Checking if your kit is complete...
Looks good
Writing Makefile for AI::NNFlex
cp lib/AI/NNFlex/Backprop.pm blib/lib/AI/NNFlex/Backprop.pm
cp lib/AI/NNFlex/Mathlib.pm blib/lib/AI/NNFlex/Mathlib.pm
cp lib/AI/NNFlex/Reinforce.pm blib/lib/AI/NNFlex/Reinforce.pm
cp lib/AI/NNFlex/Feedforward.pm blib/lib/AI/NNFlex/Feedforward.pm
cp lib/AI/NNFlex.pm blib/lib/AI/NNFlex.pm
cp lib/AI/NNFlex/Dataset.pm blib/lib/AI/NNFlex/Dataset.pm
cp lib/AI/NNFlex/Hopfield.pm blib/lib/AI/NNFlex/Hopfield.pm
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.6.1/bin/perl -Iblib/arch -Iblib/lib -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi -I/home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=1; runtests @ARGV;' t/*.t
t/Backprop.....1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/Dataset......1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
t/Hopfield.....1..4
ok 1 # skip
ok 2 # skip
ok 3 # skip
ok 4 # skip
ok
        4/4 skipped: 
t/backprop.....1..8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/reinforce....1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
All tests successful, 4 subtests skipped.
Files=5, Tests=39,  5 wallclock secs ( 4.08 cusr +  0.27 csys =  4.35 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex/Backprop.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex/Mathlib.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex/Reinforce.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex/Feedforward.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex/Dataset.pm
Installing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/AI/NNFlex/Hopfield.pm
Writing /home/cpanrun/pa-risc1.1/build/5.6.1/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi/auto/AI/NNFlex/.packlist
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.6.1/lib/5.6.1/PA-RISC1.1-thread-multi/perllocal.pod