Checking if your kit is complete...
Looks good
Writing Makefile for Proc::SafePipe
cp SafePipe.pm blib/lib/Proc/SafePipe.pm
Manifying blib/man3/Proc::SafePipe.3
PERL_DL_NONLAZY=1 /home/cpanrun/pa-risc1.1/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" *.t
test....1..13
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok
All tests successful.
Files=1, Tests=13,  1 wallclock secs ( 0.36 cusr +  0.09 csys =  0.45 CPU)
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/lib/site_perl/5.8.2/Proc/SafePipe.pm
Installing /home/cpanrun/pa-risc1.1/build/5.8.2/man/man3/Proc::SafePipe.3
Appending installation info to /home/cpanrun/pa-risc1.1/build/5.8.2/lib/5.8.2/PA-RISC1.1-thread-multi/perllocal.pod