPAN/src/GameClock/blib/lib/GclkSettings.pm line 22. # Compilation failed in require at (eval 11) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 13. # Testing GameClock , Perl 5.008002, /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl # Looks like you failed 4 tests of 5. dubious Test returned status 4 (wstat 1024, 0x400) DIED. FAILED tests 1-2, 4-5 Failed 4/5 tests, 20.00% okay t/boilerplate.....1..7 ok 1 - README contains no boilerplate text ok 2 - Changes contains no boilerplate text couldn't open lib\GameClock.pm for reading: No such file or directory at t/boilerplate.t line 9. # Looks like you planned 7 tests but only ran 2. # Looks like your test died just after 2. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 3-7 Failed 5/7 tests, 28.57% okay t/pod-coverage....1..0 # Skip Test::Pod::Coverage 1.04 required for testing POD coverage skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............1..0 # Skip Test::Pod 1.14 required for testing POD skipped all skipped: Test::Pod 1.14 required for testing POD Failed 2/4 test scripts, 50.00% okay. 9/12 subtests failed, 25.00% okay. Failed Test Stat Wstat Total Fail Failed List of Failed -------------------------------------------------------------------------------------------------------------------------------------------------------- t/00-load.t 4 1024 5 4 80.00% 1-2 4-5 t/boilerplate.t 255 65280 7 10 142.86% 3-7 2 tests skipped. make: *** [test_dynamic] Error 25