Checking if your kit is complete...
Looks good
Writing Makefile for IO::File::Log
cp Log.pm blib/lib/IO/File/Log.pm
Manifying blib/man3/IO::File::Log.3
PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/basic......1..1
ok 1
ok
t/grow.......1..23
ok 1 - new()
ok 2 - Correct type
ok 3 - Read of 1
ok 4 - Read of 2
ok 5 - Read of 3
ok 6 - Read of 4
ok 7 - Read of 5
ok 8 - Read of 6
ok 9 - Read of 7
ok 10 - Read of 8
ok 11 - Read of 9
ok 12 - Read of 10
ok 13 - Seek to begining of log
ok 14 - 2nd Read of 1
ok 15 - 2nd Read of 2
ok 16 - 2nd Read of 3
ok 17 - 2nd Read of 4
ok 18 - 2nd Read of 5
ok 19 - 2nd Read of 6
ok 20 - 2nd Read of 7
ok 21 - 2nd Read of 8
ok 22 - 2nd Read of 9
ok 23 - 2nd Read of 10
ok
t/rotate.....1..22
ok 1 - new()
ok 2 - Correct type
ok 3 - Read of 1
ok 4 - Read of 1
ok 5 - Read of 2
ok 6 - Read of 2
ok 7 - Read of 3
ok 8 - Read of 3
ok 9 - Read of 4
ok 10 - Read of 4
ok 11 - Read of 5
ok 12 - Read of 5
ok 13 - Read of 6
ok 14 - Read of 6
ok 15 - Read of 7
ok 16 - Read of 7
ok 17 - Read of 8
ok 18 - Read of 8
ok 19 - Read of 9
ok 20 - Read of 9
ok 21 - Read of 10
ok 22 - Read of 10
ok
t/sgrow......1..22
ok 1 - new()
ok 2 - Correct type
ok 3 - Number of lines for 1
ok 4 - Data read for 1
ok 5 - Number of lines for 2
ok 6 - Data read for 2
ok 7 - Number of lines for 3
ok 8 - Data read for 3
ok 9 - Number of lines for 4
ok 10 - Data read for 4
ok 11 - Number of lines for 5
ok 12 - Data read for 5
ok 13 - Number of lines for 6
ok 14 - Data read for 6
ok 15 - Number of lines for 7
ok 16 - Data read for 7
ok 17 - Number of lines for 8
ok 18 - Data read for 8
ok 19 - Number of lines for 9
ok 20 - Data read for 9
ok 21 - Number of lines for 10
ok 22 - Data read for 10
ok
t/srotate....1..4
ok 1 - new()
ok 2 - Correct type
ok 3 - Before slow rotation
make: *** [test_dynamic] Hangup