Cannot determine perl version info from lib/Catalyst/Controller/FormBuilder.pm
Cannot determine license info from lib/Catalyst/Controller/FormBuilder.pm
Warning: prerequisite CGI::FormBuilder 3.02 not found.
Warning: prerequisite Catalyst::Runtime 5.7 not found.
Warning: prerequisite Test::WWW::Mechanize::Catalyst 0.37 not found.
*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- CGI::FormBuilder               ...missing. (would need 3.02)
- Catalyst::Runtime              ...missing. (would need 5.7)
- Class::Accessor::Fast          ...loaded. (0.31 >= 0.25)
- Test::WWW::Mechanize::Catalyst ...missing. (would need 0.37)
- Tie::IxHash                    ...loaded. (1.21 >= 1.21)
- Class::Data::Inheritable       ...loaded. (0.06 >= 0.04)
- Class::Inspector               ...loaded. (1.18 >= 1.13)
- Scalar::Util                   ...loaded. (1.19 >= 1.19)
==> Auto-install the 3 mandatory module(s) from CPAN? [Y/n] y
*** Dependencies will be installed the next time you type 'nmake'.
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Writing Makefile for Catalyst::Controller::FormBuilder

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

	C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" Makefile.PL --config= --installdeps=CGI::FormBuilder,3.02,Catalyst::Runtime,5.7,Test::WWW::Mechanize::Catalyst,0.37
Cannot determine perl version info from lib/Catalyst/Controller/FormBuilder.pm
Cannot determine license info from lib/Catalyst/Controller/FormBuilder.pm
*** Installing dependencies...
[MSG] No 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\custom-sources' dir, skipping custom sources
*** Installing CGI::FormBuilder...
[ERROR] Unable to extract 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\authors\id\N\NW\NWIGER\CGI-FormBuilder-3.0501.tgz' to 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\5.10.0\build': Extract failed, no extractor found

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at C:\cpanrun\build\5-10-0\lib/CPANPLUS/Backend.pm line 395
*** CGI::FormBuilder installation cancelled.
*** Installing Catalyst::Runtime...
[ERROR] Unable to extract 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\authors\id\M\MR\MRAMBERG\Catalyst-Runtime-5.7012.tar.gz' to 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\5.10.0\build': Extract failed, no extractor found

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at C:\cpanrun\build\5-10-0\lib/CPANPLUS/Backend.pm line 395
*** Catalyst::Runtime installation cancelled.
*** Installing Test::WWW::Mechanize::Catalyst...
[ERROR] Unable to extract 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\authors\id\L\LB\LBROCARD\Test-WWW-Mechanize-Catalyst-0.41.tar.gz' to 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\5.10.0\build': Extract failed, no extractor found

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at C:\cpanrun\build\5-10-0\lib/CPANPLUS/Backend.pm line 395
*** Test::WWW::Mechanize::Catalyst installation cancelled.
*** Module::AutoInstall installation finished.
cp lib/Catalyst/Controller/FormBuilder/Action/HTML/Template.pm blib\lib\Catalyst\Controller\FormBuilder\Action\HTML\Template.pm
cp lib/Catalyst/Controller/FormBuilder/Action.pm blib\lib\Catalyst\Controller\FormBuilder\Action.pm
cp lib/Catalyst/Controller/FormBuilder/Action/Mason.pm blib\lib\Catalyst\Controller\FormBuilder\Action\Mason.pm
cp lib/Catalyst/Controller/FormBuilder.pm blib\lib\Catalyst\Controller\FormBuilder.pm
cp lib/Catalyst/Controller/FormBuilder/Action/TT.pm blib\lib\Catalyst\Controller\FormBuilder\Action\TT.pm

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

	C:\cpanrun\build\5-10-0\bin\perl.exe "-Iinc" Makefile.PL --config= --installdeps=CGI::FormBuilder,3.02,Catalyst::Runtime,5.7,Test::WWW::Mechanize::Catalyst,0.37
Cannot determine perl version info from lib/Catalyst/Controller/FormBuilder.pm
Cannot determine license info from lib/Catalyst/Controller/FormBuilder.pm
*** Installing dependencies...
[MSG] No 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\custom-sources' dir, skipping custom sources
*** Installing CGI::FormBuilder...
[ERROR] Unable to extract 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\authors\id\N\NW\NWIGER\CGI-FormBuilder-3.0501.tgz' to 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\5.10.0\build': Extract failed, no extractor found

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at C:\cpanrun\build\5-10-0\lib/CPANPLUS/Backend.pm line 395
*** CGI::FormBuilder installation cancelled.
*** Installing Catalyst::Runtime...
[ERROR] Unable to extract 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\authors\id\M\MR\MRAMBERG\Catalyst-Runtime-5.7012.tar.gz' to 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\5.10.0\build': Extract failed, no extractor found

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at C:\cpanrun\build\5-10-0\lib/CPANPLUS/Backend.pm line 395
*** Catalyst::Runtime installation cancelled.
*** Installing Test::WWW::Mechanize::Catalyst...
[ERROR] Unable to extract 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\authors\id\L\LB\LBROCARD\Test-WWW-Mechanize-Catalyst-0.41.tar.gz' to 'C:\Documents and Settings\cpanrun\Application Data\.cpanplus\5.10.0\build': Extract failed, no extractor found

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at C:\cpanrun\build\5-10-0\lib/CPANPLUS/Backend.pm line 395
*** Test::WWW::Mechanize::Catalyst installation cancelled.
*** Module::AutoInstall installation finished.
	C:\cpanrun\build\5-10-0\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib\lib', 'blib\arch')" t/00-load.t t/01-basic.t t/02-edit.t t/03-attr_param.t
t/00-load..........1..1
ok 1 - use Catalyst::Controller::FormBuilder;
# Testing Catalyst::Controller::FormBuilder 0.04
ok
t/01-basic.........1..4
Can't locate Test/WWW/Mechanize/Catalyst.pm in @INC (@INC contains: C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Catalyst-Controller-FormBuilder/t/lib C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\inc C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\blib\lib C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\blib\arch C:/cpanrun/build/5-10-0/site/lib C:/cpanrun/build/5-10-0/lib .) at t/01-basic.t line 7.
BEGIN failed--compilation aborted at t/01-basic.t line 7.
dubious
	Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-4
	Failed 4/4 tests, 0.00% okay
t/02-edit..........1..8
Can't locate Test/WWW/Mechanize/Catalyst.pm in @INC (@INC contains: C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Catalyst-Controller-FormBuilder/t/lib C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\inc C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\blib\lib C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\blib\arch C:/cpanrun/build/5-10-0/site/lib C:/cpanrun/build/5-10-0/lib .) at t/02-edit.t line 7.
BEGIN failed--compilation aborted at t/02-edit.t line 7.
dubious
	Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-8
	Failed 8/8 tests, 0.00% okay
t/03-attr_param....1..3
Can't locate Test/WWW/Mechanize/Catalyst.pm in @INC (@INC contains: C:/cpanrun/depot/main/contrib-patched/perl/CPAN/src/Catalyst-Controller-FormBuilder/t/lib C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\inc C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\blib\lib C:\cpanrun\depot\main\contrib-patched\perl\CPAN\src\Catalyst-Controller-FormBuilder\blib\arch C:/cpanrun/build/5-10-0/site/lib C:/cpanrun/build/5-10-0/lib .) at t/03-attr_param.t line 9.
BEGIN failed--compilation aborted at t/03-attr_param.t line 9.
dubious
	Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-3
	Failed 3/3 tests, 0.00% okay
Failed Test       Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/01-basic.t         2   512     4    8  1-4
t/02-edit.t          2   512     8   16  1-8
t/03-attr_param.t    2   512     3    6  1-3
Failed 3/4 test scripts. 15/16 subtests failed.
Files=4, Tests=16,  1 wallclock secs ( 0.00 cusr +  0.00 csys =  0.00 CPU)
Failed 3/4 test programs. 15/16 subtests failed.
NMAKE : fatal error U1077: 'C:\cpanrun\build\5-10-0\bin\perl.exe' : return code '0x2'
Stop.