Checking if your kit is complete...
Looks good
Writing Makefile for Config::Properties::Simple
cp Simple.pm blib/lib/Config/Properties/Simple.pm
Manifying blib/man3/Config::Properties::Simple.3
PERL_DL_NONLAZY=1 /home/cpanrun/parisc2.0-lp64/build/5.8.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/1_read....1..19
ok 1 - use Config::Properties::Simple;
ok 2 - reading
ok 3 - read value
ok 4 - default value
ok 5 - undefined
ok 6 - unexistant
ok 7 - required ok
ok 8 - required ok 2
ok 9 - required fail
ok 10 - required default ok
ok 11 - validate array ok
ok 12 - validate array fail
ok 13 - load 9
ok 14 - alias 1
ok 15 - alias 2
ok 16 - alias 3
ok 17 - cascade
ok 18 - cascade 2
ok 19 - cascade 3
ok
All tests successful.
Files=1, Tests=19,  1 wallclock secs ( 0.38 cusr +  0.08 csys =  0.46 CPU)
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/site_perl/5.8.2/Config/Properties/Simple.pm
Installing /home/cpanrun/parisc2.0-lp64/build/5.8.2/man/man3/Config::Properties::Simple.3
Appending installation info to /home/cpanrun/parisc2.0-lp64/build/5.8.2/lib/5.8.2/PA-RISC2.0-thread-multi-LP64/perllocal.pod