Checking if your kit is complete... Looks good Writing Makefile for Net::IP::Match cp Match.pm blib/lib/Net/IP/Match.pm cp match_ip_bench.pl blib/lib/Net/IP/match_ip_bench.pl Manifying blib/man3/Net::IP::Match.3 Manifying blib/man3/Net::IP::match_ip_bench.3 PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..22 ok 1 - use Net::IP::Match; ok 2 - 10.0.1.38 ok 3 - 12.220.206.11 ok 4 - 12.225.186.217 ok 5 - 87.134.66.127 ok 6 - 87.134.66.128 ok 7 - 87.134.86.26 ok 8 - 87.134.87.26 ok 9 - 128.101.91.70 ok 10 - 128.105.2.10 ok 11 - 128.252.19.2 ok 12 - 132.185.132.11 ok 13 - 137.158.128.1 ok 14 - 145.97.1.6 ok 15 - 145.97.11.1 ok 16 - 145.97.200.63 ok 17 - 145.974.216.202 ok 18 - 192.100.59.100 ok 19 - 192.168.0.0 ok 20 - two strings that match ok 21 - two strings that do not match ok 22 - complex condition Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/Net/IP/Match.pm Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/Net/IP/match_ip_bench.pl Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/Net::IP::Match.3 Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/Net::IP::match_ip_bench.3 Appending installation info to /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64/perllocal.pod